Canon Eos M Instruction Manual

261
U Creative Filters
4Adjust the filter effect.
 Press the < YA >/< ZO > button to 
adjust the filter effect, then press 
< Q /0 >.
 For the Miniature effect, press the 
/ button and select 
the image area (within the white 
frame) where you want the image to 
look sharp. Then press < Q/0 >.
By pressing the < B> button, you 
can switch the white frame’s 
orientation between vertical and 
horizontal.
5Save the image.
 Select [ OK] to save the image.
 Check the destination folder and 
image file...

262
You can resize an image to make the pixel count lower and save it as a 
new image. Resizing an image is possible only with JPEG 3/4 /a /b  
images.  JPEG c and RAW images cannot be resized.
You can also resize with the  Q Quick Control screen.
1Select [Resize].
 Under the [x 1] tab, select [Resize], 
then press < Q/0 >.
The images will be displayed.
2Select an image.
Select the image you want to resize.
 You can also select an image on the 
index display.
3Select the desired image size.
When you...

263
S Resize
4Save the image.
 Select [ OK] to save the resized 
image.
 Check the destination folder and 
image file number, then select [ OK].
 To resize another image, repeat steps 
2 to 4.
 Press the < M> button to return to 
the menu.
Resize Options According to Original Image Size
Original Image SizeAvailable Resize Settings
4 abc
3 kkkk
4
kkk
a
kk
b
k
c
 

S Resize
264
The image size displayed in step 3 on page 262, such as [ ***M 
****x**** ], has a 3:2 aspect ratio. The image size according to aspect 
ratios is shown in the table below.
The asterisked image-recording quality figures do not exactly match the 
aspect ratio. The image will be cropped slightly.
About Image Sizes
Image 
QualityAspect Ratio and Pixel Count (Approx.)
3:2 4:316:9 1:1
4
3456x2304 
(8.0 megapixels)3072x2304 
(7.0 megapixels)3456x1944 
(6.7 megapixels)2304x2304 
(5.3 megapixels)
a...

265
9
Printing Images
Printing  (p.266)
You can connect the camera directly to a printer and print 
out the images on the card. The camera is compatible with 
“ w PictBridge” which is the standard for direct printing.
 Digital Print Order Format (DPOF)  (p.275)
DPOF (Digital Print Order Format) enables you to print 
images recorded on the card according to your printing 
instructions such as the image selection, quantity to print, 
etc. You can print multiple images in one batch or give the 
print...

266
The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor.
1Set the camera’s power to 
.
2Set up the printer.
For details, see the printer’s 
instruction manual.
3Connect the camera to the 
printer.
Use the interface cable provided with 
the camera.
 Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the front of 
the camera.
 To connect to the printer, refer to the 
printer’s instruction manual.
4Turn on the...

267
Preparing to Print
6Play back the image.
Press the  button.
The image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
 Movies cannot be printed.
 The camera cannot be used with print ers compatible only with CP Direct 
or Bubble Jet Direct.
 Do not use any interface cable other than the one provided.
 If there is a long beeping sound in step 5, it indicates a problem with the 
printer. Resolve the problem...

268
The screen display and setting options will differ depending on the 
printer. Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
Check that the < w> icon is 
displayed on the upper left of the LCD 
monitor.
 Press the < YA >/< ZO > button to 
select the image to be printed.
2Press .
The print setting screen will appear.
3Select [Paper settings].
 Select [ Paper settings ], then press 
< Q /0 >.
The paper settings screen...

269
wPrinting
Select the size of the paper loaded in 
the printer, then press < Q/0 >.
The paper type screen will appear.
 Select the type of the paper loaded in 
the printer, then press < Q/0 >.
The page layout screen will appear.
 Select the page layout, then press 
.
The print settings screen will 
reappear.
*1:From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
*2: After...

wPrinting
270
4Set the printing effects.
Set them if necessary. If you do not 
need to set any printing effects, go to 
step 5.
 What is displayed on the screen 
differs depending on the printer.
 Select the option, then press < Q/
0 >.
 Select the desired printing effect, then 
press < Q/0 >.
 If the < ze> icon is displayed 
brightly, you can also adjust the 
printing effect (p.272).
* When you change the printing effects, changes are reflected in the image 
displayed on the upper left. Note that...