Brother MFC J825DW User Manual

Printing photos from a camera55
9
Printing photos 
directly from a digital 
camera 
(without PictBridge)
9
If your camera supports the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
(If you would like to print photos in PictBridge 
mode, see Printing photos directly from a 
PictBridge camera uu page 52.) 
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied with...

56
A
Cleaning and checking 
the machine
A
Cleaning the outside of the 
machineA
Clean the Touchscreen as follows:
IMPORTANT
• Turn off the power switch when you clean the Touchscreen.
• DO NOT use any type of liquid cleaners  (including ethanol).
 
aClean the Touchscreen with a  dry, soft 
lint-free cloth.
 
Clean the outside of the machine as 
follows:
IMPORTANT
• Use neutral detergents. Cleaning with  volatile liquids such as thinner or benzine 
will damage the outside surface of the 
machine.
• DO NOT...

Routine maintenance57
A
dWipe the paper tray with a  dry, soft 
lint-free cloth to remove dust.
 
eClose the output paper tray cover and 
put the paper tray firmly back in the 
machine.
Cleaning the machine’s 
printer platenA
WARNING 
Be sure to unplug the machine from the 
electrical socket before cleaning the printer 
platen to avoid an electrical shock.
 
aUsing both hands, grasp the plastic tabs 
on both side of the machine to lift the 
scanner cover into the open position.
bClean the machine’s...

58
Cleaning the paper feed 
rollersA
If the paper feed rollers are stained with ink, it 
may cause paper feed problems.
aUnplug the machine from the electrical 
socket. Pull the paper tray (1) 
completely out of the machine.
 
Note
If the paper support flap is open, close it, 
and then close the paper support.
 
bClean the front side of the Paper Feed 
Rollers (1) with a soft lint-free cloth 
slightly moistened with water, using a 
side-to-side motion.
After cleaning, wipe the rollers with a 
dry, soft...

Routine maintenance59
A
Cleaning the paper pick-up 
rollersA
aUnplug the machine from the electrical 
socket.
bPull the paper tray completely out of the 
machine.
Note
If the machine starts to multi-feed the last 
few sheets of paper in the tray, clean the 
Base Pad (1) with a soft lint-free cloth 
slightly moistened with water.
After cleaning, wipe the pad with a dry
, 
soft lint-free cloth to remove all moisture.
 
 
cOpen the Jam Clear Cover (1) at the 
back of the machine.
 
dClean the Paper Pick-up...

60
Checking the ink volumeA
Although an ink volume icon appears on the 
LCD, you can use the ink menu to see a large 
graph showing the ink that is left in each 
cartridge.
a(DCP-J925DW only)
Press dor c to display  Ink.
bPress  or  Ink.
cPress  Ink Volume .
The LCD shows the ink volume.
dPress  Stop/Exit.
Note
You can check the ink volume from your 
computer. 
uuSoftware User’s Guide:  Printing 
(Windows
®) 
uuSoftware User’s Guide:  Printing and 
Faxing  (Macintosh)
 
Packing and shipping 
the machine...

Routine maintenance61
A
IMPORTANT
• Make sure the plastic tab on the right side of the orange protecti ve part (1) clicks 
securely into place (2).
• If you are not able to find the orange  protective part, ship the machine without 
it. DO NOT install the ink cartridges as an 
alternative before shipping.
 
dOpen the scanner cover and remove the 
Disc Tray. Place the disc tray in the 
folded piece of cardboard and tape it 
together.
eLift the machine from the front and hook 
the tab of the orange...

62
iUsing both hands, grasp the plastic tabs 
on both sides of the machine and gently 
close the scanner cover.
 
jWrap the ink cartridges in the bag and 
tape it on to the paper tray.
 
kWrap the machine in the bag. 
lPack the machine and the printed 
materials in the original carton with the 
original packing material as shown 
below.
Note
If you are returning your machine to 
Brother as part of the Exchange Service, 
pack only the machine. Keep all separate 
parts and printed materials to use with...

63
B
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of 
these features depends on the model you purchased.
B
GlossaryB
ADF (automatic document feeder)The document can be placed in the ADF 
and scanned one page at a time 
automatically.
Auto Reduction Reduces the size of incoming faxes.
Automatic fax transmission Sending a fax without picking up the 
handset of an external telephone.
Automatic Redial A feature that enables your machine to 
redial the last...

64
Dual AccessYour machine can scan outgoing faxes or 
scheduled jobs into memory at the same 
time it is sending a fax from memory or 
receiving or printing an incoming fax.
ECM (Error Correction Mode) Detects errors during fax transmission 
and resends the pages of the fax that had 
an error.
Extension telephone A telephone using the same line as your 
fax but plugged into a separate wall 
socket.
External telephone A TAD (telephone answering device) or 
telephone that is connected to your 
machine....