Candy Goy 105 Df User Instructions

 
  41
Contents
  Page 
 
Preface  42 
General delivery notes  42 
Technical data  43 
Safety notes  44 
Quick start  46 
Useful advice for the users  46 
Installation  47 
Water supply  47 
When using your new Infotext for the first time 49 
A detailed guide around your Infotext menu  51 
Description of controls  54 
Detergents, washing aids and amounts to use 62 
Program selector  64 
Main wash  66 
Table of programs  70 
Cleaning and routine maintenance  72 
Transporting storing the appliance for...

 
 42
Preface 
 
Read these instructions for use and all other information enclosed with the washing ma-
chine and act accordingly. 
Keep all documentation for future reference or for any future owners. 
 
Note: this machine is solely for domestic use. 
 
Notes on disposal 
All packaging material used is environmentally-friendly and recyclable. Please help dis-
pose of the packaging via environmentally-friendly means. 
Your supplier or local council will be able to give you details of current means of...

 
 43
Technical data 
 
Maximum wash load dry kg 5 
Supply voltage V 220-240 
Power input W 1850 
Energy consumption (prog. 90°C) kWh 1,8 
Power current fuse amp А 10 
Normal water level L 6…15 
Water pressure МРа  min. 0,05 max. 0,8 
SPIN  r.p.m.  1000 
 
NB: For specifications regarding electrical data, see the data panel on the front of the 
washing machine (porthole area). 
 
 Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced 
by 2006/95/EC and 2004/108/EC, and...

 
 44
Electricity supply and safety advice 
Washing machines are supplied to operate at a voltage of 220-240V, 50 Hz single-phase. 
Check that the conductor is powerful enough to supply at least 3.0 kW, then connect the 
plug to a 10A earthed socket. 
After installation, the appliance must be positioned so that the plug is accessible. 
Check that the electricity supply to your home has an earthing system. 
The socket in your home and the plug on the appliance must be of the same type. 
It is generally...

 
 45
l. Do not touch the appliance when hands or feet are wet or 
damp. Do not use the appliance with bare feet; 
 
 
 
 
 
m. Check there is no water left in the 
drum before opening the door; 
 
WARNING! 
During the washing cycle, the water 
can reach a temperature of 90°С. 
 
n. Glass fibre curtains should never be put into this machine; 
N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on 
the sheet are not obstructed. 
o. Lint or fluff must not be allowed to...

 
 46
Quick Start 
Washing 
– Press the button inside the door handle to open the door. 
– Select laundry and put it in the machine. 
– Close the door. 
– Put detergent in the dispenser compartments, compartment 1 for pre wash and com-
partment 2 for all other programs. 
– Select program by turning the program knob (Your desired program may be seen on the 
display). 
– Adjust the wash temperature if necessary. 
– Select any function buttons required and then press the Start/Pause button ( ). 
– There...

 
 47
Installation 
After removing the machine from the packaging, proceed as 
follows: 
On the back of the machine: 
 
 
1) Carefully cut the securing strap that holds the main cord 
and the drain hose. 
 
 
 
 
2) Fix the sheet of corrugated material on the bottom as it is 
shown on picture. You can find the fastener means in the 
instruction booklet pack. 
 
N.B! If the appliance is installed on a carpeted floor en-
sure that the ventilation holes on the sheet are not ob-
structed. 
 
 
 
3) Remove...

 
 48
 
) Use the 4 feet to level the machine with the floor: 
a) Turn the nut clockwise to release the screw adjuster of the 
foot. 
b) Rotate foot to raise or lower it until it stands firmly on the 
ground. 
c) Lock the foot in position by turning the nut anti-clockwise until 
it comes up against the bottom of the machine. 
 
Water supply 
The machine has an inlet hose with ¾ threaded ferrules fitted 
to the ends to attach between the threaded connector on the 
appliance and the cold water supply....

 
 49
When using your new Infotext for the first time 
A quick guide around your Candy Infotext menu: 
Connect product up to the electric / water supplies and drainage (see Water supply). 
Select any wash program. After a short time a message will be displayed: 
 
 WELCOME 
0.00  
 
accurate time can be reset later. 
12 COTTON 
«1:50» 90 
 
this is displayed if prog. 1 is selected. 
Prior to entering the Infotext pre set, remember time is limited while you decide on your 
options (30 sec. / section). If...

 
 50
SET FINAL BEEP 
YES  
if NO is displayed press (). 
Press () 
ENABLE MEMORY ? 
YES  
if NO is displayed press the (). 
Press () 
SET DEMO MODE ? 
NO  
always select NO, if YES press (). 
Press () 
EXIT MENU? 
YES  
if NO is displayed press the (). 
Press () 
12 COTTON 
«1:50» 90 
 
reverts back to the wash program selected. 
 
You are now able to select any wash program. You can if you wish also set a delay start. 
Where more detailed information is required refer to the relevant section from the...