Canon 5d Instruction Manual

							
141
3 Print Ordering
4 Exit the menu.
 Press the < M> button.
X The Print Order screen will reappear.
  Next, select [ Order] or [All] to select 
the images to be printed.
Print type Standard Prints one image on one sheet.IndexMultiple, thumbnail images are printed on 
one sheet.
BothPrints both the standard and index prints.
DateOn[ On ] imprints the recorded  date on the print.Off
File No.On[On ] imprints the file  No. on the print.Off
K
L
L K
 RAW images cannot be  selected for printing.
  Even if [ Date] and [ File No. ] are set to [ On], the date or fi le No. might not 
be imprinted depending on the pr int type setting and printer type. 
  With [ Index ] prints, both the [ Date] and [ File No. ] cannot be set to [ On] 
at the same time.
  When printing with DP OF, you must use the CF  card whose Print Order 
specifications have been set. It will  not work if you just extract images 
from the CF card an d try to print them.
  Certain DPOF-compatible printers and  photo labs might not be able to 
print the photos as you sp ecified. If this happens with your printer, refer 
to the printer’s instruction manual.  Or check with your photo lab about 
compatibility when ordering prints.
  Do not insert into the camera a CF ca rd containing images captured by a 
different camera and then try to orde r prints. The images specified for the 
print order might be inadvertently ov erwritten. Also, depending on the 
image type, the print orde r may not be possible.  
						

							
3 Print Ordering
142
1Select [Order].
 Turn the < 5> dial to select [ Order], 
then press < 0>.
X The order screen will appear.
2Select the image to be printed.
  Turn the < 5> dial to select the 
image to be printed.
  Press the < I> button to see a 
three-image view. To return to the 
single-image view, press the < u> 
button.
3Order the print.
  The print order will vary depending on 
the [ Print type ] (p.140) setting.
For [Standard] and [Both]
  For standard-type prints, you can set 
the quantity (up to 99) for each 
image.
  Press < 0>, then turn the < 5> dial 
to select the print quantity. Then 
press < 0>.
Selecting Individual Images for Printing
Three-image view  
						

							
143
3 Print Ordering
For [Index]
 If you want to include the image in the 
index print, checkmark < X> the box. 
Otherwise, leave the box unchecked.
  Press < 0> to checkmark the box 
< X >, or press < 0> again to remove 
the checkmark.
  If there are other images you want to 
select, repeat steps 2 and 3.
  You can select up to 998 images.
4 Exit the menu.
 Press the < M> button.
X The Print Order screen will reappear.
  Press the < M> button again to 
save the print order to the CF card. 
The menu will then reappear.  
						

							
3 Print Ordering
144
The print order can also be set or  canceled for all the images in the CF 
card. For standard-type prints, a quant ity of one will be ordered for all 
the images.
Note that after following the “Selec ting Individual Images” procedure, if 
you do the “Selecting All Images” pr ocedure, the print order will change 
to “All images.”
1Select [All].
 Turn the < 5> dial to select [ All], 
then press < 0>.
X The All screen will appear.
2Select [Mark all].
  Turn the < 5> dial to select [ Mark 
all ], then press < 0>.
X One print each will be  specified for all 
the images, then the print order 
screen will reappear.
 
If you select [Clear all ], all the images 
selected for printing  will be deselected.
 If you select [ Cancel], the print order 
screen will reappear.
3Exit the menu.
  On the Print Order screen, press the 
 button.
X The settings will be saved to the CF 
card, and the menu will reappear.
Selecting All images
  Note that RAW images ca nnot be selected for printing even when you 
set “Mark all.”
 
When using a PictBridge printer, print no  more than 500 images for one print 
order. If you specify more  than this, all the selected images might not be printed.  
						

							
145
With a printer compatible with direct printing, you can easily print 
images specified with DPOF.
1Prepare to print.
 See “Setting the Camera” (steps 1 
and 2) and “Connect the camera to 
the printer” (steps 1 to 5) on pages 
123 to 124.
2Select [Print order].
 Turn the < 5> dial to select [ x 
Print order ], then press < 0>.
X The Print Order screen will appear.
3Select [Print].
  Turn the < 5> dial to select [ Print], 
then press < 0>.
  [Print ] will be displayed only if the 
camera is connected to the printer 
and printing is possible.
X The print setting screen will appear.
4Set the printing options.
w PictBridge
 Set the [ Paper settings ] and  
printing effects. (p.126)
3 Direct Printing with DPOF
wPictBridge SBubble Jet Direct
A CP Direct  
						

							
3 Direct Printing with DPOF
146 A
CP Direct /  SBubble Jet Direct
  Set the [ Style]. (p.130/133)
5Start printing.
 Turn the < 5> dial to select [ OK], 
then press < 0>.
X The printing will start.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
  When printing with a PictBridge or Bu bble Jet Direct printer, be sure to 
set the paper size.
 
With PictBridge, the file No. cannot  be imprinted depending on the printer. If [Bordered ] is set, the date might be  imprinted on the border, 
depending on the printer.
 
The date might look light if it is im printed on a bright background or border.
 With CP Direct, if [ Print type] is set to [Index], the number of images 
printed on one index shee t will be as follows:
• Credit card size: 20 images          • 9 x 13 cm size: 42 images
• 10 x 14.8 cm size: 63 images
As for the number of in dex images with Bubble  Jet Direct, see the BJ 
printer’s instruction manual.
  If you stopped the printin g and want to resume printing the remaining 
images, select [ Resume]. Note that printing will  not resume if you stop 
the printing and any of the following occurs:
• Before resuming the printing, yo u changed the print order settings.
• Before resuming the printing, you  erased an image that was to be 
printed.
• In the case of index printing wi th CP Direct, you changed the paper 
cassette before re suming the printing.
• In the case of index printing wi th PictBridge, you changed the paper 
settings before resuming the printing.
• 
When you stopped the printing, the CF ca rd’s remaining capacity was low. If there is a printing problem, see  page 129 for PictBridge, page 132 for 
CP Direct, or page 135  for Bubble Jet Direct.  
						

							
147
Customizingthe Camera
The current camera settings  can be saved under the 
Mode Dial’s < l> setting.
Also, Custom Functions enabl e you to fine-tune your 
camera to suit your shooting preferences.
  Custom Functions work in all modes except < 1> (Full 
Auto).  
						

							
148
Most of the current camera settings can be set under the Mode Dial’s  
setting. 
Set the shooting mode  to any mode except  (Full Auto). The camera settings cannot be  registered in the  (Full Auto) mode.
1Select [Register camera settings]. 
 Turn the < 5> dial to select [ c 
Register camera settings ], then 
press < 0>.
2Select [OK].
  Turn the < 5> dial to select [ OK], 
then press < 0>.
X The following camera settings will be 
registered under the Mode Dial’s 
 setting:
Shooting settings
Shooting mode and settings, AF mode,  AF point selection, Metering 
mode, ISO speed, Drive mode, Exposur e compensation, Flash exposure 
compensation, White balance
Menu settingsQuality, Beep, Shoot w/o card, AEB,  WB SHIFT/BKT, Custom WB, Color 
temp., Color space, Picture Style, Re view time, AF points, Histogram, Auto 
power off, Auto rotate, LCD bright ness, File numbering (method), Custom 
Functions (C.Fn)
3  Register Camera Settings N
Even when the Mode Dial is set to the  setting, you can  still change the 
drive mode and menu sett ings. If you want to include those changes under 
the < l> setting, just follow the above procedure.
  To view the settings re gistered under the  setting, set the Mode Dial 
to the < l> setting and press the < B> button. The registered 
settings will be displa yed on the LCD monitor.
  To revert the < l> setting to the default, select [ Clear registered 
camera set. ] with step 2 explained on pa ge 150. The settings will be 
reset to the settings  shown on page 37.  
						

							
149
1Select [Custom Functions (C.Fn)]. 
 Turn the < 5> dial to select [ c 
Custom Functions (C.Fn) ], then 
press < 0>.
X The Custom Function screen will 
appear.
2Select Custom Function No.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
3Change the setting.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
  Repeat steps 2 and 3 if you want to 
set other Custom Functions.
 
On the bottom of the screen, you can see 
the current Custom Function settings.
4Exit the menu.
  Press the < M> button to return 
to the menu.
  When you exit the menu, < K> will 
be displayed on the LCD panel.
3 Setting a Custom Function N
Custom Function No.
Description
Even if the C.Fn-00 focusing screen setting is changed from C.Fn-00-0 to 
something else, < K> will not be displayed on the LCD panel.  
						

							
3 Setting a Custom Function N
150
1Select [Clear settings]. 
 Turn the < 5> dial to select [ c 
Clear settings ], then press .
X The Clear settings screen will appear.
2Select [Clear all Custom 
Functions]. 
  Turn the < 5> dial to select [ Clear all 
Custom Functions ], then press 
< 0 >.
3Select [OK].
 Turn the  dial to select [OK], then 
press . All the Custom Functions 
will be reset to the default settings.
Resetting All Custom Functions N
 The C.Fn-00 focusing screen  setting will not be canceled.
  When the shooting mode is < l>, the camera settings and Custom 
Function settings cannot be reset  or cleared to the default settings.