Home > Candy > Washing Machine > Candy Goy 105 Df User Instructions

Candy Goy 105 Df User Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Candy Goy 105 Df User Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 121 Candy manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
     
      41
    Contents
      Page 
     
    Preface  42 
    General delivery notes  42 
    Technical data  43 
    Safety notes  44 
    Quick start  46 
    Useful advice for the users  46 
    Installation  47 
    Water supply  47 
    When using your new Infotext for the first time 49 
    A detailed guide around your Infotext menu  51 
    Description of controls  54 
    Detergents, washing aids and amounts to use 62 
    Program selector  64 
    Main wash  66 
    Table of programs  70 
    Cleaning and routine maintenance  72 
    Transporting storing the appliance for long periods when  
    appliance is not in use  73 
    Trouble shooting  74 
    Customer service  75 
     
    Before switching on the appliance make sure it is correctly installed and 
    that the transit brackets are removed as shown in chapter Installation. 
     
    						
    							
     
     42
    Preface 
     
    Read these instructions for use and all other information enclosed with the washing ma-
    chine and act accordingly. 
    Keep all documentation for future reference or for any future owners. 
     
    Note: this machine is solely for domestic use. 
     
    Notes on disposal 
    All packaging material used is environmentally-friendly and recyclable. Please help dis-
    pose of the packaging via environmentally-friendly means. 
    Your supplier or local council will be able to give you details of current means of 
    disposal. 
    Appliances which are finished with are not worthless rubbish! Valuable materials can be 
    salvaged via scrap reprocessing. 
    Note: pull out the mains plug from appliances which are finished with. Cut the power ca-
    ble and dispose of it, together with the plug. 
    When disposing of an old washing machine, please ensure that the porthole lock is ren-
    dered inoperable to prevent children shutting themselves in the appliance. 
     
     
     
    General delivery notes 
     
    On delivery check that there is the following with the appliance: 
    • Instruction manual; 
    • Customer service addresses; 
    • Guarantee certificates; 
    • Caps; 
    • Bend for outlet tube; 
    • Filling hose 
    and check that no damage has occurred during transit, and if so, call your nearest Author-
    ized Technical Support Service agent (see Customer Service). 
     
    						
    							
     
     43
    Technical data 
     
    Maximum wash load dry kg 5 
    Supply voltage V 220-240 
    Power input W 1850 
    Energy consumption (prog. 90°C) kWh 1,8 
    Power current fuse amp А 10 
    Normal water level L 6…15 
    Water pressure МРа  min. 0,05 max. 0,8 
    SPIN  r.p.m.  1000 
     
    NB: For specifications regarding electrical data, see the data panel on the front of the 
    washing machine (porthole area). 
     
     Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced 
    by 2006/95/EC and 2004/108/EC, and subsequent amendments. 
     
    						
    							
     
     44
    Electricity supply and safety advice 
    Washing machines are supplied to operate at a voltage of 220-240V, 50 Hz single-phase. 
    Check that the conductor is powerful enough to supply at least 3.0 kW, then connect the 
    plug to a 10A earthed socket. 
    After installation, the appliance must be positioned so that the plug is accessible. 
    Check that the electricity supply to your home has an earthing system. 
    The socket in your home and the plug on the appliance must be of the same type. 
    It is generally not advisable to use multiple adapters and/or extension leads. 
    All Candy washing machines comply with the safety requirements laid down by the Quality 
    Trademark Institute. 
     
    Safety notes 
    Note: for any cleaning or maintenance procedure for the washing machine: 
     
    a. Pull out the plug; 
    b. Candy equips all its appliances with 
    earthing. Ensure that the mains supply is 
    earthed, and if it is not, seek assistance from 
    a qualified person. 
    c. Do not use adaptors or multiple plugs; 
     
     
     
     
    d. Do not pull the power cable or the appliance 
    itself to remove the plug from the socket. 
       
    e. Do not allow children or unauthorised persons to use the appliance without supervision; 
    f. The appliance must not be exposed to weather conditions (rain, direct sun, etc...); 
    g. When moving the appliance never lift it by the controls or by the detergent drawer. 
    When in transit never rest the porthole against the trolley; 
    h. The appliance should be lifted by two people. 
    i. After the machine has been installed, ensure that the mains plug 
    and water supply valves are easily accessible.  
    j. Extreme care should be taken if extension leads are used in 
    bathrooms or shower rooms. Avoid this where possible. 
     
    k. Turn off the water inlet tap; 
     
     
    						
    							
     
     45
    l. Do not touch the appliance when hands or feet are wet or 
    damp. Do not use the appliance with bare feet; 
     
     
     
     
     
    m. Check there is no water left in the 
    drum before opening the door; 
     
    WARNING! 
    During the washing cycle, the water 
    can reach a temperature of 90°С. 
     
    n. Glass fibre curtains should never be put into this machine; 
    N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on 
    the sheet are not obstructed. 
    o. Lint or fluff must not be allowed to collect on the floor around the outside of this ma-
    chine; 
    p. Always ensure that the door locked indicator neon has switched itself off before opening 
    the door. By doing so the machine is allowed to cool down before the laundry is handled; 
    q. Always ensure that the base panel is fitted to the machine. 
    r. If the appliance is not running properly or breaks down, switch it off, turn off the tap and 
    do not tamper with the appliance. 
    Consult only the Authorised Technical Support Service for possible repair and ask them to 
    use original spare parts. 
    Failure to comply with the above can compromise the safety of the appliance. 
    If the appliance’s power cable should ever need replacing, consult the Authorised Techni-
    cal Support Service. 
     
    						
    							
     
     46
    Quick Start 
    Washing 
    – Press the button inside the door handle to open the door. 
    – Select laundry and put it in the machine. 
    – Close the door. 
    – Put detergent in the dispenser compartments, compartment 1 for pre wash and com-
    partment 2 for all other programs. 
    – Select program by turning the program knob (Your desired program may be seen on the 
    display). 
    – Adjust the wash temperature if necessary. 
    – Select any function buttons required and then press the Start/Pause button ( ). 
    – There may be a short time delay from pressing the start/pause bottom to the start of the 
    program, while the machine senses the water required and sets the parameters for the 
    program. 
     
    When the program has finished 
    – The display will read “DOOR LOCKED-WAIT TO OPEN”. 
    – After 2 minutes the display will read “PROGRAM ENDED - DOOR OPEN”. 
    – Switch off the machine by turning the control knob to the off position. 
    – Open the door and remove the laundry. 
    Disconnect the plug from the mains power supply and turn off the water supply after every 
    use. 
     
     
    Useful advice for users 
    Tips on using your domestic appliance in the most environmentally-friendly and economi-
    cal way. 
    Do a full load in your washing machine. 
    To prevent any possible waste of energy, water or detergent we recommend that 
    you put a full load in your washing machine, not exceed the maximum load size. 
    Save up to 50% energy by washing a full load instead of 2 half loads. 
     
    When is prewashing really needed? 
    Only with particularly dirty loads! Energy savings of 5 to 15% are made by not selecting the 
    prewash option for normally soiled laundry. 
     
    Which wash temperature should you choose? 
    Using stain removers before machine washing reduces the need to wash at temperatures 
    over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature. 
     
    						
    							
     
     47
    Installation 
    After removing the machine from the packaging, proceed as 
    follows: 
    On the back of the machine: 
     
     
    1) Carefully cut the securing strap that holds the main cord 
    and the drain hose. 
     
     
     
     
    2) Fix the sheet of corrugated material on the bottom as it is 
    shown on picture. You can find the fastener means in the 
    instruction booklet pack. 
     
    N.B! If the appliance is installed on a carpeted floor en-
    sure that the ventilation holes on the sheet are not ob-
    structed. 
     
     
     
    3) Remove the 4 fixing screws 
    marked (A) and remove the 4 
    spacers marked (B) 
     
    4) Cover the 4 holes using the 
    caps provided in the instruction 
    booklet pack. 
      
     
    Note: we recommend you keep the spacers and screws to immobilize the ma-
    chine for future transit. The Manufacturers will not be responsible for any possi-
    ble damage to the machine caused by not following the rules relating to releasing 
    the mechanism. The user is responsible for all costs of installation. 
     
    WARNING!  
    Do not leave the packaging in the reach of children as it is a potential source of danger. 
     
     
    						
    							
     
     48
     
    ) Use the 4 feet to level the machine with the floor: 
    a) Turn the nut clockwise to release the screw adjuster of the 
    foot. 
    b) Rotate foot to raise or lower it until it stands firmly on the 
    ground. 
    c) Lock the foot in position by turning the nut anti-clockwise until 
    it comes up against the bottom of the machine. 
     
    Water supply 
    The machine has an inlet hose with ¾ threaded ferrules fitted 
    to the ends to attach between the threaded connector on the 
    appliance and the cold water supply.  
    The appliance must be connected to the water mains using n
    hose-sets. The old hose-sets should not be reused. 
    ew 
    ly. 
    ection to a warm water supply, that is over 40°, may dam-
    The appliance must only be connected to the cold water supp
    Conn
    age certain delicate fabrics. 
    Note: it is advisable to turn off the tap after each wash to 
    isolate the washing machine from the water supply. 
    If the inlet hose’s connection point is changed, check that the 
    ¾ threaded ferrule on the inlet hose is firmly attached to the 
    electrovalve connector. 
    For the washing machine to function properly the terminal end of the discharge 
    hose (mouth) must be at a minimum of 50 cm and a maximum of 85 cm from the 
    ground. 
     
     
    						
    							
     
     49
    When using your new Infotext for the first time 
    A quick guide around your Candy Infotext menu: 
    Connect product up to the electric / water supplies and drainage (see Water supply). 
    Select any wash program. After a short time a message will be displayed: 
     
     WELCOME 
    0.00  
     
    accurate time can be reset later. 
    12 COTTON 
    «1:50» 90 
     
    this is displayed if prog. 1 is selected. 
    Prior to entering the Infotext pre set, remember time is limited while you decide on your 
    options (30 sec. / section). If you run out of time start from this point again. 
    Hold down at the same time the () and () buttons for 5 sec. until screen changes to: 
     
     SET CONTRAST  
     
    to adjust contrast, press the ( ) button. 
    Press ( ) (This confirm and enters an option) 
     
    ADOPT LANGUAGE 
    ENGLISH  
    Your washing machine is automatically set to 
    English. 
     
    Press () 
    SET NEW TIME 
    hh:  
    to change hours press the ( ) until correct. 
     
    Press () 
    SET NEW TIME 
    mm:  
    to change mins press the ( ) until correct. 
    Press () 
    SET TIME MODE 
    ABSOLUTE  
    if RELATIVE is displayed press ( )  
    (This changes a menu option). 
    Press () 
     
    						
    							
     
     50
    SET FINAL BEEP 
    YES  
    if NO is displayed press (). 
    Press () 
    ENABLE MEMORY ? 
    YES  
    if NO is displayed press the (). 
    Press () 
    SET DEMO MODE ? 
    NO  
    always select NO, if YES press (). 
    Press () 
    EXIT MENU? 
    YES  
    if NO is displayed press the (). 
    Press () 
    12 COTTON 
    «1:50» 90 
     
    reverts back to the wash program selected. 
     
    You are now able to select any wash program. You can if you wish also set a delay start. 
    Where more detailed information is required refer to the relevant section from the following 
    pages. 
     
    						
    All Candy manuals Comments (0)

    Related Manuals for Candy Goy 105 Df User Instructions