Canon 5d Instruction Manual

							
131
APrinting with CP Direct
4Set the options as desired.
  Set the [ Image], [Borders ], and 
[ Date ] as desired.
  Turn the < 5> dial to select the menu 
item, then press < 0>.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
  [Image ] is selectable when card-size 
paper is used. If you select [ Multiple], 
8 small images of the same picture 
will be printed on the paper.
  Check the [ Borders] and [Date] 
settings and set them if necessary.
  When you are done, press the 
 button to return to the print 
setting screen.
5Set the number of copies.
  Set as necessary.
  Turn the < 5> dial to select [ copies], 
then press < 0>.
  Turn the < 5> dial to set the number 
of copies, then press < 0>.
  Set a number from 1 to 99.
[Image]
[
Borders]
[
Date]  
						

							
APrinting with CP Direct
132
6Set the trimming.
  Set as necessary.
  For details on trimming, see page 
136.
7Start printing.
 Turn the < 5> dial to select [ Print], 
then press < 0>.
X The printing will start.
  When the printing ends, the screen 
will return to step 1.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
  The date may look light if it is imprint ed on a bright background or border.
  If [Multiple ] is selected, [ Borders] and [Date] cannot be selected. 
[ Borderless ] will be set and [ Date] will be set to [ Off]. The image will 
also be cut off along all four edges.
  If [Date ] is [On], the date recor ded for the image will  appear on the print. 
The date will appear on th e lower right of the image.
  If you select [ Stop] while printing only one pi cture, the printing will not 
stop until it finishes  printing the picture. If yo u are printing multiple 
pictures, the printing will  stop after the current picture is finished printing.
  If a problem occurs during printing,  an error message will appear on the 
camera’s LCD monitor. Select [ Stop] or [Continue ] (after resolving the 
problem). If [ Continue] is not displayed, select [ Stop].  
						

							
133
1Select the image to be printed.
 Check that the < S> icon is displayed 
on the upper left of the LCD monitor.
  Turn the < 5> dial to select the 
image to be printed.
2Press < 0>.
XThe print setting screen will appear.
3Select [Style].
  Turn the < 5> dial to select [ Style], 
then press < 0>.
X The Style screen will appear.
SPrinting with Bubble Jet Direct
Printer connected icon
Print setting screen
Sets the quantity to be printed.
Sets the trimming area.
Sets the printing style.
Returns to step 1. 
Starts the printing.
The printing style sett ings are displayed. 
<
H> is the date icon.  
						

							
SPrinting with Bubble Jet Direct
134
4Set the options as desired.
  Turn the < 5> dial to select the menu 
item, then press < 0>.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
  [Paper ] is the size of the paper 
loaded in the printer.
  Check the [ Borders] and [Date] 
settings and set them if necessary.
  When you are done, press the 
 button to return to the print 
setting screen.
5Set the number of copies.
  Set as necessary.
  Turn the < 5> dial to select [ copies], 
then press < 0>.
  Turn the < 5> dial to set the number 
of copies, then press < 0>.
  Set a number from 1 to 99.
6Set the trimming.
 Set as necessary.
  For details on trimming, see page 
136.
[Paper]
[
Borders]
[
Date]  
						

							
135
SPrinting with Bubble Jet Direct
7Start printing.
  Turn the < 5> dial to select [ Print], 
then press < 0>.
X The printing will start.
  When the printing ends, the screen 
will return to step 1.
  To stop the printing, press < 0> while 
[ Stop ] is displayed, then turn the 
< 5 > dial to select [ OK] and press 
< 0 >.
If [Bordered ] is set, the date might be impr inted on the border, depending 
on the printer.
  If [Date ] is [On], the date recor ded for the image will  appear on the print. 
The date will appear on th e lower right of the image.
  If you select [ Stop] during the printing, the pict ure being printed will stop 
printing and the pape r will be discharged.
  If a problem occurs during printing,  an error message will appear on the 
camera’s LCD monitor. Select [ Stop] or [Continue ]. If you select 
[ Continue ] and the print er does not resume printing, it will resume 
automatically after yo u resolve the problem.
  If you are using a BJ pr inter equipped with an operation display panel, 
the error No. will be displayed if  an error occurs. To resolve the 
respective error, refer to the  BJ printer’s instruction manual.  
						

							
136
You can trim the image and print only the trimmed portion as if the 
image was recomposed.
Do the trimming right before printing. If you set the trimming and 
then set the print settings, you may have to set the trimming again.
1Select [Trimming].
 Turn the < 5> dial to select 
[ Trimming ], then press < 0>.
X The trimming screen will appear.
2Trim the image.
  The image area within the trimming 
frame will be printed.
  The operation guide disappears while 
you trim the image. It will reappear 
after 5 sec. of idle time.
Changing the trimming frame size
 When you press the < u> or 
< I > button, the size of the 
trimming frame will change. The 
smaller the trimming frame, the larger 
the image magnification will be.
Moving the trimming frame
  Use < 9> to scroll around the image 
in any direction. Move the trimming 
frame until it shows the desired image 
area or composition.
Rotating the frame
  The < B > button toggles 
between the vertical and horizontal 
orientation of the trimming frame. For 
example, a horizontal shot can be 
printed as a vertical shot.
Setting the Trimming  
						

							
137
Setting the Trimming
3Exit the menu.
 Press < 0>.
X The Print setting screen will reappear.
X On the upper left, you can see the 
trimmed image area that will be 
printed.
Image area to be printed
  Depending on the printer , the trimmed image area  might not be printed 
as you specified.
  The smaller you make the trimming fr ame, the grainier the picture will 
look. If the picture will be too grainy , the trimming frame will turn red.
  While trimming the image, look at th e camera’s LCD monitor. If you look 
at the image on a TV sc reen, the trimming frame  might not be displayed 
accurately.
The trimming frame shape will be  different depending on the [Paper 
settings ], [Image ] / [Paper ], [Page layout ] / [Borders ] settings.  
						

							
138
When you print directly from your camera to your printer, the printing 
settings will be saved in your came ra. To use the same settings again, 
follow the steps below.
1Connect the camera to a printer 
and prepare for printing.
2Playback the images and select 
the ones to be printed.
3Press the  button that lights 
in blue.
X The blue lamp will blink and printing 
will start.
Easy Printing
  With Easy Printing,  only one print can be  printed each time.
  With Easy Printing, any cropping  (trimming) will not be applied.
  With C.Fn-18-1, printing will  not be possible with the  button.  
						

							
139
DPOF: Digital PrintOrder Format
With DPOF (Digital Print  Order Format), you can use 
the camera to specify which  images in the CF card are 
to be printed and the quantity. This feature is very 
convenient when you make  prints with a DPOF-
compatible printer or photo lab.
About DPOF
DPOF (Digital Print Order Forma t) is a standard for recording 
print ordering instructions to the  CF card. It is for images taken 
with a digital camera, and you can specify which photos and 
the quantity to print. With a DPOF-compatible digital camera, 
you can do the following:
  By inserting a CF card into a DPOF-compatible 
printer, you can make prints as specified.
  Printers capable of direct printing from 
the camera can print the images as 
specified by DPOF.
  When ordering prints from a photo 
lab, you do not need to fill in any 
order form to specify the image 
selections, quantity, etc.  
						

							
140
Set the print type, date imprinting, and file No. imprinting. The print 
settings will be applied to all print- ordered images. (They cannot be set 
individually for each image.)
1Select [Print order].
 Turn the < 5> dial to select [ x 
Print order ], then press < 0>.
X The Print Order screen will appear.
2Select [Set up].
  Turn the < 5> dial to select [ Set up], 
then press < 0>.
X The print setting screen will appear.
3Set the options as desired.
  Set the [ Print type ], [Date ], and [ File 
No. ].
  Turn the < 5> dial to select the menu 
item, then press < 0>.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
3 Print Ordering
Print Settings
[Print type][Date][File No.]