Canon 70d W User Manual

							311
X Editing a Movie’s First and Last Scenes
 3Check the edited movie.
  Select [7 ] and press < 0> to play 
back the edited movie.
  To change the editing, go back to step 
2.
  To cancel the editing, press the 
 button, then select [ OK] on 
the confirmation screen.
4Save the edited movie.
  Select [W ], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ], then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ] on the to p of the screen), the actual position where the 
movie is edited may differ from  the position you specified.
  If the card does not have  enough free space, [New file] will not be 
available.
  When the battery level is  low, movie editing is not possible. Use a fully-
charged battery.
COPY  
						

							312
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [ 32] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < V> key to select the 
desired option, then press < 0>.
[All images]/[Movies]/[Stills]
  Press the < V> key to select one of 
the following: [ jAll images]/
[k Movies]/ [zStills]. Then press 
< 0 >.
[Date]/[Folder]/[Rating]
  Press the < V> key to select one of 
the following: [ iDate ]/[
nFolder]/
[9 Rating].
  When < zH> is highlighted, 
press the < B> button.
  Press the < V> key to select the 
desired option, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
[Date][ Folder][ Rating]
COPY  
						

							313
3 Slide Show (Auto Playback)
3Set [Set up] as desired.
 Press the < V> key to select [ Set 
up], then press < 0>.
  Set the [Display time], [ Repeat] 
(repeated playback), [ Transition 
effect ] (effect when changing 
images), and [ Background music ] 
for the still photos.
  The background music selection 
procedure is explained on page 315.
  After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies on the card will be played 
back.
i DateStill photos and movi es taken on the selected shooting date 
will be played back.
nFolderStill photos and movi es in the selected folder will be played 
back.
k MoviesOnly the movies  on the card will be played back.
zStillsOnly the still photos on the  card will be played back.
9RatingOnly the still photos and movies  with the selected rating will 
be played back.
[Display time] [Repeat]
COPY  
						

							3 Slide Show (Auto Playback)
314
4Start the slide show.
 Press the < V> key to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Exit the slide show.
  To exit the slide show and return to 
the setting screen, press the 
 button.
[Transition effect ][Background music ]
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left  of the image. Press  again to resume 
the slide show. 
  During auto playback , you can press the  button to change the 
still photo display format (p.290).
  During movie playback, you can adjust  the sound volume by turning the 
 dial.
  During auto playback or  pause, you can turn the < 5> dial to view 
another image.
  During auto playback, auto  power off will not work.
  The display time may vary depending on the image.
  To view the slide show on  a TV set, see page 316.
COPY  
						

							315
3 Slide Show (Auto Playback)
After you use EOS Utility (provided  software) to copy background music 
to the card, you can play backgro und music together with the slide 
show.
1Select [Background music].
  Set [ Background music ] to [On], 
then press < 0>.
  If the card has  no background music, 
you cannot perform step 2.
2Select the background music.
  Press the < V> key to select the 
desired background music, then 
press < 0>. You can also select 
multiple background music tracks.
3Play the background music.
  To listen to a sample of the 
background music, press the 
 button.
  Press the < V> key to play another 
background music track. To stop 
listening to the background music, 
press the < B> button again.
  Adjust the sound volume by turning 
the < 6> dial.
  To delete a background music track, 
press the < V> key and select the 
track, then press the < L> button.
Selecting the Background Music
Upon purchase, the camera does  not have background music. The 
procedure to copy backgr ound music to a card is explained in the EOS 
Utility instruction ma nual on the CD-ROM.
COPY  
						

							316
You can view still photos and movies on a TV set.
HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 With the plug’s < dHDMI MINI > logo 
facing the front of the camera, insert it 
into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
 Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
Viewing Images on a TV Set
Viewing on High-Definition (HD) TV Sets 
(Connected with HDMI)
 Adjust movie sound volume with the  TV set. The sound volume cannot 
be adjusted with the camera.
  Before connecting or disconnectin g the cable between the camera and 
TV set, turn off the camera and TV set.
  Depending on the TV se t, part of the image displayed may be cut off.
COPY  
						

							317
Viewing Images on a TV Set
5Press the  button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  The images will automatically be 
displayed at the TV’s optimum 
resolution.
  By pressing the < B> button, you 
can change the display format.
  To play back movies, see page 308.
If the TV set connected to the camera  with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI device s to control each other so that you can control them with one remote control unit.
1Set [Ctrl over HDMI] to [Enable].
 Under the [ 33] tab, select [ Ctrl over 
HDMI ], then press < 0>.
  Select [Enable ], then press .
Using HDMI CEC TV Sets
The images cannot be output at  the same time from both the  
and < q > terminals.
 Do not connect any ot her device’s output to the camera’s  
terminal. Doing so ma y cause a malfunction.
  Certain TVs may not be able to disp lay the captured movies. In such a 
case, use the stereo AV cable AV C-DC400ST (sold separately) to 
connect to the TV.
COPY  
						

							Viewing Images on a TV Set
318
2Connect the camera to a TV set.
 Use an HDMI cable to connect the 
camera to the TV.
X The TV’s input will switch 
automatically to the HDMI port 
connected to the camera.
3Press the camera’s < x> button.
XAn image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image.
  Point the remote control toward the 
TV set and press the /  button to 
select an image.
5Press the remote control’s Enter 
button.
X The menu appears and you can 
perform the playback operations 
shown on the left.
 
Press the / button to select the 
desired option, then press the Enter 
button. For a slide show, press the 
remote control’s 
/ button to select 
an option, then press the Enter button.
  If you select [ Return] and press the 
Enter button, the menu will disappear 
and you can use the /  button to 
select an image.
Still photo playback menu
Movie playback menu
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting info
: Rotate
 Some TV sets require yo u to first enable the HDMI CEC connection. For 
details, refer to the TV set’s instruction manual.
  Certain TV sets, even those comp atible with HDMI CEC, may not 
operate properly. In such a case, set [ 33: Ctrl over HDMI] to [ Disable], 
and use the camera to contro l the playback operation.
COPY  
						

							319
Viewing Images on a TV Set
Stereo AV Cable AVC-DC400ST (sold separately) is required.
1Connect the AV cable to the 
camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q > terminal.
2Connect the AV cable to the TV 
set.
 Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminals.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  To play back movies, see page 308.
Viewing on Non-HD TV Sets (Connected with AV Cable)
AUDIO
VIDEO
(Red)
(White)
(Yellow)
  Do not use any AV cable other th an the Stereo AV cable AVC-DC400ST 
(sold separately). Movies may not be  displayed if you use a different 
cable.
  If the video system format does not match the TV’s, the  movies will not 
be displayed properly. If this happens,  switch to the proper video system 
format with [ 53: Video system].
COPY  
						

							320
Protecting an image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [ 31] tab, select [Protect 
images ], then press < 0>.
2Select [Select images].
  Select [Select images ], then press 
< 0 >.
X An image will be displayed.
3Protect the image.
  Turn the < 5> dial to select the 
image to be protected, then press 
< 0 >.
X The image will be protected, and the 
 icon will appear at the top of 
the screen.
  To cancel the image protection, press 
 again. The < K> icon will 
disappear.
  To protect another image, repeat step 
3.
  To return to the menu, press the 
 button.
K Protecting Images
3  Protecting a Single Image
Image protect icon
COPY