Canon 80d Manual

							471
3 Menu Settings
z: Shooting 2 (Red)Page
* During Live View shooting, exposure compensation can be set up to ±3 stops.
z: Shooting 3 (Red) 
Exposure 
compensation/AEB1/3- and 1/2-stop increments, ±5 stops* 
(AEB ±3 stops) 200
201
ISO speed settings
ISO speed / Range for stills / Auto range / 
Minimum shutter speed for auto 148
Auto Lighting 
OptimizerDisable / Low / Standard / High
169
Disabled in M or B modes
White balance Q
 (Ambience priority) /  Qw (White priority) / 
W /E /R /Y /U /D /O /
P  (Approx. 2500 - 10000) 162
Custom White Balance
Manual setting of white balance 164
White balance shift/
bracketingWhite balance correction: B/A/M/G bias, 
9 levels each
167
White balance bracketing: B/A and M/G bias, 
single-level increments, ±3 levels
Color space sRGB / Adobe RGB 181
Picture StyleD
Auto /  PStandard / Q Portrait / 
R Landscape /  uFine Detail / 
S Neutral /  UFaithful /  VMonochrome / 
W User Def. 1-3 154
Long exposure noise 
reduction
Disable / Auto / Enable 172
High ISO speed noise 
reductionDisable / Low / Standard / High / Multi Shot 
Noise Reduction
170
Highlight tone priority
Disable / Enable 174
Dust Delete DataObtain data to be used by Digital Photo 
Professional (EOS software) to delete dust 
spots 405
Multiple exposure
Multiple exposure / Multiple exposure control / 
Number of exposures / Continue multiple 
exposure 212
HDR Mode
Adjust dynamic range / Effect / Continuous 
HDR / Auto Image Align
207 
						

							3 Menu Settings
472
z: Shooting 4* (Red)Page
* In Basic Zone modes, these menu options are displayed under the [z2] tab.
z: Shooting 5* (Red) 
* In Basic Zone modes, these menu options are displayed under the [ z3] tab.
z: Shooting 6 (Red) 
Interval timer Disable / Enable (Interval / Number of shots) 223
Bulb timerDisable / Enable (Exposure time) 205
Anti-flicker shootingDisable / Enable 179
Mirror lockupDisable / Enable 219
Aspect ratio3:2 / 4:3 / 16:9 / 1:1 146
Live View shooting Enable / Disable 257
AF method u
+Tracking / FlexiZone - Multi / 
FlexiZone - Single 276
Touch shutter Disable / Enable 286
Grid display Off / 3x3 l / 6x4  m / 3x3+diag  n 270
Exposure simulation Enable / During e / Disable 271
Silent LV shooting Mode 1 / Mode 2 / Disable 272
Metering timer4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 
10 min. / 30 min.
273 
						

							473
3 Menu Settings
x: Playback 1 (Blue)Page
3: Playback 2 (Blue)
3: Playback 3 (Blue)
Protect imagesProtect images 376
Rotate image Rotate images 358
Erase images Erase images 378
Print order Specify images to be printed (DPOF) 380
Photobook Set-up Specify images for a photobook 384
Creative filters Grainy B/W / Soft focus / Fish-eye effect / 
Art bold effect / Water painting effect / 
Toy camera effect / Miniature effect 
399
RAW image processing
Process 1 images 390
Cropping Partially crop JPEG images 397
Resize Downsize JPEG image’s pixel count 395
Rating [OFF ] / l  / m  / n  / o  / p 359
Slide show Playback description / Display time / Repeat / 
Transition effect / Background music 369
Image jump w/ 61 image / 10 images / 100 images / Date / 
Folder / Movies / Stills / Rating 354
Highlight alert Disable / Enable 351
AF point display Disable / Enable 352
Playback grid Off / 3x3 l / 6x4  m / 3x3+diag  n 347
Histogram display Brightness / RGB 352
Control over HDMI Disable / Enable 374 
						

							3 Menu Settings
474
5: Set-up 1 (Yellow)Page
* For details, refer to the Wireless Function Instruction Manual.
5: Set-up 2 (Yellow)
Select folderCreate and select a folder 182
File number Continuous / Auto reset / Manual reset 184
Auto rotate OnzD  / On D / Off 387
Format card Initialize and erase data on the card 64
Eye-Fi settings Displayed when a commercially-available 
Eye-Fi card is inserted
457
Wireless 
communication 
settings Wi-Fi/NFC: Disable / Enable
Allow NFC connections
-*
Wi-Fi function:
Transfer images between cameras / Connect 
to smartphone / Remote control (EOS Utility) / 
Print from Wi-Fi printer / View images on DLNA 
devices / Upload to Web service
Send images to smartphone
Nickname
Clear Settings
Auto power off 1 min. / 2 min. / 4 min. / 8 min. / 15 min. / 
30 min. / Disable 66
LCD brightness Adjust the brightness (seven levels) 386
LCD off/on button Remains on / Shutter button 67
Date/Time/Zone
Date (year, month, day) / Time (hour, min., sec.) / 
Daylight saving time / Time zone43
Language K Select the interface language 46
Viewfinder display Electronic level: Hide / Show
72
Grid display: Hide / Show 71
Flicker detection: Show / Hide 74
GPS device settings Settings available when the GPS Receiver GP-
E2 (sold separately) is attached - 
						

							475
3 Menu Settings
5: Set-up 3 (Yellow)Page
Video systemNTSC / PAL 307
373
Feature guide Enable / Disable 75
Touch control Standard / Sensitive / Disable 63
Battery information Power / Remaining capacity / Shutter count / 
Recharge performance / Battery registration / 
Serial number / Battery history 452
Sensor cleaning Auto cleaning
f: Enable / Disable
404
Clean now f
Clean manually 407
z  button display 
options Displays camera settings / Electronic level / 
Displays shooting functions
450
z  button LV display 
options Live View info switch setting: 1 / 2 / 3 / 4 262
Histogram display: Brightness / RGB / 
Display size
263
Reset
 When using a wireless function or  GPS device, be sure to check the 
countries and areas of use, and observe the laws and regulations of the 
country or region.
 Note that when connecting GPS Receiver GP-E2
 (sold separately) with a cable, preparations as below are necessary.
- Update the GP-E2’s firmware to Version 2.0.0 or later. (Using the cable  for connection is not possible with the firmware version earlier than 
Version 2.0.0.)
- An interface cable (sold separately, p.469) must be used.
When using the GP-E2 attached to the hot shoe
, preparations as above 
are not necessary. For how to update the GP-E2’s firmware, refer to the 
Canon website.
 Wireless functions cannot be set if the camera is connected to a 
computer, GPS receiver, or another device with an interface cable. 
						

							3 Menu Settings
476
5: Set-up 4 (Yellow)Page
* During firmware updates, the touch screen will be disabled to prevent accidental 
operations.
8: Custom Functions (Orange)
9: My Menu (Green)
Multi function lock
Main Dial
54
Quick Control Dial
Multi-controller
Touch control
Custom shooting mode 
(C1, C2)Register current camera settings to the Mode 
Dial’s 
w and x  positions 445
Clear all camera 
settingsResets the camera to the default settings 68
Copyright informationDisplay copyright information / 
Enter author’s name / 
Enter copyright details / 
Delete copyright information 186
Certification Logo 
Display
Displays some of the logos of the camera’s 
certifications
449
z
firmware ver. * For updating the firmware -
C.Fn I: Exposure
Customize camera functions as desired 413
C.Fn II: Autofocus
416
C.Fn III: Operation/
Others425
Clear all Custom 
Functions (C.Fn)Clear all Custom Function settings 410
Add My Menu tab
Add My Menu tabs 1-5 440
Delete all My Menu tabsDelete all My Menu tabs 443
Delete all itemsDelete all items under My Menu tabs 1-5 443
Menu displayNormal display / Display from My Menu tab / 
Display only My Menu tab
444 
						

							477
3 Menu Settings
z: Shooting 1 (Red)Page
* Still photo shooting is not possible during movie shooting even if [ Image quality] 
menu is displayed during movie shooting.
Movie Shooting
Image quality* 1
 / 41  / 61
142
73  / 83  / 74  / 84  / 7 a  / 8 a  / b  / c
Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold 67
Beep Enable / Touch to n / Disable 66
Release shutter 
without card Enable / Disable
38
Lens aberration 
correctionPeripheral illumination correction: Enable / 
Disable
175
Chromatic aberration correction: Enable / 
Disable
  Shaded menu options are not displayed in Basic Zone modes.
 The menu tabs and options displayed will differ between viewfinder 
shooting/Live View shooting and movie shooting. Note that the menu 
tabs and options displayed in [ x1] Playback 1 to [ x3] Playback 3, 
[ 5 1] Set-up 1 to [ 54] Set-up 4, [ 8] Custom Functions, and [ 9] My 
Menu are the same as those displayed in viewfinder shooting/Live View 
shooting (p.473-476). 
						

							3 Menu Settings
478
z: Shooting 2 (Red)Page
* Settable only for manual exposures.
z: Shooting 3 (Red) 
Exposure 
compensation1/3- and 1/2-stop increments, ±3 stops 200
ISO speed settings
ISO speed* / Range for movies 148
332
Auto Lighting 
OptimizerDisable / Low / Standard / High
169
Disabled in M or B modes
White balance Q
 (Ambience priority) /  Qw (White priority) / 
W /E /R /Y /U /D /O /P  (Approx. 2500 - 
10000) 162
Custom White Balance
Manual setting of white balance 164
White balance 
correctionB/A/M/G bias, 9 levels each 167
Picture StyleD
Auto /  PStandard / Q Portrait / 
R Landscape /  uFine Detail /  SNeutral 
/  U Faithful /  VMonochrome /  WUser 
Def. 1-3 154
High ISO speed noise 
reduction
Disable / Low / Standard / High 170
Highlight tone priority
Disable / Enable 174
Dust Delete DataObtain data to be used by Digital Photo 
Professional (EOS software) to delete dust 
spots 405 
						

							479
3 Menu Settings
z: Shooting 4*1 (Red)Page
*1: In Basic Zone modes, these menu options are displayed under the [z2] tab.
*2: In Basic Zone modes, [ Sound recording] will be set to [On/Off].
Movie Servo AF
Enable / Disable 326
AF method u
+Tracking / FlexiZone - Multi / FlexiZone - 
Single 327
Movie recording quality MOV / MP4 306
Movie recording size (MOV format):
• 1920x1080
• NTSC: 29.97p / 23.98p
PAL: 25.00p
• ALL-I (For editing)
Movie recording size (MP4 format):
• 1920x1080 / 1280x720
• NTSC: 59.94p / 29.97p / 23.98p
PAL: 50.00p / 25.00p
• IPB (Standard) / IPB (Light) 307
Digital zoom Disable / Approx. 3-10x zoom 311
Sound recording
*2
Sound recording: Auto / Manual / Disable 312
Recording level
Wind filter: Auto / Disable
Attenuator: Disable / Enable
Movie Servo AF speed When active: Always on / During shooting
329
AF speed: Slow (-7/-6/-5/-4/-3/-2/-1) / 
Standard / Fast (+1/+2)
Movie Servo AF 
tracking sensitivityLocked on (-3/-2/-1) / 0 / Responsive (+1/+2/+3)330 
						

							3 Menu Settings
480
z: Shooting 5*1 (Red)Page
*1: In Basic Zone modes, these menu options are displayed under the [z3] tab.
Metering timer 4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 
10 min. / 30 min. 331
Grid display Off / 3x3 l / 6x4  m / 3x3+diag  n 331
V  button function a/-/q /-/a /k /q/ k 331
Video snapshot Video snapshot: Enable / Disable
333
Album settings: Create a new album / Add to 
existing album
Show confirm message: Enable/Disable
Time-lapse movie Disable / Enable (Interval / No. of shots / Time 
required / Playback time/ Card- time left) 319
Remote control 
shooting Disable / Enable 332