Canon 70d W User Manual
Have a look at the manual Canon 70d W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 396
396
You can check the battery’s condition on the LCD monitor. Each Battery
Pack LP-E6 has a unique serial number, and you can register multiple
battery packs to the camera. When you use this feature, you can check
the registered battery pack’s remain ing capacity and operation history.
Select [Battery info.].
Under the [ 54] tab, select [ Battery
info. ], then press < 0>.
X The battery info screen will appear.
3 Checking the Battery Information
Battery model or household power source being used....](http://img.usermanuals.tech/thumb/14/63319/w64_canon-70d-w-user-manual-1491463861_d-395.png "Page 396
396
You can check the battery’s condition on the LCD monitor. Each Battery
Pack LP-E6 has a unique serial number, and you can register multiple
battery packs to the camera. When you use this feature, you can check
the registered battery pack’s remain ing capacity and operation history.
Select [Battery info.].
Under the [ 54] tab, select [ Battery
info. ], then press < 0>.
X The battery info screen will appear.
3 Checking the Battery Information
Battery model or household power source being used....")
![Page 397
397
3 Checking the Battery Information
You can register up to six LP-E6 battery packs to the camera. To
register multiple battery packs to the camera, do the procedure below
for each battery pack.
1Press the < B> button.
With the battery info. screen
displayed, press the < B> button.
X The battery history screen will
appear.
X If the battery has not been registered,
it will be grayed out.
2Select [Register].
Select [Register ], then press .
X The confirmation dialog will appear.
3Select [OK]....](http://img.usermanuals.tech/thumb/14/63319/w64_canon-70d-w-user-manual-1491463861_d-396.png "Page 397
397
3 Checking the Battery Information
You can register up to six LP-E6 battery packs to the camera. To
register multiple battery packs to the camera, do the procedure below
for each battery pack.
1Press the < B> button.
With the battery info. screen
displayed, press the < B> button.
X The battery history screen will
appear.
X If the battery has not been registered,
it will be grayed out.
2Select [Register].
Select [Register ], then press .
X The confirmation dialog will appear.
3Select [OK]....")
![Page 399
399
3 Checking the Battery Information
You can check the remaining capaci ty of any battery pack (even when not installed) and also when it was last used.
Look for the serial number.
Refer to the battery’s serial number
label and look for the battery’s serial
number on the battery history screen.
X You can check the respective battery
pack’s remaining capacity and the
date when it was last used.
1Select [Delete info.].
Follow step 2 on page 397 to select [ Delete info.], then press
< 0 >.
2Select...](http://img.usermanuals.tech/thumb/14/63319/w64_canon-70d-w-user-manual-1491463861_d-398.png "Page 399
399
3 Checking the Battery Information
You can check the remaining capaci ty of any battery pack (even when not installed) and also when it was last used.
Look for the serial number.
Refer to the battery’s serial number
label and look for the battery’s serial
number on the battery history screen.
X You can check the respective battery
pack’s remaining capacity and the
date when it was last used.
1Select [Delete info.].
Follow step 2 on page 397 to select [ Delete info.], then press
< 0 >.
2Select...")
![Page 401
401
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a computer or upload them to
an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on\
how to set up and use the Eye-Fi card or to troubleshoot any image
transfer problems, refer to the Eye-Fi card’s instruction manual or
contact the card manufacturer. The camera is not guaranteed to support Eye-Fi card
functions (including wireless...](http://img.usermanuals.tech/thumb/14/63319/w64_canon-70d-w-user-manual-1491463861_d-400.png "Page 401
401
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a computer or upload them to
an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on\
how to set up and use the Eye-Fi card or to troubleshoot any image
transfer problems, refer to the Eye-Fi card’s instruction manual or
contact the card manufacturer. The camera is not guaranteed to support Eye-Fi card
functions (including wireless...")
![Page 402
H Using Eye-Fi Cards
402
4Display the connection
information.
Select [ Connection info. ], then press
< 0 >.
5Check the [Access point SSID:].
Check that an access point is
displayed for [ Access point SSID: ].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the < M> button to exit the
menu.
6Take the picture.
X The picture is transferred and the
icon switches from gray (not
connected) to one of the icons below.
For transferred images, O is
displayed in the...](http://img.usermanuals.tech/thumb/14/63319/w64_canon-70d-w-user-manual-1491463861_d-401.png "Page 402
H Using Eye-Fi Cards
402
4Display the connection
information.
Select [ Connection info. ], then press
< 0 >.
5Check the [Access point SSID:].
Check that an access point is
displayed for [ Access point SSID: ].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the < M> button to exit the
menu.
6Take the picture.
X The picture is transferred and the
icon switches from gray (not
connected) to one of the icons below.
For transferred images, O is
displayed in the...")
![Page 403
403
H Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards
If [53: Wi-Fi ] is set to [ Enable], image transfer with an Eye-Fi card is not
possible.
If “ ” is displayed, an error oc curred while retrieving the card
information. Turn the camera’s power switch off and on again.
Even if [Eye-Fi trans. ] is set to [Disable], it may still transmit a signal. In
hospitals, airports, and other places where wireless transmissions are
prohibited, remove the Eye-Fi card from the camera.
If the image...](http://img.usermanuals.tech/thumb/14/63319/w64_canon-70d-w-user-manual-1491463861_d-402.png "Page 403
403
H Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards
If [53: Wi-Fi ] is set to [ Enable], image transfer with an Eye-Fi card is not
possible.
If “ ” is displayed, an error oc curred while retrieving the card
information. Turn the camera’s power switch off and on again.
Even if [Eye-Fi trans. ] is set to [Disable], it may still transmit a signal. In
hospitals, airports, and other places where wireless transmissions are
prohibited, remove the Eye-Fi card from the camera.
If the image...")
401 With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. For instructions on\ how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer. The camera is not guaranteed to support Eye-Fi card functions (including wireless tr ansfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that approval is requ ired to use Eye-Fi cards in many countries or regions. Wit hout approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in your area, please check with the card manufacturer. 1Insert an Eye-Fi card (p.31). 2Select [Eye-Fi settings]. Under the [ 51] tab, select [ Eye-Fi settings ], then press < 0>. This menu is displayed only when an Eye-Fi card is inserted into the camera. 3Enable Eye-Fi transmission. Select [Eye-Fi trans.], then press . Select [Enable ], then press . If you set [ Disable], automatic transmission will not occur even with the Eye-Fi card inserted (transmission status icon I). H Using Eye-Fi Cards COPY
H Using Eye-Fi Cards 402 4Display the connection information. Select [ Connection info. ], then press < 0 >. 5Check the [Access point SSID:]. Check that an access point is displayed for [ Access point SSID: ]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the < M> button to exit the menu. 6Take the picture. X The picture is transferred and the icon switches from gray (not connected) to one of the icons below. For transferred images, O is displayed in the shooting information display (p.292). H(Gray) Not connected : No connection with access point. H(Blinking) Connecting... : Connecting to access point. H(Displayed) Connected : Connection to access point established. H(d ) Transferring... : Image transfer to access point in progress. Transmission status icon COPY
403 H Using Eye-Fi Cards Cautions for Using Eye-Fi Cards If [53: Wi-Fi ] is set to [ Enable], image transfer with an Eye-Fi card is not possible. If “ ” is displayed, an error oc curred while retrieving the card information. Turn the camera’s power switch off and on again. Even if [Eye-Fi trans. ] is set to [Disable], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera. If the image transfer does not function, chec k the Eye-Fi card and computer settings. For details, refer to the card’s instruction manual. Depending on the wireless LAN’s connection conditions, the image transfer may take longer or it may be interrupted. Because of the transmis sion function, the Eye-Fi card may become hot. The battery power will be consumed faster. During the image transfer, auto power off will not take effect. If you insert a wireless LAN card other than an Eye-Fi card, [Eye-Fi settings ] will not appear. Also, the transmission status icon will not appear. COPY
404 o: Set automatically k: User selectable : Not selectable/Disabled *1: RAW+JPEG and RAW ca nnot be selected. *2: Settable only for Live View shooting. Function Availability Table According to Shooting Mode Still Photo Shooting FunctionBasic ZoneCreative ZoneA7C823456FGdsfaF All image quality settings selectable kkkkkkkkk*1k*1kkkkk ISO speedAutomatically set/Auto ISOoooooooo o o kkkkkManualkkkkkPicture StyleAutomatically set/Autooooooooo o o kkkkkManual selectionkkkkkAmbience-based shotskkkkkk kLight/scene-based shotskkkkCreative filters *2kkkkkkkkkkkkk White balance Autooooooooo o o kkkkkPresetkkkkkCustomkkkkkColor temperature settingkkkkkCorrection/BracketingkkkkkAuto Lighting Optimizeroooooooo o o kkkkk Lens aberration correctionPeripheral illumination correctionkkkkkkkk k k kkkkk Chromatic aberration correctionkkkkkkkk k k kkkkk Long exposure noise reductionkkkkkHigh ISO speed noise reductionoooooooo o o kkkkkHighlight tone prioritykkkkkMultiple exposureskkkkkHDR shootingkkkkColor spacesRGBoooooooo o o kkkkkAdobe RGBkkkkk AF One-Shot AFoooo o o kkkkkAI Servo AFokkkkkAI Focus AFoookkkkkAF area selection modekkkkkAF point selectionoooooooo o o kkkkkManual focusing (MF)kkkkkkkk k k kkkkk COPY
405 Function Availability Table According to Shooting Mode *3: If the built-in flash is set to , the AF-assist beam will not be fired. *4: If the AF method is Qu ick mode during Live View shooting, the external Speedlite will emit the AF-a ssist beam when necessary. *5: With Auto ISO, you can set a fixed ISO speed. FunctionBasic ZoneCreative ZoneA7C823456FGdsfaF AF AF-assist beamo*3o*3o*3*4o*3*4oo*3okkkkkAF MicroadjustmentkkkkkContinuous AF*2kkkkkkkkk kkkkkkMetering modeEvaluative meteringo o o o o o oo o okkkkkMetering mode selectionkkkkk Exposure Program shiftkAE lockkkk*5 Exposure compensationkkkAEBkkkkDepth-of-field previewkkkkk Drive Single shootingkkkkkkkkkkkkkkkHigh-speed continuous shootingkkkkkkkkkkkkkkk Low-speed continuous shootingkkkkkkkkkkkkkkk Silent single shootingkkkkkkkkkkkkkkkSilent continuous shootingkkkkkkkkkkkkkkk 10-sec. self-timer/ Remote controlkkkkkkkkkkkkkkk 2-sec. self-timer/ Remote controlkkkkkkkkkkkkkkk Built-in flash Automatic firingkkkkoManual firingkkkkkkkkkkFlash offkok k o kok okkkkkRed-eye reductionkkkkkkkkkkkFE lockkkkkkFlash exposure compensationkkkkk Wireless controlkkkkkExternal flashFunction settingskkkkkCustom Function settingskkkkkLive View shootingkkkkkkkkkkkkkkkQuick Controlkkkkkkkkkkkkkkk COPY
Function Availability Table According to Shooting Mode 406 o: Set automatically k: User selectable : Not selectable/Disabled *1 : The z icon indicates still photo sh ooting during movie shooting. *2 : Multi Shot Noise Reduction ( M) cannot be set. Movie Shooting FunctionMovieStill PhotosA7C8dsfFaz*1 ykMykM All image quality settings selectable (movie) kkkkkkkkk All image quality settings selectable (still photos)kkk Digital zoomkkkkkkkkkVideo snapshotskkkkkkkkk ISO speedAutomatically set/Auto ISOooooooookookManualkk Picture Style Automatically set/AutoooookkkkkokkManual selectionkkkkkkk White balance AutoooookkkkkokkPresetkkkkkkkCustomkkkkkkkColor temperature settingkkkkkkk CorrectionkkkkkkkBracketingkkAuto Lighting Optimizerooookkkkkokk Lens aberration correctionPeripheral illumination correctionkkkkkkkkkkkk Chromatic aberration correctionkkkkkkkkkkkk Long exposure noise reductionkHigh ISO speed noise reduction*2ooookkkkkokkHighlight t one prioritykkkkkkkMultiple exposures HDR shooting Color spacesRGBooooooooookkAdobe RGBkk COPY
407 Function Availability Table According to Shooting Mode *3 : With Auto ISO, you can set a fixed ISO speed. *4 : Works only before you start shooting a movie. FunctionMovieStill PhotosA7C8dsfFaz*1 ykMykM AF u +Tracking kkkkkkkkkkkkFlexiZone - MultikkkkkkkkkkkkFlexiZone - SinglekkkkkkkkkkkkManual focusing (MF)kkkkkkkkkkkkMovie Servo AFkkkkkkkkkkkkMetering modeoooooooooooo Exposure Program shift AE lockkkkk*3k*3 Exposure compensationkkkkk AEB Depth-of-field preview Drive Single shootingkkkHigh-speed continuous shootingkkk Low-speed continuous shootingkkk Silent single shootingkkkSilent continuous shootingkkk 10-sec. self-timer/ Remote control *4kkk 2-sec. self-timer/ Remote control *4kkk Built-in/ External flashFlash on Sound recordingkkkkkkkkkTime codekkkkkkkkkQuick Controlkkkkkkkkkkkk COPY
408 z: Shooting 1 (Red)Page * Not selectable in < F> or < G> mode. * For movie shooting, [ VF grid display] and [Viewfinder level ] do not appear. z: Shooting 2 (Red) * For movie shooting, [ Flash control] and [Red-eye reduc. ] do not appear. Menu Settings Viewfinder Shooting and Live View Shooting Image quality1* / 41 * / 61 *11 673/83/74 /84 /7 a /8 a /b /c VF grid display Disable / Enable64 Viewfinder level Hide / Show66 Beep Enable / Touch to / Disable59 Release shutter without card Enable / Disable32 Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold60 Lens aberration correction Peripheral illumination correction: Enable / Disable Chromatic aberration correction: Enable / Disable 146 Flash control Flash firing / E-TTL II metering / Flash sync. speed in Av mode / Bu ilt-in flash settings / External flash function settings / External flash C.Fn setting / Clear settings 195 Red-eye reduction Disable / Enable190 Mirror lockupDisable / Enable182 Shaded menu options are not displayed in Basic Zone modes. COPY
409 Menu Settings z: Shooting 3 (Red)Page * During movie shooting, [ Expo.comp./AEB] will be [ Exposure comp.]. z: Shooting 4 (Red) * For movie shooting, [ Multiple exposure] and [HDR Mode ] do not appear. Exposure compensation/AEB1/3-stop increments, ±5 stops (AEB ±3 stops)167 168 ISO speed settingsISO speed / ISO speed range / Auto ISO range / Minimum shutter speed120 Auto Lighting OptimizerDisable / Low / Standard / High140OFF with M or Bulb White balanceQ/W/E /R /Y /U /D/ O / P (Approx. 2500 - 10000)134 Custom white balanceManual setting of white balance135 White balance shift/ bracketingWhite balance correction: B/A/M/G bias, 9 levels each White balance bracketing: B/A and M/G bias, single-level increments, ±3 levels138 139 Color spacesRGB / Adobe RGB155 Picture StyleD Auto / PStandard / QPortrait / R Landscape / SNeutral / UFaithful / V Monochrome / WUser Def. 1-3126 Long exposure noise reductionDisable / Auto / Enable143 High ISO speed noise reductionDisable / Low / Standard / High / Multi Shot Noise Reduction141 Highlight tone priorityDisable / Enable145 Dust Delete DataObtain data to be used by provided software to delete dust spots341 Multiple exposureMultiple exposure / Multi- expos control / No. of exposures / Continue Multiple exposure175 HDR ModeAdjust dynamic range / Continuous HDR / Auto Image Align172 COPY
Menu Settings 410 A1: Live View shooting 1 (Red)Page A2: Live View shooting 2 (Red) 3: Playback 1 (Blue) Live View shootingEnable / Disable228 AF method u +Tracking / FlexiZone - Multi / FlexiZone - Sing le / Quick mode233 Continuous AF Enable / Disable228 Touch Shutter Enable / Disable229 Grid display Off / 3x3 l / 6x4 m / 3x3+diag n229 Aspect ratio3:2 / 4:3 / 16:9 / 1:1229 Exposure simulationEnable / During e / Disable230 Silent LV shootingMode 1 / Mode 2 / Disable231 Metering timer4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.232 Protect images Erase-protect images320 Rotate image Rotate images301 Erase images Erase images322 Print order Specify images to be printed (DPOF)355 Photobook set-up Specify images for a photobook359 Creative filters Grainy B/W / Soft focu s / Fish-eye effect / Art bold effect / Water painting effect / Toy camera effect / Miniature effect335 RAW image processingProcess 1 images328 COPY