Canon Imageclass Mf8350cdn User Guide

3-5
Copying
  Copy  Settings  
        Enlarging/Reducing  Copies 
Copy mode screen  Setting screen*
 
Copy: Press Start
100% LTRDensity: 0
Original Type: Text...
2-Sided: Off
1
+-
1
  
Copy Ratio
Custom Ratio
100% Direct
400% Max
200%
   Select the copy ratio with [] or []  →
 [OK] 
 
  Load paper of the size to be output.  ( →
P.2-9) 
 
  Register the paper size to be output.  ( →
P.2-16) 
 To  n e x t  p a g e 
      Multiple Documents onto One Sheet ( N on 1)  
Copy mode screen  Setting screen*...

3-6
Copying
        Collating  Copies 
 Copy mode screen  Setting screen* 
 
Copy: Press Start
100% LTRDensity: 0
Original Type: Text...
2-Sided: Off
1
+-
1
 
Collate
Off
On
 
  Select  with [] or []  →
 [OK]
  Copy  Settings  
      Erase Dark Borders and Frame Lines ( Frame Erase)  
 Copy mode screen  Setting screen* 
 
Copy: Press Start
100% LTR
Non1:Off
Collate: Off
Erase Frame: Off
11
  
Erase FrameOff
On
Select  with [] or []  Select  with [] or []
 
Specify Frame Width
0_1/8 "
(1/16-1_15/16)...

3-7
Copying
 You can make a copy of a 2-sided card onto one side of a paper. 
 
COPYNon1
StartOK
Keys to be used for this operation
 
  1    Place a card on the platen glass, and then close the feeder. 
 Place the card with a 1/4" (5 mm) space created from the left edge 
of the platen glass.
Additionally, align the center of the card with the arrow mark. 
If you want to arrange the cards horizontally 
    
If you want to arrange the cards vertically
  
  2     Press []. 
  3    Press [] (N on 1)....

3-8
Copying
 The default values of the copy are the function which is applied 
when [
] (Reset) is pressed or the power is turned ON. You 
can change the default values to suit your needs. 
 You can register the following types of settings as the default 
values.   Quantity 
 Density 
 Original  type 
 2-Sided 
 Copy  ratio 
 Paper 
 N on 1 
 Collating 
 Frame  erase 
 Sharpness 
 
OK
Men
u
Keys to be used for this operation
 
  1  Press [] (Menu). 
  2    Select  with [] or [], and then 
press [OK]....

Chapter
 4
4-1
 This category describes how to print from computers. 
* If you are a Macintosh user, see the Printer Driver Guide.
    Printing from a Computer 
Installing the Printer Driver  4-2
Printing from a Computer  4-3
Scaling Print Output  4-3
Printing Multiple Pages on One Sheet  4-3
2-sided Printing (MF8350Cdn Only)  4-4
Checking/Deleting Print Jobs  4-4
Checking Print Status in the Middle of Printing or Waiting  4-5
Deleting Print Job in the Middle of Printing or Waiting  4-5
 

4-2
Printing from a Computer
 Installing the Printer Driver    The following procedures are required as the preparations 
for printing.
 Step  1 
 Select USB or network connection.  
      Starter  Guide →
 4 Connecting to a Computer and 
Installing the Drivers    
 Step  2   Install the printer driver. 
 You may also need to install Canon Driver Information 
Assist Service depending on your environment. 
  
    NOTE   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - - - - - -...

4-3
Printing from a Computer
 Printing from a Computer  
 Scaling Print Output 
You can enlarge or reduce documents to match the output 
paper size, such as reducing a document created in A4 size to 
print on B5, or enlarging a document created in B5 size to print 
on A4.
There are two methods for scaling a document: select the 
output size of the document to scale it automatically, or specify 
the scaling value manually.
    NOTE   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...

4-4
Printing from a Computer
  2    Select the page layout from [Page Layout]. 
  
    NOTE   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -\
 - -  
  If the options are not displayed for [Page Layout], display the [Device Settings] Sheet, then select [Auto] or [Enabled] from [Spooling at 
Host]. 
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -  
  3    Select the page order from [Page Order].  
  
The output image is displayed in the...

4-5
Printing from a Computer
 Checking Print Status in the Middle of Printing or Waiting 
    NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - -  
 If the Processing/Data Indicator on the operation panel is: 
 Turned  on/blinking 
 A job is being processed. 
 Turned  off  
 Not jobs are in the memory 
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -  
  1   Press [] (Status Monitor/Cancel). 
  2    Select  with [] or [], 
and...

4-6
Printing from a Computer