Canon Eos M Instruction Manual

241
You can edit out the first and last scenes of a movie in 1-sec. increments (except for video snapshots).
1On the movie playback screen, 
select [X].
The editing screen will be displayed.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press .
 Tap [ 3]/[6 ] to see the previous or 
next frame. Tap and hold down [ 3]/
[6 ] to fast forward the frames.
 After deciding which part to edit out, 
press < Q/0 >. The portion 
highlighted in gray on the top...

X Editing a Movie’s First and Last Scenes
242
4Save the edited movie.
 Select [ W], then press < Q/0 >.The save screen will appear.
 To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ], then press < Q/0 >.
 On the confirmation dialog, select 
[OK ], then press < Q/0 > to save 
the edited movie and return to the 
movie playback screen.
 When the battery level is low, editing the movie is not possible. Use a 
fully-charged battery.
...

243
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
Under the [x 2] tab, select [Slide 
show ], then press < Q/0 >.
2Select the images to be played 
from one of the following: [ iAll 
images], [ kMovies], [ zStills], 
[i Date], [ nFolder], or 
[9 Rating].
Set the option that appears as [ All 
images
] and is circled in the illustration. There are two ways to do so.
Select the [All images] option with the   
< W j /i >/ button
Press the < Wj /i >/ button to...

3 Slide Show (Auto Playback)
244 [i
Date], [ nFolder], or 
[9 Rating]
Select the date, folder, or rating of the 
images to be played.
 When < zH> is highlighted, 
press the < B> button.
 Select the desired option, then press 
.
3Set [Set up] as desired.
Select [Set up], then press .
 Set the [Display time ], [Repeat ], 
[Transition effect ], and 
[Background music ] for the still 
photos.
 The background music selection 
procedure is explained on page 246.
 After selecting the settings, press the...

245
3 Slide Show (Auto Playback)
4Start the slide show.
Select [ Start], then press < Q/0 >.
After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
 To quit the slide show and return to 
the setting screen, press the < M> 
button.
[ Display time ]
[Repeat ]
[Transition effect][Background music ]
To pause the slide show, press < Q/0 >. During pause, [ G] will be 
displayed on the upper left of the image. Press < Q/0 > again to 
resume the slide show. You can also...

3 Slide Show (Auto Playback)
246
1Select [Background music].
Set [ Background music ] to [On], 
then press < Q/0 >.
2Select the background music.
Press the < Wj /i >/ button 
to select the background music, then 
press < Q/0 >. You can also select 
multiple background music tracks.
3Play the background music.
 To listen to a sample of the 
background music, press the < B> 
button.
 Press the < Wj /i >/ button 
to play another background music 
track. To stop listening to the 
background music, press...

247
You can view the still photos and movies on a TV set.
HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
With the plug’s < dHDMI MINI> side 
facing the front of the camera, insert it 
into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV  and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power to < 1>.
Viewing the Images on TV
Connecting an HDMI Cable...

Viewing the Images on TV
248
5Press the  button.
The image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
 The images will automatically be 
displayed at the TV’s optimum 
resolution.
 By pressing the < B> button, you 
can change the display format.
 To play back movies, see page 239.
When the camera is connected to a TV, the following operations 
cannot be performed:
 During shooting:
• Moving the AF point
• Magnifying/reducing the image
• Switching Movie...

249
Viewing the Images on TV
If the TV set connected to the camera with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
1Set [Ctrl over HDMI] to [Enable].
Under the [ x2] tab, select [ Ctrl over 
HDMI], then press < Q/0 >.
 Select [ Enable], then press < Q/
0 >.
2Connect the camera to a TV set.
Use an HDMI...

Viewing the Images on TV
250
5Press the remote control’s Enter 
button.
The menu appears and you can 
perform the playback operations shown on the left.
 Press the  /  button to select the 
desired option, then press the Enter 
button. For a slide show, press the 
remote control’s  /
 button to select 
an option, then press the Enter 
button.
 If you select [ Return] and press the 
Enter button, the menu will disappear 
and you can use the  / button to 
select an image.
Still photo playback...