Canon Eos Rebel T4i 650d Instruction Manual

							341
Trademarks Adobe is a trademark of  Adobe Systems Incorporated.
  Windows is a trademark or registered tr ademark of Microsoft Corporation in the 
United States and other countries.
  Macintosh and Mac OS are trademarks or  registered trademarks of Apple Inc. 
in the United States and other countries.
  SDXC logo is a trademark of SD-3C, LLC.
  HDMI, HDMI logo, and High-Definition Mult imedia Interface are trademarks or 
registered trademarks of HDMI Licensing LLC.
  All other corporate  and product names and trad emarks mentioned in this 
manual are the property of  their respective owners.
About MPEG-4 Licensing“This product is licensed under AT&T patents for the MPEG-4 standard and may be 
used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video 
that was encoded only (1) for a personal  and non-commercial purpose or (2) by a 
video provider licensed under the AT&T pat ents to provide MPEG-4 compliant video. 
No license is granted or implied for any other use for MPEG-4 standard.”
* Notice displayed in English as required.
COPY  
						

							342
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performance when used with 
genuine Canon accessories.  Canon shall not be liable for any damage to this 
product and/or accidents such as fire,  etc., caused by the malfunction of non-
genuine Canon accessories (e.g., a leak age and/or explosion of a battery 
pack). Please note that this warranty does not apply to repairs arising out of the 
malfunction of non-genuine  Canon accessories, although you may request 
such repairs on a chargeable basis.
COPY  
						

							343
Safety Warnings
Follow these safeguards and use the eq uipment properly to prevent injury, death, 
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemic al leakage, and explosions, follow the 
safeguards below:
- Do not use any batteries, power sources,  and accessories not specified in this 
booklet. Do not use any home -made or modified batteries.
- Do not short-circuit, disassemble, or modi fy the battery pack or back-up battery. Do 
not apply heat or apply solder to the battery pack or back-up battery. Do not expose 
the battery pack or back-up battery to fire  or water. And do not subject the battery 
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not 
mix new and old or different types of batteries.
- Do not recharge the battery pack outside  the allowable ambient temperature range 
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the rech\
arging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,  accessories, connecting cables, etc.
• Keep the back-up battery away from children.  If a child swallows the battery, consult a 
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts 
with tape to prevent contact with other metallic objects or batteries. This is to prevent 
fire or an explosion.
• If excessive heat, smoke, or fumes are  emitted during battery pack recharging, 
immediately unplug the battery charger from the power outlet to stop the recharging 
and prevent a fire.
• If the battery pack or back-up battery leaks,  changes color, deforms, or emits smoke or 
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can  cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or 
clothing, flush the affected area with lots of clean water without rubbing it. See a 
physician immediately.
• During the recharging, keep the equipment away  from the reach of children. The cord 
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the  insulation and cause a fire or electrical shock.
• Do not fire the flash at someone dr iving a car. It may cause an accident.• Do not fire the flash near a person’s ey es. It may impair the person’s vision. When 
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and  disconnect the power plug. This is to prevent electrical shock, heat generation, and 
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an 
explosion or fire.
COPY  
						

							344
• If you drop the equipment and the casing breaks open to expose the internal parts, do 
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause  electrical shock.
• Do not look at the sun or an extremely bright  light source through the camera or lens. 
Doing so may damage your vision.
• Keep the camera from the reach of small  children. The neck strap can accidentally 
choke the child.
• Do not store the equipment in dusty or hum id places. This is to prevent fire and 
electrical shock.
• Before using the camera inside an airplane  or hospital, check if it is allowed. 
Electromagnetic waves emitted by the  camera may interfere with the plane’s 
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below: - Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and  pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the  cord or put a heavy object on the cord. 
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use  a dry cloth to clean off the dust around 
the power outlet. If the surrounding is dusty,  humid, or oily, the dust on the power outlet 
may become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage• Do not leave equipment inside a car under  the hot sun or near a heat source. The 
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause  injury. Also make sure the tripod is stur dy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap 
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging  apparatus with a cloth. Doing so may trap 
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if wate r or metal fragments enter inside the camera, 
promptly remove the battery pack and back- up battery. This is to prevent fire and 
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so 
may cause battery leakage or a shorter battery life. The battery pack or back-up 
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or ot her organic solvents to clean the equipment. 
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact 
your dealer or your nearest Canon Service Center. 
COPY  
						

							345
Digital Camera Model DS126371 SystemsThis device complies with Part 15 of the FCC Rules.  Operation is subject to the 
following two conditions: (1 ) This device may not cause harmful interference, 
and (2) this device mu st accept any interference received, including 
interference that may ca use undesired operation.
Note: This equipment has been  tested and found to comply with the limits for 
class B digital devices, pursuant to  Part 15 of the FCC Rules. These 
limits are designed to provide reas onable protection against harmful 
interference in a residential installa tion. This equipment generates, uses 
and can radiate radio frequency energy  and, if not installed and used in 
accordance with the in structions, may cause h armful interference to 
radio communications. However, there  is no guarantee that interference 
will not occur in a particular insta llation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment  off and on, the user is encouraged 
to try to correct the interference  by one or more of the following 
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation betw een the equipment and receiver.
— Connect the equi pment into an outlet on  a circuit different from 
     that to which th e receiver is connected.
— 
Consult the dealer or an experienced radio/TV technician for help.The cable with the ferrite core provided with the digi tal camera must be used 
with this equipment in order to comply with Class B limits in Subpart B of Part 
15 of the FCC rules.
Do not make any changes or modificati ons to the equipment unless otherwise 
specified in the manual. If  such changes or modificati ons should be made, you 
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This Class B digital apparatus co mplies with Canadian ICES-003.
When connecting to and using a ho usehold power outlet, use only AC 
Adapter Kit ACK-E8 (rated input: 10 0-240 V AC 50/60 Hz, rated output: 
7.4 V DC). Using anything else  can cause fire, overheating, or 
electrical shock.
COPY  
						

							346
IMPORTANT SAFETY INSTRUCTIONS
1.SAVE THESE INSTRUCTIONS  — This manual contains important safety 
and operating instructions for Battery Charger LC-E8 & LC-E8E.
2. Before using the charger, read all instructions and cautionary remarks on 
(1) the charger, (2) the ba ttery pack, and (3) the pro duct using the battery 
pack.
3. CAUTION  — To reduce risk of injury, charge only the Battery Pack LP-E8. 
Other types of batteries  may burst, causing personal injury and other 
damage.
4. Do not expose the ch arger to rain or snow.
5. Use of an attachment not recommended  or sold by Canon may result in 
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric  plug and cord, pull by plug rather than 
by cord when disconnecting charger.
7. Make sure cord is located so that it  will not be stepped on, tripped over, or 
otherwise subjected to damage or stress.
8. Do not operate the charger with da maged cord or plug - replace them 
immediately.
9. Do not operate the charger if it ha s received a sharp blow, been dropped, 
or otherwise damaged in  any way; take it to a qualified serviceman.
10. Do not disassemble the charger; take it to a qualified serviceman when 
service or repair is required. Incorrec t reassembly may result in a risk of 
electric shock or fire.
11. To reduce risk of electric shock,  unplug charger from outlet before 
attempting any maintenance or cleaning.
MAINTENANCE INSTRUCTION
Unless otherwise stated in this manu al, there are no user serviceable parts 
inside. Refer servicing to qualified serviceman.
USA and Canada only:
The Lithium ion/polymer battery  that powers the product is 
recyclable. Please call 1-800-8-BATTERY  for information on 
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may 
apply. See www.dtsc.ca.gov/hazardo uswaste/perchlorate/ for details.
CAUTIONRISK OF EXPLOSION IF BATTERY IS  REPLACED BY AN INCORRECT TYPE. 
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
COPY  
						

							347
Downloading Images to aPersonal Computer
This chapter explains how to download images from the 
camera to your personal computer, gives an overview of 
the software in the EOS D IGITAL Solution Disk (CD-
ROM) provided with the came ra, and explains how to 
install the software on your  personal computer. It also 
explains how to view the  PDF files on the Software 
Instruction Manual CD-ROM.
EOS DIGITAL Solution Disk(Software)Software Inst ruction Manual
COPY  
						

							348
You can use the provided software to download the images in the 
camera to your personal computer. There are two ways to do this.
1Install the software (p.351).
2Use the provided interface cable 
to connect the camera to your 
personal computer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the front of 
the camera.
  Connect the cord’s plug to the 
personal computer’s USB terminal.
3Use EOS Utility to download the 
images/movies.
 For details, refer to the Software 
Instruction Manual on the CD-ROM 
(p.352).
Downloading Images to a Personal Computer
Download by Connecting the Camera to the Personal Computer
COPY  
						

							349
Downloading Images to a Personal Computer
If you have a commercially-available card reader, you can use it to 
download images to your personal computer.
1Install the software (p.351).
2Insert the card into the card 
reader.
3Use Canon software to download 
the images/movies.
X Use Digital Photo Professional.
X Use ImageBrowser EX.
  For details, refer to the Software 
Instruction Manual on the CD-ROM 
(p.352).
.
Downloading Images with a Card Reader
When downloading images from the came ra to your personal computer, if 
you do not use Canon software and in stead use a card reader, copy the 
DCIM folder on the card to  your personal computer.
COPY  
						

							350EOS DIGITAL Solution Disk
This disk contains various software for EOS DIGITAL 
cameras.
With the camera connected to a personal computer, EOS Utility enables 
you to transfer still photos and movies  shot with the camera to the 
computer. You can also use this soft ware to set various camera settings 
and shoot remotely with the computer  connected to the camera. Also, 
you can copy background music tra cks, such as EOS Sample Music*, 
to the card.
* Five original background  music tracks are provided by Canon. Use EOS Utility 
to copy the background music tracks  to the card, and you can play the 
background music during playback of vi deo snapshot albums, movies, and slide 
shows with the camera.
This software is recommended for  users who mainly shoot RAW images. 
You can view, edit, process, and prin t RAW images at high speed. You 
can also edit JPEG im ages while retaining the original images.
This software is recommended for users who mainly shoot JPEG images. 
You can easily view and play photos , movies, and video snapshot albums 
and also print JPEG images. Add-on features such as EOS Video 
Snapshot Task (p.190) can also  be downloaded from the Internet.
You can edit Picture Styles and create  and save original Picture Style 
files. This software is aimed at  advanced users who are experienced in 
processing images.
About the Software
EOS Utility
Digital Photo Professional
ImageBrowser EX
Picture Style Editor
Note that the software  ZoomBrowser EX/ImageBrowser  provided with previous 
cameras does not support stil l photos and movie files shot with this camera (it is 
not compatible). Use ImageBrowser  EX provided with this camera.
COPY