Canon Imageclass Mf8350cdn User Guide

2-5
Document and Paper Handling
  4    Neatly place the documents face up. 
 Load the paper under the load limit guides (A). 
 Make sure that the paper stack does not exceed the load limit 
mark (B). 
 
(A)
(B)
 
  5    Align the document guides with the width of the  document. 
 The machine is ready to scan the document. 
 
 
  
    IMPORTANT 
 Be sure to align the document guides with the width of 
the paper 
   If the document guides are too loose or too tight, this may result in  misfeeds or paper...

2-6
Document and Paper Handling
 Paper  Size 
 The available paper sizes are as follows.   
 
{: Available 
 Paper size    Paper  source   
 Paper cassette *1    Multi-purpose tray  
Manual feed slot
 A4 (8 1/4" x 11 3/4") (210.0 mm x 297.0 mm) *
2 *3   {  
{ 
 B5 (7 1/8" x 10 1/8") (182.0 mm x 257.0 mm) *2     {  
{ 
 A5 (5 7/8" x 8 1/4") (148.0 mm x 210.0 mm)     {  
{ 
 Legal (8 1/2" x 14") (215.9 mm x 355.6 mm)  *
2 
{   
{ 
 Letter (8 1/2" x 11") (215.9 mm x...

2-7
Document and Paper Handling
 Paper  Type 
 The available paper types are as follows. 
 Paper Type    Printer Driver Setting   Paper Source  
 Paper  Capacity 
 (Paper  Cassette)   Paper  Capacity 
 (Multi-purpose  Tray)    (Manual Feed Slot)
 Plain Paper *
1    16 to 19 lb Bond (60 to 74 
g/m
2)  
 [Plain  1] 
 MF8350Cdn: 250 sheets 
 MF8050Cn: 150 sheets  
•
•  MF8350Cdn: 50 sheets 
 MF8050Cn: 1 sheet  
•
•
 MF8350Cdn:
19 to 24 lb Bond (70 to 
90 g/m
2)  
 MF8050Cn:
20 to 24 lb Bond (75 to 
90 g/m...

2-8
Document and Paper Handling
  
1/4 in.
(5 mm) 1/4 in.
(5 mm) 1/4 in.
(5 mm)
1/4 in.
(5 mm)
   Prin table  Ra nge  The shaded area indicates the approximate printable area of A4 paper. Note that the margin 
widths listed below are rough standards and there may be slight variations in actual use.
 

2-9
Document and Paper Handling
    NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - -  
 If you use paper of a diff  erent size or type 
   The default paper size/type is set to  and  in the 
setting menu. If you use a diff  erent paper size or paper type, you need 
to change the paper settings. 
  
  "Setting a Paper Size and Type" ( →
P.2-16)  
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \
- - - - - - - - -  
 In the Paper...

2-10
Document and Paper Handling
 When loading envelopes 
 (1)  Close the envelope fl ap. 
  
 
 (2)  Place the stack of envelopes on a fl at surface, fl atten them  to release any remaining air, and be sure that the edges are 
pressed tightly. 
  
 
 (3)  Loosen any stiff    corners of the envelopes and fl atten curls as 
shown in the fi gure. 
   
 (4)  Align the edges of the envelopes on a fl at surface. 
  
 
 (5)  Load the envelopes into the paper cassette with the print side  up.  
  4    Align...

2-11
Document and Paper Handling
 MF8350Cdn 
  
 
 MF8050Cn   
  
 
  7    Specify the loaded paper size and type. 
    "Setting a Paper Size and Type" ( →
P.2-16) 
  
 In the Multi-Purpose Tray (for MF8350Cdn) 
  Before loading paper in the multi-purpose tray, see 
 "Precautions when Loading Paper" ( →
P.2-13) .  
 Use the multi-purpose tray when you want to copy or print on 
a paper that is diff   erent from what is in the paper cassette. 
  1    Open the multi-purpose tray. 
 Hold the...

2-12
Document and Paper Handling
 (2)  Place the stack of envelopes on a fl at surface. Flatten the envelopes by releasing any remaining air and creasing the 
edges. 
  
 
 (3)  Loosen any stiff    corners of the envelopes and fl atten curls as 
shown in the fi gure. 
  
 
 (4)  Align the edges of the envelopes on a fl at surface. 
  
 
 (5)  Gently insert the paper into the multi-purpose tray with the  print side up.  
  6    Align the paper guides with the width of the paper. 
   
  7    Specify the...

2-13
Document and Paper Handling
   Precautions  when  Loading  Paper 
 
    CAUTION  
 Be careful when handling paper 
 Handle paper carefully not to cut your hands with the edges of the 
paper.  
 Precautions when inserting the paper cassette 
 Be careful not to catch your fi ngers.     
    IMPORTANT 
 Be sure to align the paper guides with the width of the 
paper. 
   If the paper guides are too loose or too tight, this may result in 
misfeeds or paper jams.  
 When using paper that has been poorly...

2-14
Document and Paper Handling
   Paper  Loading  Orientation 
 Be sure to load paper in portrait orientation. 
 
O Paper cassette 
  
 
O Multi-purpose tray (MF8350Cdn Only) 
  
 
O 
Manual feed slot (MF8050Cn Only) 
  
 When printing paper with a letterhead or logo (previously printed paper) 
 Load the paper in the proper orientation as follows.   
 Paper  cassette 
  
 Portrait layout   Landscape layout  
1-sided printing
(When  "Selecting 
Print Side 
(MF8350Cdn 
Only)" ( →
P.2-19)   is...