Canon Eos Rebel T4i 650d Instruction Manual

							251
k Playing Movies
Movie Playback Panel
* When background music is set, the movie’s sound will not be played.
Ta p  [7] at the center of the screen.
XThe movie will start playing.
  To display the movie playback panel, 
tap < s1 > on the upper left of the 
screen.
  To pause the movie while it is playing, 
tap the screen. The movie playback 
panel will also appear.
OperationPlayback Description
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion  speed by pressing the  key. The 
slow-motion speed is indicated  at the upper right of the screen.
5 First frameDisplays the movie’s first frame.
3 Previous 
frameEach time you press < 0>, the previous frame is displayed. 
If you hold down , it will rewind the movie.
6 Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast  forward the movie.
4 Last frameDisplays the movie’s last frame.
 Background 
music*Play back a movie with the selected background music 
(p.257).
X  EditDisplays the editing screen (p.252).
Play back position
mm’ ss”Playback time (minutes:seconds)
9 Vo l u m eYou can adjust the built-in sp eaker’s (p.250) volume by 
turning the < 6> dial.
3 2Pressing the  button returns to the single-image display.
Playback with the Touch Screen
 With a fully-charged Batt ery Pack LP-E8, the cont inuous playback time 
at 23°C/73°F will be as fo llows: approx. 2 hr. 30 min.
  If you took a still photo while you sh ot the movie, the still photo will be 
displayed for approx. 1 sec.  during the movie playback.
COPY  
						

							252
You can edit out the first and last scenes of a movie (except video 
snapshots) in 1-sec. increments.
1On the movie playback screen, 
select [X].
X The editing screen will be displayed.
2Specify the part to be edited out.
  Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
  Press the < U> key to see the 
previous or next frames. Holding it 
down will fast forward the frames.
  After deciding which part to edit out, 
press < 0>. The portion highlighted 
in blue on the top of the screen is 
what will remain.
3Check the edited movie.
  Select [7 ] and press < 0> to play 
back the portion highlighted in blue.
  To change the editing, go back to step 
2.
  To cancel the editing, press the 
 button, select [ OK] on the 
confirmation screen, then press 
< 0 >.
X Editing a Movie’s First and Last Scenes
COPY  
						

							253
X Editing a Movie’s First and Last Scenes
4Save the edited movie.
  Select [W ], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ]. Then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is perform ed in 1-sec. increments (position indicated by 
[ X ]), the exact position where the movie  is edited may differ slightly from 
the position you specified.
  If the card does not have  enough free space, [New file] will not be 
available.
  When the battery level is  low, editing the movie is not possible. Use a 
fully-charged battery.
COPY  
						

							254
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [ x2] tab, select [ Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < V> key to select the 
desired option, then press < 0>.
[All images/Movies/Stills]
  Press the < V> key to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Date/Folder/Rating]
  Press the < V> key to select one of 
the following: [ iDate/nFolder/
9 Rating].
  When < zH> is highlighted, 
press the < B> button.
  Press the < V> key to select the 
desired option, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
[Date ][ Folder][ Rating]
COPY  
						

							255
3 Slide Show (Auto Playback)
3Set [Set up] as desired.
 Press the < V> key to select [ Set 
up], then press < 0>.
  Set the [Display time], [ Repeat], 
[Transition effect], and 
[Background music ] for the still 
photos.
  The background music selection 
procedure is explained on page 257.
  After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies on  the card will be played back.
iDateStill photos and movies taken on  the selected shooting date will 
be played back.
nFolder Still photos and movi
es in the selected folder will be played 
back.
k MoviesOnly the movies  on the card will be played back.
zStillsOnly the still photos on the  card will be played back.
9 Rating Only the still photos and movies wi
th the selected rating will be 
played back.
[Display time] [Repeat]
COPY  
						

							256
3 Slide Show (Auto Playback)
4Start the slide show.
 Press the < V> key to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
  To quit the slide show and return to 
the setting screen, press the < M> 
button.
[Transition effect ][Background music ]
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left  of the image. Press  again to resume 
the slide show. You can also pause th e slide show by tapping the screen.
  During auto playback , you can press the  button to change the 
still photo display format (p.82).
  During movie playback, you can adjust  the sound volume by turning the 
 dial.
  During auto playback or  pause, you can press the < U> key to view 
another image.
  During auto playback, auto  power off will not work.
  The display time may vary depending on the image.
  To view the slide show on  a TV set, see page 258.
COPY  
						

							257
3 Slide Show (Auto Playback)
1Select [Background music].
 Set [ Background music ] to [On], 
then press < 0>.
2Select the background music.
  Press the < V> key to select the 
desired background music, then 
press < 0>. You can also select 
multiple background music tracks.
3Play the background music.
  To listen to a sample of the 
background music, press the < B> 
button.
  Press the < V> key to play another 
background music track. To stop 
listening to the background music, 
press the < B> button again.
  Adjust the sound volume by turning 
the < 6> dial.
  To delete a background music track, 
press the < V> key and select the 
track, then press the < L> button.
Selecting the Background Music
At the time of purchase , you cannot select background music with the 
camera. You must first use EOS Utilit y (provided software) to copy the 
background music to the card. For detail s, refer to the EOS Utility Instruction 
Manual on the CD-ROM.
COPY  
						

							258
You can view the still photos and movies on a TV set.
HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 With the plug’s < dHDMI MINI > logo 
facing the front of the camera, insert it 
into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
 Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
Viewing the Images on TV
Viewing on High-Definition (HD) TV Sets
 Adjust the movie’s sound volume wi th the TV set. The sound volume 
cannot be adjusted with the camera.
  Before connecting or disconnectin g the cable between the camera and 
television, turn off th e camera and TV set.
  Depending on the TV se t, part of the image displayed may be cut off.
COPY  
						

							259
Viewing the Images on TV
5Press the  button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  The images will automatically be 
displayed at the TV’s optimum 
resolution.
  By pressing the < B> button, you 
can change the display format.
  To play back movies, see page 250.
If the TV set connected to the camera  with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI device s to control each other so that you can control them with one remote control unit.
1Set [Ctrl over HDMI] to [Enable].
 Under the [ x2] tab, select [ Ctrl over 
HDMI ], then press < 0>.
  Select [Enable ], then press .
Using HDMI CEC TV Sets
The images cannot be output at  the same time from both the  
and < q                > terminals.
 Do not connect any ot her device’s output to the camera’s  
terminal. Doing so ma y cause a malfunction.
  Certain TVs may not be able to play  back the captured images. In such a 
case, use the stereo AV cable AV C-DC400ST (sold separately) to 
connect to the TV.
COPY  
						

							260
Viewing the Images on TV
2Connect the camera to a TV set.
 Use an HDMI cable to connect the 
camera to the TV.
X The TV’s input will switch 
automatically to the HDMI port 
connected to the camera.
3Press the camera’s < x> button.
XAn image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image.
  Point the remote control toward the 
TV set and press the /  button to 
select an image.
5Press the remote control’s Enter button.
X The menu appears and you can 
perform the playback operations 
shown on the left.
 
Press the / button to select the 
desired option, then press the Enter 
button. For a slide show, press the 
remote control’s 
/ button to select 
an option, then pres s the Enter button.
 If you select [ Return] and press the 
Enter button, the menu will disappear 
and you can use the /  button to 
select an image.
Still photo playback menu
Movie playback menu
  Some TV sets require yo u to first enable the HDMI CEC connection. For 
details, refer to the TV set’s instruction manual.
  Certain TV sets, even those comp atible with HDMI CEC, may not 
operate properly. In su ch a case, disconnect the HDMI cable, set [x2: 
Ctrl over HDMI ] to [Disable ], and use the came ra to control the 
playback operation.
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting info
: Rotate
COPY