Canon Imageformula Dr C225 User Guide
Here you can view all the pages of manual Canon Imageformula Dr C225 User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
31 Placing Cards ###HOME > Chapter 5 Placing Documents > Placing Cards### 1Set the feed selection lever and the eject selection lever. Set the feed selection lever to the non separation position (upper position). The feed selection indicator will light orange. Set the eject selection lever to the straight path position ( ). 2Adjust the document guides to fit the width of the card to be scanned. 3Place the card horizontally with the top edge facing upward. zPlace the card one at a time. zIf you place...
Page 32
32 Placing Folded Documents ###HOME > Chapter 5 Placing Documents > Placing Folded Documents### Folio Scan enables you to scan documents that are larger than LTR/ A4 and therefore do not fit in the feeder. To use the function, fold the document in half lengthwise and place it into the feeder. The DR-C225 will scan both sides and combine the scanned images into a single image. 1Set the feed selection lever and the eject selection lever. Set the feed selection lever to the non separation position...
Page 33
![Page 33
33
3Place the document in the document feed tray.
Under default conditions, place the document with the folded edge facing right.
If the [Upside-down feeding] check box is selected in the scanner driver
settings, place the document with the folded edge facing left.
Setting Scanning Conditions
Configure scanning conditions as follows when scanning folded
documents.
Adjust the document guides to fit the width of the document. Otherwise,
the image may scan as skewed or shifted.
zThe side of the folded...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-32.png "Page 33
33
3Place the document in the document feed tray.
Under default conditions, place the document with the folded edge facing right.
If the [Upside-down feeding] check box is selected in the scanner driver
settings, place the document with the folded edge facing left.
Setting Scanning Conditions
Configure scanning conditions as follows when scanning folded
documents.
Adjust the document guides to fit the width of the document. Otherwise,
the image may scan as skewed or shifted.
zThe side of the folded...")
33 3Place the document in the document feed tray. Under default conditions, place the document with the folded edge facing right. If the [Upside-down feeding] check box is selected in the scanner driver settings, place the document with the folded edge facing left. Setting Scanning Conditions Configure scanning conditions as follows when scanning folded documents. Adjust the document guides to fit the width of the document. Otherwise, the image may scan as skewed or shifted. zThe side of the folded...
Page 34
![Page 34
34
Scanner driver (Windows)
Configure the following settings in the [Basic] tab. (Confirming Basic
Conditions for Scanning on p.64)
zSet [Page Size] to half the size of the document (set to [Match original
size] when scanning an atypical document size)
zSet [Scanning Side] to [Folio].
Scanner driver (OS X)
Configure the following settings. (Page Size on p.66)
zSet [Page Size] to half the size of the document (set to [Detect
automatically] when scanning an atypical document size)
zSet [Scanning Side]...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-33.png "Page 34
34
Scanner driver (Windows)
Configure the following settings in the [Basic] tab. (Confirming Basic
Conditions for Scanning on p.64)
zSet [Page Size] to half the size of the document (set to [Match original
size] when scanning an atypical document size)
zSet [Scanning Side] to [Folio].
Scanner driver (OS X)
Configure the following settings. (Page Size on p.66)
zSet [Page Size] to half the size of the document (set to [Detect
automatically] when scanning an atypical document size)
zSet [Scanning Side]...")
34 Scanner driver (Windows) Configure the following settings in the [Basic] tab. (Confirming Basic Conditions for Scanning on p.64) zSet [Page Size] to half the size of the document (set to [Match original size] when scanning an atypical document size) zSet [Scanning Side] to [Folio]. Scanner driver (OS X) Configure the following settings. (Page Size on p.66) zSet [Page Size] to half the size of the document (set to [Detect automatically] when scanning an atypical document size) zSet [Scanning Side]...
Page 35
![Page 35
35
3Click [CANON DR-C225 USB] and click [Properties].4Click the [Maintenance] tab, and then select a Long Document mode.
Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000
mm)] depending on the length of the document.
5Click [OK].
Setting Scanning Conditions
Configure scanning conditions as follows when scanning documents in
Long Document mode.
CaptureOnTouch
Set [Page Size] to [Match original size] under [Scanner setting]. (Select
document settings on p.52)
Scanner driver
Set [Page...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-34.png "Page 35
35
3Click [CANON DR-C225 USB] and click [Properties].4Click the [Maintenance] tab, and then select a Long Document mode.
Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000
mm)] depending on the length of the document.
5Click [OK].
Setting Scanning Conditions
Configure scanning conditions as follows when scanning documents in
Long Document mode.
CaptureOnTouch
Set [Page Size] to [Match original size] under [Scanner setting]. (Select
document settings on p.52)
Scanner driver
Set [Page...")
35 3Click [CANON DR-C225 USB] and click [Properties].4Click the [Maintenance] tab, and then select a Long Document mode. Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000 mm)] depending on the length of the document. 5Click [OK]. Setting Scanning Conditions Configure scanning conditions as follows when scanning documents in Long Document mode. CaptureOnTouch Set [Page Size] to [Match original size] under [Scanner setting]. (Select document settings on p.52) Scanner driver Set [Page...
Page 36
![Page 36
36
1Opens the scanner drivers Detail Settings screen.
See Select document settings on p.52.
This will open the advanced settings dialog box for the scanner.
2Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3Click [Maintenance].
The [Maintenance] dialog box appears.
4Select [Long Document mode (1,000 mm)] or [Long Document mode
(3,000 mm)] depending on the length of the document.
5Click to close the dialog box.
Setting Scanning Conditions
Configure...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-35.png "Page 36
36
1Opens the scanner drivers Detail Settings screen.
See Select document settings on p.52.
This will open the advanced settings dialog box for the scanner.
2Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3Click [Maintenance].
The [Maintenance] dialog box appears.
4Select [Long Document mode (1,000 mm)] or [Long Document mode
(3,000 mm)] depending on the length of the document.
5Click to close the dialog box.
Setting Scanning Conditions
Configure...")
36 1Opens the scanner drivers Detail Settings screen. See Select document settings on p.52. This will open the advanced settings dialog box for the scanner. 2Click to display the [Scanner Information] dialog box. The [Scanner Information] dialog box appears. 3Click [Maintenance]. The [Maintenance] dialog box appears. 4Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000 mm)] depending on the length of the document. 5Click to close the dialog box. Setting Scanning Conditions Configure...
Page 37
37 Chapter 6 Scanning with CaptureOnTouch ###HOME > Chapter 6 Scanning with CaptureOnTouch### This section describes the scanning procedure when using CaptureOnTouch. What is CaptureOnTouch?................................................................. 37 Starting and Exiting CaptureOnTouch.............................................. 39 Screen Descriptions ........................................................................... 41 Standard Scanning...
Page 38
![Page 38
38
CaptureOnTouch is provided with multiple scanning methods that can be
selected according to the purpose and application.
CaptureOnTouch supports the following scanning methods.
Standard Scanning
Click the Select document and Output panels, and then click the [Scan]
button to scan the document. You can select the scan method according
to the document type and purpose of use before scanning.
-> Standard Scanning
Scanning Shortcut
You can register in advance combinations of frequently-used document...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-37.png "Page 38
38
CaptureOnTouch is provided with multiple scanning methods that can be
selected according to the purpose and application.
CaptureOnTouch supports the following scanning methods.
Standard Scanning
Click the Select document and Output panels, and then click the [Scan]
button to scan the document. You can select the scan method according
to the document type and purpose of use before scanning.
-> Standard Scanning
Scanning Shortcut
You can register in advance combinations of frequently-used document...")
38 CaptureOnTouch is provided with multiple scanning methods that can be selected according to the purpose and application. CaptureOnTouch supports the following scanning methods. Standard Scanning Click the Select document and Output panels, and then click the [Scan] button to scan the document. You can select the scan method according to the document type and purpose of use before scanning. -> Standard Scanning Scanning Shortcut You can register in advance combinations of frequently-used document...
Page 39
![Page 39
39
Starting and Exiting CaptureOnTouch
###HOME > Chapter 6 Scanning with CaptureOnTouch > Starting and
Exiting CaptureOnTouch###
By default, CaptureOnTouch becomes resident in the system when
you start your computer.
Double-click (CaptureOnTouch icon) in the taskbar to start
CaptureOnTouch and display the main window.
zYou can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon DR-C225] - [DR-C225
CaptureOnTouch].
zThe interval between the time you press the...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-38.png "Page 39
39
Starting and Exiting CaptureOnTouch
###HOME > Chapter 6 Scanning with CaptureOnTouch > Starting and
Exiting CaptureOnTouch###
By default, CaptureOnTouch becomes resident in the system when
you start your computer.
Double-click (CaptureOnTouch icon) in the taskbar to start
CaptureOnTouch and display the main window.
zYou can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon DR-C225] - [DR-C225
CaptureOnTouch].
zThe interval between the time you press the...")
39 Starting and Exiting CaptureOnTouch ###HOME > Chapter 6 Scanning with CaptureOnTouch > Starting and Exiting CaptureOnTouch### By default, CaptureOnTouch becomes resident in the system when you start your computer. Double-click (CaptureOnTouch icon) in the taskbar to start CaptureOnTouch and display the main window. zYou can also start CaptureOnTouch from the Start menu. Click [Start] - [All Programs] - [Canon DR-C225] - [DR-C225 CaptureOnTouch]. zThe interval between the time you press the...
Page 40
![Page 40
40
To close the CaptureOnTouch window, click at the top of the window.
This closes the window, but CaptureOnTouch will continue to reside in the
system.
click (CaptureOnTouch icon) in the menu bar, and select [Exit] from
the menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the system,
use one of the following procedures to restart it. CaptureOnTouch will start
and become resident in the system again.
zClick [Start] - [All Programs] - [Canon DR-C225] -...](http://img.usermanuals.tech/thumb/14/56346/w300_canon_imageformula_dr-c225-user-guide-39.png "Page 40
40
To close the CaptureOnTouch window, click at the top of the window.
This closes the window, but CaptureOnTouch will continue to reside in the
system.
click (CaptureOnTouch icon) in the menu bar, and select [Exit] from
the menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the system,
use one of the following procedures to restart it. CaptureOnTouch will start
and become resident in the system again.
zClick [Start] - [All Programs] - [Canon DR-C225] -...")
40 To close the CaptureOnTouch window, click at the top of the window. This closes the window, but CaptureOnTouch will continue to reside in the system. click (CaptureOnTouch icon) in the menu bar, and select [Exit] from the menu. Restarting CaptureOnTouch To use CaptureOnTouch after it has been made not resident in the system, use one of the following procedures to restart it. CaptureOnTouch will start and become resident in the system again. zClick [Start] - [All Programs] - [Canon DR-C225] -...