Canon Eos M Instruction Manual

271
wPrinting
5Set the date and file number 
imprinting.
Set it if necessary.
 Select <
I>, then press < Q/0 >.
 Set as desired, then press .
6Set the number of copies.
Set it if necessary.
 Select <
R>, then press < Q/0 >.
 Set the number of copies, then press 
.
7Start printing.
Select [ Print], then press < Q/0 >.
The [ Default ] setting for printing effects and other options are the 
printer’s own default settings as set by the printer’s manufacturer. Refer 
to the printer’s instruction...

wPrinting
272
In step 4 on page 270, select the printing 
effect. When the < ze> icon is 
displayed brightly, you can press the 
< B > button. You can then adjust the 
printing effect. What can be adjusted or 
what is displayed will depend on the 
selection made in step 4.
 Brightness
The image brightness can be adjusted.
 Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed, press...

273
wPrinting
You can crop the image and print only 
the trimmed portion as if the image was 
recomposed.
Set the trimming right before printing. 
If you set the trimming and then set the 
print settings, you may have to set the 
trimming again before printing.
1On the print settings screen, select [Trimming].
2Set the trimming frame size,  position, and aspect ratio.
The image area within the trimming frame will be printed. The 
trimming frame’s aspect ratio can be changed with [
Paper settings]....

wPrinting
274
Depending on the printer, the trimmed image area may not be printed as 
you specified.
 The smaller you make the trimming frame, the grainier the picture will 
look in the print.
 While trimming the image, look at the camera’s LCD monitor. If you look 
at the image on a TV screen, the trimming frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no ink, no paper, etc.) and select [Continue] to 
resume printing but it does not resume, operate the...

275
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to all print-ordered images. (They 
cannot be set individually for each image.)
1Select [Print order].
Under the [x 1] tab, select [Print 
order ], then press < Q/0 >.
2Select [Set up].
Select [ Set up], then press < Q/
0 >.
3Set the optio n as desired.
Set the [ Print type ], [Date], and [ File 
No. ].
 Select the option to be set, then press 
. Select the desired 
setting, then press <...

W Digital Print Order Format (DPOF)
276
4 Exit the setting.
 Press the < 7> button.The print order screen will reappear.
 Next, select [ Sel.Image], [By n ], or 
[All image ] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images are printed on one sheet.
K
LBothPrints both the standard and index prints.
DateOn[ On ] imprints the recorded date on the print.Off
File numberOn[On ] imprints the file number on the print.Off
 Even if [ Date]...

277
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
By touching the LCD monitor with two 
fingers spread apart and then pinching the 
fingers, a three-image display will appear. 
You can then select images. To return to the 
single screen, touch the LCD monitor with 
two pinched fingers, then spread the fingers.
Press the  button to save the 
print order to the card.
[Standard] [Both]
Press the < Wj /i >/ button to 
set the number of copies to be printed for 
the...

278
With a PictBridge printer, you can easily 
print images with DPOF.
1Prepare to print.
See page 266. Follow the “Connecting the Camera to a Printer” 
procedure up to step 5.
2Under the [x1] tab, select [Print order].
3Select [Print].
[Print ] will be displayed only if the camera is connected to a 
printer and printing is possible.
4Set the [Paper settings] (p.268).
 Set the printing effects (p.270) if necessary.
5Select [OK].
W  Direct Printing with DPOF
 Before printing, be sure to set the paper...

279
When you select images to use in photobooks (up to 998 images) and use 
EOS Utility (provided software) to transfer them to a computer, the selected 
images will be copied into a dedicated folder. This function is useful for 
ordering photobooks online and for printing photobooks on a printer. 
1Select [Photobook Set-up].
Under the [x 1] tab, select 
[Photobook Set-up ], then press 
< Q /0 >.
2Select [Select images].
Select [ Select images ], then press 
< Q /0 >.
The images will be displayed.
...

p Specifying Images for a Photobook
280
You can specify all the images in a folder or on a card at one time.
When [x1: Photobook Set-up ] is set 
to [All images in folder ] or [All images 
on card ], all the images in the folder or 
card will be specified.
To cancel the image specification, select
[Clear all in folder ] or [Clear all on 
card ].
Specifying All Images in a Fo lder or on a Card
You can specify up to 998 images.
 RAW images and movies cannot be specified.
Do not specify for a photobook...