Home > Canon > Digital Camera > Canon Eos Rebel T4i 650d Instruction Manual

Canon Eos Rebel T4i 650d Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Eos Rebel T4i 650d Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							281
    wPrinting
    5Set the date and file number 
    imprinting.
     Set them if necessary.
      Select , then press .
      Set as desired, then press < 0>.
    6Set the number of copies.
      Set it if necessary.
      Select , then press < 0>.
      Set the number of copies, then press 
    .
    7Start printing.
      Select [Print ], then press < 0>.
      With Easy printing, you  can print another image us ing the same settings. 
    Just select the image and press the  button. With Ea sy printing, the 
    number of copies will  always be 1. (You cann ot set the number of 
    copies.) Also, any trimming  (p.283) will not be applied.
      The [ Default ] setting for printing effect s and other options are the 
    printer’s own default settings as set  by the printer’s manufacturer. Refer 
    to the printer’s instruction ma nual to find out what the [Default] settings 
    are.
      Depending on the im age’s file size and image-recording  quality, it may 
    take some time for the printing  to start after you select [Print].
      If image tilt correction (p.283) is appl ied, it may take longer to print the 
    image.
      To stop the printing, press <
    0> while [Stop ] is displayed, then select 
    [ OK ].
      If you execute [ Clear all camera settings ] (p.210), all the settings will 
    revert to their defaults.
    COPY  
    						
    							wPrinting
    282
    In step 4 on page 280, select the printing 
    effect. When the < e> icon is displayed 
    brightly next to < z>, you can press 
    the < B> button. You can then adjust 
    the printing effect. What can be adjusted 
    or what is displayed will depend on the 
    selection made in step 4.
      Brightness
    The image brightness can be adjusted.
      Adjust levels
    When you select [ Manual], you can change 
    the histogram’s distribution and adjust the 
    image’s brightness and contrast.
    With the Adjust levels screen displayed, press 
    the < B> button to change the position of 
    the <
    h>. Press the < U> key to freely adjust 
    the shadow level (0-127) or highlight level (128-255).
      kBrightener
    Effective in backlit conditions that can make the subject’s face look 
    dark. When [ On] is set, the face will be  brightened for printing.
      Red-eye corr.
    Effective in flash images where t he subject has red eye. When [On] 
    is set, the red eye will be corrected for printing.
    e  Adjustment of Printing Effects
      The [kBrightener ] and [Red-eye corr. ] effects will not be reflected on 
    the screen.
     
    When you select [Detail set.], you can adjust the [Contrast], [Saturation], 
    [Color tone], and [Color balance]. To adjust the [Color balance], use the 
     keys. B is for blue, A for amber,  M for magenta, and G for green. 
    The image’s color balance will be  corrected towards the selected color.
     If you select [ Clear all], all the printing effect se ttings will be reverted to 
    their defaults.
    COPY  
    						
    							283
    wPrinting
    You can crop the image and print only 
    the trimmed portion as if the image was 
    recomposed.
    Set the trimming right before printing. 
    If you set the trimming and then set the 
    print settings, you may have to set the 
    trimming again before printing.
    1 On the print settings screen, select [Trimming].
    2 Set the trimming frame size, position, and aspect ratio.
     The image area within the tri mming frame will be printed. The 
    trimming frame’s aspect ratio can be changed with [ Paper settings ].
    Changing the trimming frame size When you press the < u> or < Hy> button, the size of the 
    trimming frame will change. The sm aller the trimming frame, the 
    larger the image magnification will be for printing.
    Moving the trimming frame
    Press the  key to move the frame over the image vertically or 
    horizontally. Move the trimming frame until it covers the desired image area.
    Rotating the frame
    Pressing the < B> button will toggle the trimming frame 
    between the vertical a nd horizontal orientations. This enables you 
    to create a vertically oriented  print from a horizontal image.
    Image tilt correction By turning the < 6> dial, you can adjust  the image tilt angle up to 
    ±10 degrees in 0.5-degree increm ents. When you adjust the 
    image tilt, the < O> icon on the screen will turn blue.
    3 Press  to exit the trimming.
    X The print settings screen will reappear.
      You can check the trimmed image area on the upper left of the 
    print settings screen.
    Trimming the Image
    Tilt correction
    COPY  
    						
    							wPrinting
    284
     Depending on the printer,  the trimmed image area may not be printed as 
    you specified.
      The smaller you make the trimming fr ame, the grainier the picture will 
    look in the print.
      While trimming the image, look at th e camera’s LCD monitor. If you look 
    at the image on a TV sc reen, the trimming frame may not be displayed 
    accurately.
    Handling Printer ErrorsIf you resolve a printer  error (no ink, no paper, etc.) and select [ Continue] to 
    resume printing but it do es not resume, operate the  buttons on the printer to 
    resume printing. For details on resumi ng the printing, refer to the printer’s 
    instruction manual.
    Error MessagesIf a problem occurs during printing, an error me ssage will appear on the 
    camera’s LCD monitor. Press  to stop printing . After fixing the 
    problem, resume prin ting. For details on how to  fix a printing problem, refer 
    to the printer’s instruction manual.
    Paper Error Check whether the paper is pr operly loaded in the printer.
    Ink Error Check the printer’s ink level,  and check the waste ink tank.
    Hardware Error Check for any printer problems ot her than paper and ink problems.
    File Error The selected image  cannot be printed via PictBr idge. Images taken with a 
    different camera or imag es edited with a computer may not be printable.
    COPY  
    						
    							285
    You can set the print type, date imprinting, and file number imprinting. 
    The print settings will be applied to all print-ordered images. (They 
    cannot be set individually for each image.)
    1Select [Print order].
      Under the [ x1] tab, select [ Print 
    order], then press < 0>.
    2Select [Set up].
      Select [Set up ], then press .
    3Set the option as desired.
      Set the [Print type ], [Date ], and [ File 
    No. ].
      Select the option to be set, then press 
    . Select the desired setting, 
    then press < 0>.
    W Digital Print Order Format (DPOF)
    Setting the Printing Options
    [Print type][Date][File No.]
    COPY  
    						
    							W Digital Print Order Format (DPOF)
    286
    4Exit the setting.
     Press the < 7> button.
    X The print order screen will reappear.
      Next, select [Sel.Image], [ Byn ], or 
    [All image] to order the images to be 
    printed.
    Print type
    KStandard Prints one  image on one sheet.
    LIndexMultiple thumbnail images are printed on one sheet.
    K
    LBothPrints both the standard and index prints.
    Date On
    [On ] imprints the recorde d date on the print.
    Off
    File numberOn[On ] imprints the file number on the print.
    Off
      Even if [ Date] and [ File No. ] are set to [ On], the date or file number may 
    not be imprinted depending on the pr int type setting and printer model.
      With [ Index ] prints, the [ Date] and [ File No. ] cannot both be set to [ On] 
    at the same time.
      When printing with DP OF, you must use the ca rd whose print order 
    specifications have been set. It will  not work if you just extract images 
    from the card and try to print them.
      Certain DPOF-compatible printers and  photofinishers may not be able to 
    print the images as you  specified. Refer to the printer’s instruction 
    manual before printing. Or chec k with your photofinisher about 
    compatibility when ordering prints.
      Do not insert into the camera a ca rd whose print order was set by a 
    different camera and then try to spec ify a print order. The print order may 
    be overwritten. Also, depending on the image type, th e print order may 
    not be possible.
    RAW images and movies  cannot be print ordered. You can print RAW 
    images through dire ct printing (p.288).
    COPY  
    						
    							287
    W Digital Print Order Format (DPOF)
     Sel.Image
    Select and order images one by one.
    To display the three-image display, press 
    the  button. To return to the 
    single-image display, press the < u> 
    button.
    Press the < M> button to save the 
    print order to the card.
    [Standard] [Both]
    Press the < V> key to set the number of 
    copies to be printed for the displayed 
    image.
    [Index]
    Press < 0> to add a checkmark to the 
    box < X>. The image will be included in 
    the index print.
      Byn
    Select [Mark all in folder ] and select the folder. A print order for one 
    copy of all the images in the fol der will be placed. If you select [ Clear 
    all in folder ] and select the folder, the print order for that folder will 
    all be canceled.
      All image
    If you select [ Mark all on card ], one copy of all the images on the 
    card will be set for printing. If you select [ Clear all on card], the print 
    order will be cleared for a ll the images on the card.
    Print Ordering
    Quantity
    Total images selected
    Index icon
    Checkmark
     
    Note that RAW images and movies will  not be included in the print order 
    even if you set “By n” or “All image”.
      When using a PictBridge  printer, print no more than 400 images for one 
    print order. If you specify more than  this, all the images may not be 
    printed.
    COPY  
    						
    							288
    With a PictBridge printer, you can easily 
    print images with DPOF.
    1Prepare to print.
     See page 276. Follow the “Connecting  the Camera to a Printer” 
    procedure up to step 5.
    2Under the [ x1] tab, select [Print order].
    3Select [Print].
      [Print] will be displayed only if the camera is connected to a 
    printer and printing is possible.
    4Set the [Paper settings] (p.278).
     Set the printing effects (p.280) if necessary.
    5Select [OK].
    W Direct Printing with DPOF
      Before printing, be sure  to set the paper size.
      Certain printers cannot im print the file number.
      If [Bordered ] is set, certain printers may  imprint the date on the border.
      Depending on the printer,  the date may appear faint  if it is imprinted on a 
    bright background  or on the border.
     Under [ Adjust levels ], [Manual ] cannot be selected.
      If you stopped the printing and want to resume  printing the remaining 
    images, select [Resume ]. Note that printing will not resume if you stop 
    the printing and any of the following occurs:
    • Before resuming the printing, you  changed the print order or deleted 
    print-ordered images.
    • When you set the index, you ch anged the paper setting before 
    resuming the printing.
    • When you paused the printing, the  card’s remaining capacity was low.
      If a problem occurs during  printing, see page 284.
    COPY  
    						
    							289
    When you select images to use in photobooks (up to 998 images) and 
    use EOS Utility (provided software) to transfer them to a computer, the 
    selected images will be copied into a  dedicated folder. This function is 
    useful for ordering photobooks online and for printing photobooks on a 
    printer.
    1Select [Photobook Set-up].
      Under the [ x1] tab, select 
    [Photobook Set-up ], then press 
    < 0 >.
    2Select [Select images].
      Select [Select images ], then press 
    < 0 >.
    X The images will be displayed.
      To display the three-image display, 
    press the < Hy> button. To return to 
    the single-image display, press the 
    < u > button.
    3Select the image to be specified.
      Press the < U> key to select the 
    image to be specified, then press 
    < 0 >.
      Repeat this step to select other 
    images. The number of images which 
    have been specified will be displayed 
    on the screen’s upper left.
      To cancel the specified image, press 
     again.
      To return to the menu, press the 
     button.
    p Specifying Images for a Photobook
    Specify One Image at a Time
    COPY  
    						
    							p Specifying Images for a Photobook
    290
    You can specify all the images in  a folder or card at one time.
    When [x 1: Photobook Set-up ] is set 
    to [ All images in folder ] or [All images 
    on card ], all the images in the folder or 
    on the card will be specified.
    To cancel the image specification, select 
    [Clear all in folder ] or [Clear all on 
    card].
    Specifying All Images in a Folder or on a Card
      RAW images and movies  cannot be specified.
      After downloading the specified images to your p ersonal computer, also 
    refer to EOS Utility’s Instruction  Manual (CD-ROM, p.352) and your 
    printer’s instruction manual.
    Do not specify images already specifie d for a photobook in another camera 
    for another photobook with this ca mera. The photobook settings may be 
    overwritten.
    COPY  
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Eos Rebel T4i 650d Instruction Manual