Canon Fax L380s User Guide

Restricting Use of the Machine9-4
Special Features
9
Restricting Use of the Machine
If you do not want unauthorized people to be able to make calls, set the  feature to 
‘ON’. Calls are restricted when you make calls using the handset or [Hook].
Enabling Restriction of Your Machine
Follow this procedure to enable restriction of your machine.
1Press [Menu].
2Press [  (-)] or [  (+)] to select   ➞ press [OK].
3Press [  (-)] or [  (+)] to select   ➞ press [OK].
4Press [  (-)] or [  (+)] to select   ➞ press...

Restricting Use of the Machine9-5
Special Features
9
Canceling Restriction of Your Machine
Follow this procedure to cancel restriction of your machine.
1Follow steps 1 to 4 of “Enabling Restriction of Your Machine,” on p. 9-4.
2Press [  (-)] or [  (+)] to select ‘OFF’ ➞ press [OK].
NOTE
The display contents differ depending on the country.
3Press [Stop/Reset] to return to standby mode.
Restriction of the machine is now disabled. Anyone can make calls.
LOCK PHONE
OFF➞SYSTEM SETTINGS
 3.COUNTRY SELECT
 

CHAPTER
Guidelines for Entering Information3-1
3
Registering Information in the 
Machine
This chapter describes how to enter information in your machine.
Guidelines for Entering Information
The following section explains how to ent er user information into the machine.
NOTE
If you pause while entering information and do not make an entry for more than 60 seconds, the machine returns 
to standby mode and loses all information you had entered up to that point. You will then have to start again.
Entering...

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)10-2
Making Copies
10
Specifying the Paper Size and Type 
(Common for Cassette and Multi-Purpose 
Feeder)
NOTE
•When making copies on A4-size paper after having continuously copied on paper smaller than A4-size paper, the 
copies may be dirty. To prevent copies from being dirty, wait about 1 minute before making copies.
•The paper in the multi-purpose feeder is fed prior to the paper in the cassette.•The settings changed in...

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)10-3
Making Copies
10
●When  is selected:
❑ Press [  (-)] or [  (+)] to select  or   ➞ press [OK].
❑ Use the numeric buttons, or press [  (-)] or [  (+)] to specify vertical and horizontal sizes of the paper in 
millimeters (mm).
Available setting range in : 127 mm to 356 mm
Available setting range in : 76 mm to 216 mm
❑ Press [OK].
Repeat the steps above to specify both vertical and horizontal sizes of the paper.
6Press...

Setting Enlarging/Reducing10-4
Making Copies
10
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2Press [Enlarge/Reduce].
3Press [  (-)] or [  (+)] to select the copy ratio  ➞ press [OK].
You can select from the following: - 200% MAX.
- 141% A5  ➞ A4
- 100%
-70% A4  ➞ A5
-50% MIN.
NOTE
•If the  setting of...

Setting Enlarging/Reducing10-5
Making Copies
10
Enlarging/Reducing Using Custom Copy Ratios
1Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2Press [Enlarge/Reduce] twice.
3Use the numeric buttons to enter the copy ratio ➞ press [OK].
• You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
• Even after entering the copy ratio, you can use [  (-)] or [  (+)] to adjust the copy ratio. To increase the copy 
ratio, press [  (+)]. To decrease the copy...

Improving Copied Image10-6
Making Copies
10
Improving Copied Image
Adjusting the Image Quality (Resolution)
You can adjust image quality to the appropriate level best suited for a document with text or photos.
3 modes are available fo r adjusting the image quality.
1Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2Press [Image Quality] repeatedly until the image quality you want appears.
You can select from the following:
-  for text-only documents
-  for documents with...

Improving Copied Image10-7
Making Copies
10
2Press [Exposure] to select the auto mode ➞ press [OK].
The copy exposure is adjusted automatically.
NOTE
Image quality mode automatically changes to  when  is set. 
Adjusting Manually
1Press [Copy].
If you are already in the Copy standby mode, you can skip this step.
2Press [Exposure] twice to select the manual mode.
3Press [  (-)] or [  (+)] to adjust the copy exposure  ➞ press [OK].
For a lighter copy exposure, press [  (-)]. 
For a darker copy exposure,...

Special Features10-8
Making Copies
10
Special Features
The machine can perform the Collate Copy and Reserve Copy.
Collate Copy
The collate copy allows you to sort copies in page order. It is convenient when you make multiple 
copies of multiple page documents. To use this feature, you need to set  to ‘ON’ in the 
 menu. (See p. 15-5.)
Follow the procedure below to set the Collate Copy function to ‘ON’:
1Press [Menu].
2Press [  (-)] or [  (+)] to select   ➞ press [OK].
3Press [  (-)] or [  (+)] to select...