Canon 5dsr Manual

							411
3 Custom Function Settings N
Custom Controls
You can assign often-used functions to camera buttons or dials 
according to your preferences. For details, see page 413.
Add cropping information
If you set cropping information, vertic al lines for the aspect ratio you 
have set will appear on the Live View image. You can then compose 
the shot as if you were shooting  with a medium- or large-format 
camera (6x6 cm, 4x5 inch, etc.).
When you take a picture, the aspec t ratio information for cropping the 
image with the EOS software will be appended to the image. (The 
image is recorded to the card without being cropped.)
After the image is transferred to a  computer, you can use Digital Photo 
Professional (EOS software, p.521) to easily crop the image to the 
aspect ratio that was set.
OFF : Off 6:7 : Aspect ratio 6:7
6:6 : Aspect ratio 6:6 5:6 : Aspect ratio 10:12
3:4 : Aspect ratio 3:4 5:7 : Aspect ratio 5:7
4:5 : Aspect ratio 4:5
 If [z 4: Crop/aspect ratio] is set to any setting other than [ Full-frame], 
the cropping information cannot be set.
 Cropping information will also be appended for viewfinder shooting. 
However, the cropping range will not be displayed.
 Even if a RAW image with cropping information added is processed with 
the camera (p.364), the JPEG image cannot be saved as the cropped 
image. 
						

							3 Custom Function Settings N
412
Default Erase option
During image playback and image review after image capture, when 
you press the  button, the erase menu appears (p.358). You can 
set which option, [ Cancel] or [Erase], is to be preselected on this 
screen.
If [ Erase ] is set, you can just press  to quickly erase the image.
 : [Cancel] selected
L   : [Erase] selected
Retract lens on power off
This is to set the lens retracti on mechanism for when a gear-driven 
STM lens (such as EF40mm f/2.8 STM) is attached to the camera. You 
can set it to retract the extended lens automatically when the camera’s 
power switch is set to < 2>.
ON: Enable
OFF: Disable
If [ Erase] is set, be careful not to erase an image accidentally.
 With auto power off, the lens will not  retract regardless of the setting.
 Make sure that the lens has been retracted before detaching it.
When [ Enable ] is set, this function takes effect regardless of the lens’s 
focus mode switch setting (AF or MF). 
						

							413
You can assign often-used functions to camera buttons or dials according to your preferences.
1Select [83: Custom Controls].
 Under the [8 3] tab, select [Custom 
Controls ], then press < 0>.
 The Custom Controls screen to select 
control buttons and dials will appear.
2Select a camera button or dial.
 Select a camera button or dial, then 
press < 0>.
 The name of the camera control and 
the assignable functions will be 
displayed.
3Assign a function.
 Select a function, then press .
 If the [ z] icon appears on the 
bottom left, you can press the 
< B> button and set other related 
options.
4Exit the setting.
 When you press < 0> to exit the 
setting, the screen in step 2 will 
reappear.
 Press the < M> button to exit.
83: Custom Controls N
With the screen in step 2 displayed, you can press the < L> button to revert 
the Custom Control settings to their defaults. Note that the [ 83: Custom 
Controls ] settings will not be canceled even if you select [ 84: Clear all 
Custom Func. (C.Fn) ]. 
						

							83: Custom Controls N
414
Assignable Functions to Camera Controls
FunctionPage
Metering and AF start 418kk*1k*1
AF stop 419kk
Switch to registered AF function
420
ONE SHOT z AI SERVOkk
Switch to registered AF point
AF point direct selection 421
Direct AF point selection: Vertical
Pause Movie Servo AF
Metering start421k
AE lockkk
AE lock (while button pressed)
422k
AE lock (hold)kk
AE lock, AF stopkk
FE lock
kk
Set ISO speed (hold button, turn  )
Set ISO speed (  during metering)
Exposure compensation (hold button, 
turn ) 423
Shutter speed setting in M mode
Aperture setting in M mode
AF
Exposure 
						

							415
83: Custom Controls N
k
kk
k*2k*2
kk
k*3k*3
kk*4
k
kk
kkk
kkk
kk
k
k
k
kk
kk
< > stands for “AF stop button” provided on super telephoto lenses 
equipped with Image Stabilizer. 
						

							83: Custom Controls N
416
Assignable Functions to Camera Controls
FunctionPage
Switch between crop/aspect423
One-touch image quality setting
424
One-touch image quality (hold)
Image quality
Picture Style 425
Depth-of-field preview
425
IS start
Menu display
Register/recall shooting functionk*7k*7
Image playback
426
Magnify/Reduce (press SET, turn )
Cycle:  y • g/Drive • AF/WB • q
Unlock while button pressed
Flash function settings
No function (disabled)kk
Images
Operation 
						

							417
83: Custom Controls N
k*5
k*6k*6
k*6k*6
k
k
k
kk
k
k
k
k
k
k
kkkkk
< > stands for “AF stop button” provided on super telephoto lenses 
equipped with Image Stabilizer. 
						

							83: Custom Controls N
418
When you press the button assigned to this function, metering and AF 
are executed.
*1: When assigned to the < p> or  button, 
pressing the < B> button while the setting 
screen is displayed will enable you to set the 
detailed AF settings. When shooting, pressing the 
< p > or  button will execute AF as it was 
set.
 AF start position
When [Registered AF point ] is set, you can press the  or 
< A > button to switch to the registered AF point.
Registering the AF Point
1. Set the AF area selection mode to one of the following: Single-point Spot AF (manual select ion), Single-point AF (manual 
selection), AF point expansion  (manual selection  ), AF point 
expansion (manual selection, surrounding points), or 61-point 
automatic selection AF. Zone AF (manual selection of zone) 
cannot be selected.
2. Select an AF point manually.
3. Hold down the < S> button and press the < U> button. A beep 
will sound and the AF point will be registered. If the AF area 
selection mode is set to any setting other than 61-point automatic 
selection AF, the regist ered AF point will blink.
: Metering and AF start
When the AF point is registered, the following will be displayed:
• 61-point automatic selection AF:    HP (HP: Home Position)
• Spot AF, 1 pt AF, Expand AF Area:  SEL(Center),  SEL HP (Off 
center)
 To cancel the registered AF point, hold down the < S> button and press 
the < m > button. The registered AF point  will also be canceled if you 
select [ 54: Clear all camera settings ]. 
						

							419
83: Custom Controls N
AI Servo AF characteristics  (p.109)
Press the < p> or  button to perform AF with the set case 
from [ Case1 ] to [Case6 ].
 AF operation  (p.86)
Press the < p> or  button to perform AF with the set AF 
operation.
 AF area selection mode  (p.90)
Press the < p> or  button to perform AF with the set AF 
area selection mode.
If you want to keep using currently selected AF point when you press 
the < p > or  button, set [ AF start position ] to [Manually 
selected AF point ]. If you want to keep the currently set AI Servo AF 
characteristics, AF operation, and AF area selection mode, select 
[Maintain current setting ].
The AF will stop while you hold down the button assigned to this 
function. Convenient when you want to stop the AF during AI Servo AF.
: AF stop
 If [2 4: Orientation linked AF point ] is set to [Separate AF pts: 
Area+pt ] or [Separate AF pts: Pt only ], you can register the AF points 
to be used separately for vertical (grip up or down) and horizontal 
shooting.
 If [AF start position: Registered AF point ] and [AF area selection 
mode ] are both set, [ Registered AF point ] will take effect. 
						

							83: Custom Controls N
420
After setting and assigning this function to a button, you can apply the 
following settings by holding down  the assigned button for AF: AF area 
selection mode (p.90), Tracking sensitivity (p.114), Acceleration/
deceleration tracking (p.115), AF point  auto switching (p.116), Servo 1st 
image priority (p.118), and Servo  2nd image priority (p.119). Convenient 
when you want to change the AF characteristics during AI Servo AF.
*2: On the setting screen, press the < B> button to 
display the detailed settings screen. Turn the < 5> 
or < 6> dial to select the parameter to be 
registered, then press < 0> to append a 
checkmark [X ]. When you select a parameter and 
press < 0>, you can adjust the parameter.
By pressing the  button, you can revert the 
settings to their defaults.
You can switch the AF operation. In One-Shot AF mode, when you hold 
down the button to which this function is assigned, the camera switches 
to AI Servo AF mode. In the AI Servo AF mode, the camera switches to 
One-Shot AF mode only while you hold down the button. Convenient 
when you need to keep switching between One-Shot AF and AI Servo 
AF for a subject that keeps moving and stopping.
During metering, when you press the button assigned to this function, 
focusing point can be switched to the registered AF point.
*3: On the setting screen, when you press the  button, you can select [ Switch 
only when btn is held] or [ Switch each time btn is pressed]. To register the AF 
point, see page 418.
: Switch to registered AF function
: ONE SHOT  z AI SERVO
: Switch to registered AF point