Canon Eos M Instruction Manual

							241
You can edit out the first and last scenes of a movie in 1-sec. increments (except for video snapshots).
1On the movie playback screen, 
select [X].
The editing screen will be displayed.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press .
 Tap [ 3]/[6 ] to see the previous or 
next frame. Tap and hold down [ 3]/
[6 ] to fast forward the frames.
 After deciding which part to edit out, 
press < Q/0 >. The portion 
highlighted in gray on the top of the 
screen is what will remain.
3Check the edited movie.
 Select [ 7] and press < Q/0 > to 
play the portion shown in gray.
 To change the editing, go back to step 
2.
 To cancel the editing, press the 
 button, select [ OK] on the 
confirmation dialog, then press < Q/
0 >.
X Editing a Movie’s First and Last Scenes
 
						

							X Editing a Movie’s First and Last Scenes
242
4Save the edited movie.
 Select [ W], then press < Q/0 >.The save screen will appear.
 To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ], then press < Q/0 >.
 On the confirmation dialog, select 
[OK ], then press < Q/0 > to save 
the edited movie and return to the 
movie playback screen.
 When the battery level is low, editing the movie is not possible. Use a 
fully-charged battery.
 Since the editing is performed in 1-sec. increments (position indicated by 
[X ]), the exact position whe re the movie is edited may differ slightly from 
the position you specified.
 If the card does not have enough free space, [ New file] will not be 
available.
 
						

							243
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
Under the [x 2] tab, select [Slide 
show ], then press < Q/0 >.
2Select the images to be played 
from one of the following: [ iAll 
images], [ kMovies], [ zStills], 
[i Date], [ nFolder], or 
[9 Rating].
Set the option that appears as [ All 
images
] and is circled in the illustration. There are two ways to do so.
Select the [All images] option with the   
< W j /i >/ button
Press the < Wj /i >/ button to 
select the [All images ] option and then 
press < Q/0 >.  Press the < Wj /i >/
< X L > button to select the images to be 
played and then press < Q/0 >.
Tap directly the [All images] option
Tap the [All images ] option twice. The 
following six options will then appear and 
you can select any of them: [ All 
images], [ Movies], [Date], [Stills], 
[Folder ], [Rating ]. Tap the images to be 
played and then tap [ sOK]. Back in 
the slide show settings screen, tap 
[3 2].
3 Slide Show (Auto Playback)
Number of images 
to be played
 
						

							3 Slide Show (Auto Playback)
244 [i
Date], [ nFolder], or 
[9 Rating]
Select the date, folder, or rating of the 
images to be played.
 When < zH> is highlighted, 
press the < B> button.
 Select the desired option, then press 
.
3Set [Set up] as desired.
Select [Set up], then press .
 Set the [Display time ], [Repeat ], 
[Transition effect ], and 
[Background music ] for the still 
photos.
 The background music selection 
procedure is explained on page 246.
 After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies on the card will be played back.
i DateStill photos and movies taken on the selected shooting date will 
be played back.
n FolderStill photos and movies in the selected folder will be played back.
kMoviesOnly the movies on the card will be played back.
zStillsOnly the still photos on the card will be played back.
9RatingOnly the still photos and movies with the selected rating will be played back.
[Date ][ Folder][ Rating]
 
						

							245
3 Slide Show (Auto Playback)
4Start the slide show.
Select [ Start], then press < Q/0 >.
After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
 To quit the slide show and return to 
the setting screen, press the < M> 
button.
[ Display time ]
[Repeat ]
[Transition effect][Background music ]
To pause the slide show, press < Q/0 >. During pause, [ G] will be 
displayed on the upper left of the image. Press < Q/0 > again to 
resume the slide show. You can also pause the slide show by tapping the 
screen.
 During the slide show, you can press the < B> button to change the 
still photo display format (p.98).
 During movie playback, you can adjust the sound volume by turning the 
 dial.
 During the slide show or during pause, you can press the < YA >/
< Z O> button to view another image.
 During the slide show, auto power off will not work.
 The display time may vary depending on the image.
 To view the slide show on a TV set, see page 247.
 
						

							3 Slide Show (Auto Playback)
246
1Select [Background music].
Set [ Background music ] to [On], 
then press < Q/0 >.
2Select the background music.
Press the < Wj /i >/ button 
to select the background music, then 
press < Q/0 >. You can also select 
multiple background music tracks.
3Play the background music.
 To listen to a sample of the 
background music, press the < B> 
button.
 Press the < Wj /i >/ button 
to play another background music 
track. To stop listening to the 
background music, press the < B> 
button again.
 Adjust the sound volume by turning 
the < 5> dial.
 To delete background music from the 
card, tap [ Delete].
Selecting the Background Music
At the time of purchase, you cannot select background music with the 
camera. You must first use EOS Utility (provided software) to copy the 
background music to the card. For details, refer to the PDF Software  
Instruction Manual for EOS Utility on the DVD-ROM.
 
						

							247
You can view the still photos and movies on a TV set.
HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
With the plug’s < dHDMI MINI> side 
facing the front of the camera, insert it 
into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV  and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power to < 1>.
Viewing the Images on TV
Connecting an HDMI Cable  and Viewing on a TV
Adjust the movie’s sound volume with the TV set. The sound volume 
cannot be adjusted with the camera.
 Before connecting or disconnecting the cable between the camera and 
television, turn off the camera and TV set.
 Depending on the TV set, part of the image displayed may be cut off.
 
						

							Viewing the Images on TV
248
5Press the  button.
The image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
 The images will automatically be 
displayed at the TV’s optimum 
resolution.
 By pressing the < B> button, you 
can change the display format.
 To play back movies, see page 239.
When the camera is connected to a TV, the following operations 
cannot be performed:
 During shooting:
• Moving the AF point
• Magnifying/reducing the image
• Switching Movie Servo AF ON/OFF during movie shooting
 During movie playback:
• Quick Control
The images cannot be output at the same time from both the < D> 
and < q                 > terminals.
Do not connect any other device’s output to the camera’s < D> 
terminal. Doing so may cause a malfunction.
 Certain TVs may not be able to play back the captured images. In such a 
case, use the AV cable AVC-DC400ST (sold separately) to connect to 
the TV.
 
						

							249
Viewing the Images on TV
If the TV set connected to the camera with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
1Set [Ctrl over HDMI] to [Enable].
Under the [ x2] tab, select [ Ctrl over 
HDMI], then press < Q/0 >.
 Select [ Enable], then press < Q/
0 >.
2Connect the camera to a TV set.
Use an HDMI cable to connect the 
camera to the TV.
The TV’s input will switch 
automatically to the HDMI port 
connected to the camera.
3Press the camera’s < x> button.
An image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image.
 Press the remote control’s  /  
button and select an image.
Using HDMI CEC TV Sets
 
						

							Viewing the Images on TV
250
5Press the remote control’s Enter 
button.
The menu appears and you can 
perform the playback operations shown on the left.
 Press the  /  button to select the 
desired option, then press the Enter 
button. For a slide show, press the 
remote control’s  /
 button to select 
an option, then press the Enter 
button.
 If you select [ Return] and press the 
Enter button, the menu will disappear 
and you can use the  / button to 
select an image.
Still photo playback menu
Movie playback menu
 Some TV sets require you to first enable the HDMI CEC connection. For 
details, refer to the TV set’s instruction manual.
 Certain TV sets, even those compatible with HDMI CEC, may not 
operate properly. In such a case, disconnect the HDMI cable, set [ x2: 
Ctrl over HDMI ] to [Disable ]; then, connect the camera and TV once 
more using the HDMI cable and use the camera to control the playback 
operation.
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting info
: Rotate