Canon Faxphone L75 Laser Fax Printer Users Guide

Chapter 1 Introduction1-7
Introduction
Important Safety Instructions
Read these safety instructions thoroughly before using your machine.
c
Except as specifically described in this guide, do not attempt to service the machine
yourself. Never attempt to disassemble the machine: opening and removing its
interior covers will expose you to dangerous voltages and other risks. For all
service, contact the Canon Customer Care Center.
■Handling and Maintenance
•Follow all warnings and instructions marked on the...

1-8Introduction Chapter 1 •Unplug the machine from the wall outlet and contact the Canon Customer Care
Center in any of the following cases:
–If the power cord or plug is damaged or frayed.
–If liquid has spilled into the machine.
–If the machine has been exposed to rain or water.
–If the machine does not operate normally when you have followed the instructions in
this guide. Adjust only those controls that are covered by the instructions in this
guide. Improper adjustment of other controls may result in...

Chapter 1 Introduction1-9
Introduction
•Do not stack boxes or furniture around the power outlet. Keep the area free so you
can reach the outlet quickly. If you notice anything unusual (smoke, strange odors,
noises) around the machine, unplug the machine immediately. Contact the Canon
Customer Care Center.
•Do not allow anything to rest on the power cord, and do not place the machine where
the cord will be walked on. Make sure the cord is not knotted or kinked.
■Power Supply
•During electrical storms,...

1-10Introduction Chapter 1 

Chapter 2 Setting Up2-1
Setting Up
Chapter 2
Setting Up
This chapter explains all the necessary steps to get your machine ready for use. You
will find instructions for unpacking, assembling, and connecting your machine, and
learn how to install the cartridge and load paper.
Choosing a Location for the FAXPHONE...............................................2-2
Dimensions .............................................................................................2-2
Unpacking the...

2-2Setting Up Chapter 2
Choosing a Location for the FAXPHONE
Before unpacking your machine, be sure to choose a suitable location for it (1p. 1-8).
Dimensions
Make sure the location you choose provides enough space around the machine for
adequate ventilation, and to allow paper to flow freely into and out of the machine.
Leave approximately 4 inches (10 cm) space around all sides of the machine. The
illustrations below show the dimensions of the machine.
n
If you need help installing the machine or have...

Chapter 2 Setting Up2-3
Setting Up
Unpacking the FAXPHONE
Follow the directions below to unpack the 
machine properly and to make sure you
have all its components.
n
When lifting the machine out of the box
or when moving it, lift it from the
recessed areas on the sides of the
machine. Make sure you hold the
machine firmly and level.
Do You Have Everything?
Carefully remove all items from the box. You should have someone help you hold the
box while you lift out the machine and its protective packaging....

2-4Setting Up Chapter 2 If any items are damaged or missing, notify the Canon Customer Care Center
immediately.
n
•Important! Save your sales receipt for proof of purchase in case your machine requires
warranty service.
•If you are connecting your machine to a PC, you will need to purchase a USB cable 
(1
p.2-10).
HANDSET CRADLE
SCREWS WITH PLUGS (2)
RINGER VOLUME 
SWITCH
Use a pen or other 
pointed object to 
select the ring 
volume of the 
handset (HI, LO, 
or OFF).SPEAKER VOLUME 
SWITCH
Use a pen or...

Chapter 2 Setting Up2-5
Setting Up
Removing Shipping Materials
Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the machine in the future.
n
The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.
1Remove all shipping 
tapes from the 
machine.2Use both hands to 
gently open the 
operation panel (it 
only opens partially). 
Then remove the 
protective sheet from 
the ADF.
Close the operation 
panel by pressing it...

2-6Setting Up Chapter 2
Assembling the FAXPHONE
Follow this procedure to assemble your machine:
1Attach the paper 
loading warning   
label to the left of the 
multi-purpose tray.2Insert the tabs of the 
multi-purpose tray 
into the slots on the 
machine.
3Slide the multi-
purpose tray cover 
over the multi-
purpose tray. 
4Insert the ends of the 
document support 
into the slots on the 
machine.5Insert the tabs of one 
of the support trays 
into the corresponding 
slots above the face-
down delivery...