Canon Imageformula Dr C225 User Guide
Here you can view all the pages of manual Canon Imageformula Dr C225 User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81
Click [Image processing] and specify the rotation angle in [Document
Orientation] in the dialog box that appears.
When you want to set the scanner conditions
automatically
###HOME > Chapter 8 Special Scanning > When you want to set the
scanner conditions automatically###
Set [Full Automatic Mode] in [User Preference] to scan with scanning
conditions that match the document.](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-80.png "Page 81
81
Click [Image processing] and specify the rotation angle in [Document
Orientation] in the dialog box that appears.
When you want to set the scanner conditions
automatically
###HOME > Chapter 8 Special Scanning > When you want to set the
scanner conditions automatically###
Set [Full Automatic Mode] in [User Preference] to scan with scanning
conditions that match the document.")
81 Click [Image processing] and specify the rotation angle in [Document Orientation] in the dialog box that appears. When you want to set the scanner conditions automatically ###HOME > Chapter 8 Special Scanning > When you want to set the scanner conditions automatically### Set [Full Automatic Mode] in [User Preference] to scan with scanning conditions that match the document.
Page 82
![Page 82
82
Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning
conditions that match the document.
When you want to use batch separation for
scanning
###HOME > Chapter 8 Special Scanning > When you want to use batch
separation for scanning###
When you want to divide and scan a document, you can separate a batch
at the timing with which each next document is placed and scanned. In
this case, set the scanner driver as follows.
zSet [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-81.png "Page 82
82
Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning
conditions that match the document.
When you want to use batch separation for
scanning
###HOME > Chapter 8 Special Scanning > When you want to use batch
separation for scanning###
When you want to divide and scan a document, you can separate a batch
at the timing with which each next document is placed and scanned. In
this case, set the scanner driver as follows.
zSet [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or...")
82 Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning conditions that match the document. When you want to use batch separation for scanning ###HOME > Chapter 8 Special Scanning > When you want to use batch separation for scanning### When you want to divide and scan a document, you can separate a batch at the timing with which each next document is placed and scanned. In this case, set the scanner driver as follows. zSet [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or...
Page 83
![Page 83
83
zSet [Batch Separation] on the [Others] tab to [Auto] or [Panel].
When [Batch Separation] is set to [Auto], the batch is separated after the
next document is placed and scanning is continued. When [Panel] is set,
the batch is separated after the [Batch Separation] check box of Scan
Panel on p.86 is selected and then scanning is continued.When you want to use multistream settings
for scanning
###HOME > Chapter 8 Special Scanning > When you want to use
multistream settings for scanning###...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-82.png "Page 83
83
zSet [Batch Separation] on the [Others] tab to [Auto] or [Panel].
When [Batch Separation] is set to [Auto], the batch is separated after the
next document is placed and scanning is continued. When [Panel] is set,
the batch is separated after the [Batch Separation] check box of Scan
Panel on p.86 is selected and then scanning is continued.When you want to use multistream settings
for scanning
###HOME > Chapter 8 Special Scanning > When you want to use
multistream settings for scanning###...")
83 zSet [Batch Separation] on the [Others] tab to [Auto] or [Panel]. When [Batch Separation] is set to [Auto], the batch is separated after the next document is placed and scanning is continued. When [Panel] is set, the batch is separated after the [Batch Separation] check box of Scan Panel on p.86 is selected and then scanning is continued.When you want to use multistream settings for scanning ###HOME > Chapter 8 Special Scanning > When you want to use multistream settings for scanning###...
Page 84
![Page 84
84
(1) When you want to specify different scanning conditions for the front
and back pages of a document, select [Skip Blank Page] or [Both] for
[Scanning Side] on the [Basic] tab in advance.
(2) Specify the number of scanning conditions to apply in [Stream count
of Front]. Up to three can be specified.
(3) Select [Front 1st], and then open the other tabs and set the scanning
conditions. Depending on the value specified for [Stream count of
Front], configure the remaining [Front 2nd] and [Front 3rd]...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-83.png "Page 84
84
(1) When you want to specify different scanning conditions for the front
and back pages of a document, select [Skip Blank Page] or [Both] for
[Scanning Side] on the [Basic] tab in advance.
(2) Specify the number of scanning conditions to apply in [Stream count
of Front]. Up to three can be specified.
(3) Select [Front 1st], and then open the other tabs and set the scanning
conditions. Depending on the value specified for [Stream count of
Front], configure the remaining [Front 2nd] and [Front 3rd]...")
84 (1) When you want to specify different scanning conditions for the front and back pages of a document, select [Skip Blank Page] or [Both] for [Scanning Side] on the [Basic] tab in advance. (2) Specify the number of scanning conditions to apply in [Stream count of Front]. Up to three can be specified. (3) Select [Front 1st], and then open the other tabs and set the scanning conditions. Depending on the value specified for [Stream count of Front], configure the remaining [Front 2nd] and [Front 3rd]...
Page 85
![Page 85
85 When you want to save a scanner driver
setting
###HOME > Chapter 8 Special Scanning > When you want to save a
scanner driver setting###
When you finish configuring a setting, click the [Save] button of [User
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting from the
list with the [Delete] button, and save or load a configuration file with the
[Back Up] or [Restore] button.When you finish configuring a setting, select [Add/Delete] of [Favorite...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-84.png "Page 85
85 When you want to save a scanner driver
setting
###HOME > Chapter 8 Special Scanning > When you want to save a
scanner driver setting###
When you finish configuring a setting, click the [Save] button of [User
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting from the
list with the [Delete] button, and save or load a configuration file with the
[Back Up] or [Restore] button.When you finish configuring a setting, select [Add/Delete] of [Favorite...")
85 When you want to save a scanner driver setting ###HOME > Chapter 8 Special Scanning > When you want to save a scanner driver setting### When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting. The saved setting is registered to the list. You can delete a setting from the list with the [Delete] button, and save or load a configuration file with the [Back Up] or [Restore] button.When you finish configuring a setting, select [Add/Delete] of [Favorite...
Page 86
![Page 86
86
Scan Panel
###HOME > Chapter 8 Special Scanning > Scan Panel###
Scan Panel is software for controlling scanning operations such as feeding
documents and stopping scanning when scanning multiple documents
one after the other.
Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or
[Automatic Feeding] in the settings dialog box of the scanner driver. In this
case, the Scan Panel appears when you are not scanning and the scanner
enters the wait state.
If you place the next document and...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-85.png "Page 86
86
Scan Panel
###HOME > Chapter 8 Special Scanning > Scan Panel###
Scan Panel is software for controlling scanning operations such as feeding
documents and stopping scanning when scanning multiple documents
one after the other.
Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or
[Automatic Feeding] in the settings dialog box of the scanner driver. In this
case, the Scan Panel appears when you are not scanning and the scanner
enters the wait state.
If you place the next document and...")
86 Scan Panel ###HOME > Chapter 8 Special Scanning > Scan Panel### Scan Panel is software for controlling scanning operations such as feeding documents and stopping scanning when scanning multiple documents one after the other. Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or [Automatic Feeding] in the settings dialog box of the scanner driver. In this case, the Scan Panel appears when you are not scanning and the scanner enters the wait state. If you place the next document and...
Page 87
87 Chapter 9 Regular Maintenance ###HOME > Chapter 9 Regular Maintenance### Clean the scanner and perform maintenance on a regular basis as described below to maintain peak scanning quality. Cleaning the Scanner ......................................................................... 87 Cleaning the Scanning Glass and the Rollers ................................. 88 Adjusting the Reduction Ratio .......................................................... 91 „When cleaning the scanner and the inside of...
Page 88
88 Cleaning the Scanning Glass and the Rollers ###HOME > Chapter 9 Regular Maintenance > Cleaning the Scanning Glass and the Rollers### If scanned images contain streaks, or if the scanned documents become dirty, the scanning glass or rollers inside the scanner may be dirty. Clean them periodically. 1Open the document feed tray. Press the OPEN button and pull open the front unit toward you. 2Use compressed air to remove dust and paper particles from the inside of the scanner. 3Clean the scanning...
Page 89
89 4Clean the rollers. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture. 5Remove the retard roller and feed roller. (See Replacing the Feed Roller on p.96, Replacing the Retard Roller on p.97) 6Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out. 7Reattach the retard roller and feed roller. (See Replacing the Feed Roller on p.96, Replacing the Retard Roller on...
Page 90
90 10Open the document eject pocket. 11Clean the rollers inside the document eject pocket. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture. 12Close the document eject pocket.