Home > Canon > Printer > Canon Imageformula Dr C225 User Guide

Canon Imageformula Dr C225 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageformula Dr C225 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							81
    Click [Image processing] and specify the rotation angle in [Document 
    Orientation] in the dialog box that appears.
    When you want to set the scanner conditions 
    automatically
    ###HOME > Chapter 8 Special Scanning > When you want to set the 
    scanner conditions automatically###
    Set [Full Automatic Mode] in [User Preference] to scan with scanning 
    conditions that match the document.
     
    						
    							82
    Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning 
    conditions that match the document.
    When you want to use batch separation for 
    scanning
    ###HOME > Chapter 8 Special Scanning > When you want to use batch 
    separation for scanning###
    When you want to divide and scan a document, you can separate a batch 
    at the timing with which each next document is placed and scanned. In 
    this case, set the scanner driver as follows.
    zSet [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or 
    [Automatic Feeding].
    When [Full Automatic Mode] is selected, [Color mode], [Page Size], 
    and [Dots per inch] are all detected automatically. In addition, the 
    [Scanning Side] setting becomes [Skip blank page] and [Document 
    Orientation] becomes [Text orientation recognition].
     
    						
    							83
    zSet [Batch Separation] on the [Others] tab to [Auto] or [Panel].
    When [Batch Separation] is set to [Auto], the batch is separated after the 
    next document is placed and scanning is continued. When [Panel] is set, 
    the batch is separated after the [Batch Separation] check box of Scan 
    Panel on p.86 is selected and then scanning is continued.When you want to use multistream settings 
    for scanning
    ###HOME > Chapter 8 Special Scanning > When you want to use 
    multistream settings for scanning###
    Multistream settings allow you to output multiple different scanned images 
    with a single scan operation, and output scanned images with different 
    scanning conditions for each of the front and back pages.
    When you want to use the multistream settings for scanning, select the 
    [Use MultiStream] checkbox on the [Others] tab to display the setting 
    items related to multistream, and then configure the setting items in the 
    following order.
    This function is only enabled for applications that support batch 
    separation.
    zThe multistream settings can only be used in Windows.
    zDepending on the application program, these settings may not 
    appear.
     
    						
    							84
    (1) When you want to specify different scanning conditions for the front 
    and back pages of a document, select [Skip Blank Page] or [Both] for 
    [Scanning Side] on the [Basic] tab in advance.
    (2) Specify the number of scanning conditions to apply in [Stream count 
    of Front]. Up to three can be specified.
    (3) Select [Front 1st], and then open the other tabs and set the scanning 
    conditions. Depending on the value specified for [Stream count of 
    Front], configure the remaining [Front 2nd] and [Front 3rd] in the 
    same way.
    (4) When specifying the scanning conditions of the back, configure the 
    settings in the same way as described in (1) to (3). In this case, 
    specify [Stream count of Back], and then set the scanning conditions 
    for each of [Back 1st] to [Back 3rd].
    The following shows the setting conditions that can be set in the 
    multistream settings.
    Tab Items that can be set
    [Basic] tab [Color mode] and [Dots per inch] (excluding 
    [Detect automatically] for both)
    [Brightness] tab [Brightness] and [Contrast]
    [Image processing] tab [Edge emphasis], [Color drop-out] and 
    [Character Emphasis]
    [Feeding] tab None (all disabled)
    [Others] tab None (only [Use MultiStream] is enabled)
     
    						
    							85 When you want to save a scanner driver 
    setting
    ###HOME > Chapter 8 Special Scanning > When you want to save a 
    scanner driver setting###
    When you finish configuring a setting, click the [Save] button of [User 
    Preference] to save the setting.
    The saved setting is registered to the list. You can delete a setting from the 
    list with the [Delete] button, and save or load a configuration file with the 
    [Back Up] or [Restore] button.When you finish configuring a setting, select [Add/Delete] of [Favorite 
    Settings] to save the setting.
    Clicking the [Add] button registers the current setting to [Favorite Setting 
    List]. Use the [Delete] button to delete a setting from the list.
    The preregistered [Full Automatic Mode] cannot be deleted from 
    [User Preference].
    The preregistered [Full Automatic Mode] cannot be deleted from 
    [Favorite Setting List].
     
    						
    							86
    Scan Panel
    ###HOME > Chapter 8 Special Scanning > Scan Panel###
    Scan Panel is software for controlling scanning operations such as feeding 
    documents and stopping scanning when scanning multiple documents 
    one after the other.
    Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or 
    [Automatic Feeding] in the settings dialog box of the scanner driver. In this 
    case, the Scan Panel appears when you are not scanning and the scanner 
    enters the wait state.
      If you place the next document and then click the [START] button in Scan 
    Panel, scanning of the placed document starts.
    You can stop scanning part way through by clicking the [STOP] button of 
    Scan Panel.If you click [More] in the settings screen of the scanner driver and then set 
    [Feeding Option] to [Panel-Feeding] or [Automatic Feeding] in the dialog 
    box which appears, Scan Panel appears when the scanner starts.
    When scanning of the first document finishes, Scan Panel appears and 
    the scanner enters the wait state. If you place the next document and then 
    click [Continue scanning], scanning of the placed document starts.
    You can stop scanning part way through by clicking [Finish].
    When [Batch Separation] on the [Others] tab is set to [Panel], you 
    can separate the batch by selecting [Batch Separation] in Scan 
    Panel and then clicking [START].
     
    						
    							87
    Chapter 9 Regular Maintenance
    ###HOME > Chapter 9 Regular Maintenance###
    Clean the scanner and perform maintenance on a regular basis as 
    described below to maintain peak scanning quality.
    Cleaning the Scanner ......................................................................... 87
    Cleaning the Scanning Glass and the Rollers ................................. 88
    Adjusting the Reduction Ratio .......................................................... 91
    „When cleaning the scanner and the inside of the scanner, turn the 
    power OFF and disconnect the power cord from the power outlet.
    „Do not use spray cleaners to clean the scanner. Precision 
    mechanisms, such as the light source, may get wet, and cause a 
    malfunction.
    „Never use paint thinner, alcohol, or other organic solvents to clean 
    the scanner. Such solvents can damage or discolor the exterior of the 
    scanner, or create a risk of fire or electrical shock.
    Cleaning the Scanner
    ###HOME > Chapter 9 Regular Maintenance > Cleaning the Scanner###
    To clean the exterior of the scanner, dampen a cloth with water or a 
    mild detergent, wring the cloth out thoroughly, and then wipe the dirt 
    away. Then use a dry, soft cloth to wipe away any moisture.
    Cleaning the Inside of the Scanner
    Dust or paper particles inside the scanner may cause lines or smudges to 
    appear on scanned images. Use compressed air to periodically clean dust 
    and paper particles from the document feed opening and the inside of the 
    scanner. After finishing a large scanning job, turn OFF the scanner and 
    then clean out any paper particles remaining inside the scanner.
     
    						
    							88
    Cleaning the Scanning Glass and the Rollers
    ###HOME > Chapter 9 Regular Maintenance > Cleaning the Scanning 
    Glass and the Rollers###
    If scanned images contain streaks, or if the scanned documents 
    become dirty, the scanning glass or rollers inside the scanner may 
    be dirty. Clean them periodically.
    1Open the document feed tray. Press the OPEN button and pull open 
    the front unit toward you.
    2Use compressed air to remove dust and paper particles from the 
    inside of the scanner.
    3Clean the scanning glass.
    Wipe the scanning glass with a cloth that has been dampened with water and 
    thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture.
    Do not spray water or neutral detergent directly on the scanner. 
    Precision mechanisms, such as the light source, may get wet, and 
    cause a malfunction.
    Scratches on the scanning glass may cause marks on the images, as 
    well as feeding errors. If there are scratches on the scanning glass, 
    contact your local authorized Canon dealer or service representative.
     
    						
    							89
    4Clean the rollers.
    Wipe the rollers with a cloth that has been dampened with water and thoroughly 
    wrung out, and then use a dry, soft cloth to wipe away any moisture.
    5Remove the retard roller and feed roller. (See Replacing the Feed 
    Roller on p.96, Replacing the Retard Roller on p.97)
    6Wipe the removed rollers with a cloth that has been dampened with 
    water and thoroughly wrung out.
    7Reattach the retard roller and feed roller. (See Replacing the Feed 
    Roller on p.96, Replacing the Retard Roller on p.97)
    8Close the front unit by gently pushing it up on both sides until it clicks 
    into place. Make sure that the front unit is completely closed by 
    pushing until you hear a click.
    9Close the document feed tray.
    Remove the retard roller and feed roller from the scanner to clean them, 
    and make sure to reattach them to the scanner when cleaning is 
    finished.
     
    						
    							90
    10Open the document eject pocket.
    11Clean the rollers inside the document eject pocket.
    Wipe the rollers with a cloth that has been dampened with water and thoroughly 
    wrung out, and then use a dry, soft cloth to wipe away any moisture.
    12Close the document eject pocket.
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageformula Dr C225 User Guide