Canon I Sensys Mf8540cdn User Guide

Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back on.
LINKS
Remote  UI Screens
Setting Menu List
>à>ã>Ý>Ì>Û>Ì>â>ã>â
 

0ALJ-0AS
Registering Address Book from Remote UI (MF8580Cdw / MF8550Cdn /
MF8540Cdn / MF8280Cw Only)
You  can register  or edit the  Address Book of the  machine by using the  computer.
NOTE
You  can change the  settings only when you have logged on  in System Manager  Mode.
Start  the Remote UI.  Starting Remote UI
Click [Address Book].
NOTE:
If the enter PIN page is  displayed
The Address Book is  protected  by a PIN. Enter the  [PIN] and  click [OK].
Click [Coded  Dial].
You  can also  register...

You  can delete  a registered item  by clicking  the  corresponding [Delete] button.
Select [Destination  Type to Register] and  click [OK].
Specify  required settings  and  click [OK].
LINKS
Remote  UI Screens
Saving/Loading Address Book (MF8580Cdw  / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
Address Book List (MF8580Cdw  / MF8550Cdn / MF8540Cdn / MF8280Cw Only)
5
6
>à>ã>ß>Ì>Û>Ì>â>ã>â
 

0ALJ-0AU
Setting Menu List
There  are  various settings in this machine. You  can adjust each of the  settings in detail. Access these settings by pressing .
TIPS
You  can print the  setting menu in list  form to  check  the  current  settings:
User Data  List/System  Manager  Data  List
>à>ã>à>Ì>Û>Ì>â>ã>â
 

0ALJ-0AW
Network Settings
All  the  settings about  the  network are  listed with short descriptions. Default  settings are  marked with a dagger
().
NOTE
Asterisks ( )
Settings marked with " " are  only available for  the  MF8580Cdw  / MF8280Cw.
Settings marked with " " are  only available for  the  MF8580Cdw  / MF8550Cdn / MF8540Cdn.
Select Wired/Wireless LAN
Wireless LAN Settings
TCP/IP Settings
SNMP  Settings
Dedicated Port Settings
Waiting Time for Connection at Startup
Ethernet...

Enter  Manually
Select to  configure a wireless connection by manually entering  an  SSID. By using this method, you can specify  authentication and
encryption settings in detail. Setting Up Connection by Specifying Detailed Settings
Security  Settings None
WEPOpen  System
Select WEP Key: 1/2/3/4
Edit  WEP Key
Shared  Key Select WEP Key: 1/2/3/4
Edit  WEP Key
WPA/WPA2-PSK Auto
AES-CCMP
Power Save Mode 
Select whether  or not  the  machine enters  Power Save  Mode based on  signals emitted  from the...

Gateway Address: 0.0.0.0
Check Settings Auto  Acquire
IP  Address
Subnet  Mask
Gateway Address
PING  Command
Select to  check  that  the  machine is  connected to  a computer  over a network. Testing the Network Connection
DNS Settings
Specify settings for  Domain  Name System (DNS),  which provides a host  name for  IP  address resolutions.  Configuring  DNS
DNS  Server Settings Primary DNS Server:  0.0.0.0
Secondary DNS Server:  0.0.0.0
DNS  Host Name/Domain Name  Settings Host Name
Domain  Name
DNS...

Prefix Length
DNS Settings
Specify settings for  Domain  Name System (DNS),  which provides a host  name for  IP  address resolutions.  Configuring  DNS
DNS  Host Name/Domain Name  Settings Use  IPv4  Host/DomainOffHost Name
Domain  Name
On
DNS  Dynamic  Update Settings Off
OnRegister Manual AddressOff
On
Register Stateful  Address Off
On
Register Stateless Address Off
On
DNS Dynamic Update Interval 0  to  24
 to  48 (hr.)
mDNS  Settings
Specify settings for  using DNS functions without DNS servers....

OnUse  WSD BrowsingOff
On
WSD Scan SettingsUse  WSD ScanOff
On
Use  Computer Scan Off
On
Use Multicast Discovery Off
On
Use HTTP
Enable or disable HTTP, which is  required for  communications  with a computer, such as when using the  Remote  UI, WSD printing,  or
printing with Google  Cloud Print.  Disabling HTTP  Communication
Off
On
Port  Number Settings
Change  port numbers  for  protocols according to  the  network environment. Changing Port Numbers
LPD 1  to  515
 to  65535
RAW 1  to  9100
 to...

On
SNMPv3 Settings
Enable or disable SNMPv3.  Use  the  Remote  UI to  specify  detailed settings that  are  applied when SNMPv3 is  enabled.Off
On
Acquire Printer Management Information  from Host
Enable or disable the  monitoring of printer management  information  from a networked computer  running  SNMP-compatible  software.Off
On
Enable or disable the  dedicated  port. The dedicated  port is  used when printing,  faxing, or scanning uses MF Toolbox  and  when br owsing
or specifying  the  machine...