Brother MFC J6510DW User Manual

Printing photos from a memory card or USB Flash memory drive55
8
Auto Crop8
You can scan multiple documents placed on 
the scanner glass. An individual document 
can be previewed on the LCD before you 
save it. When you choose Auto Crop, the 
machine will scan each document and create 
separate files. For example, if you place three 
documents on the scanner glass, the 
machine will scan and create three separate 
files. If you want to create a three page file, 
choose  PDF or TIFF for  File Type .
(If...

Chapter 8
56
IMPORTANT
DO NOT take out the memory card or 
USB Flash memory drive while 
PHOTO CAPTURE  is blinking to avoid 
damaging the card, USB Flash memory 
drive or the data stored on them.
 
How to set a new default8
You can save the Scan to Media settings 
(Quality,  File Type , Glass ScanSize  
and  Auto Crop ) you use most often by 
setting them as the default settings. These 
settings will stay until you change them again.
aPress ( SCAN).
bPress aor b to choose 
Scan to Media .
Press  OK....

57
9
9
Printing photos 
directly from a 
PictBridge camera
9
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. 
(See  Printing photos directly from a digital 
camera (without PictBridge)  on page 59.)
PictBridge requirements9
To avoid errors, remember the following...

Chapter 9
58
 When your camera does not have any 
menu selections, these settings are also 
used.
 The names and availability of each setting 
depends on the specification of your 
camera.
Please refer to the documentation supplied 
with your camera for more detailed 
information on changing PictBridge settings.
Printing Images9
Note
Remove any memory cards or USB Flash 
memory drive from the machine before 
connecting a digital camera.
 
aMake sure that your camera is turned 
off. Connect your camera...

Printing photos from a camera59
9
Printing photos 
directly from a digital 
camera 
(without PictBridge)
9
If your camera supports the USB Mass 
Storage standard, you can connect your 
camera in storage mode. This enables you to 
print photos from your camera.
(If you would like to print photos in PictBridge 
mode, see Printing photos directly from a 
PictBridge camera on page 57.) 
Note
The name, availability and operation differ 
among digital cameras. Please refer to the 
documentation supplied with...

60
A
Cleaning and checking 
the machine
A
Cleaning the outside of the 
machineA
IMPORTANT
• Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine 
will damage the outside surface of the 
machine.
• DO NOT use cleaning materials that  contain ammonia.
• DO NOT use isopropyl alcohol to remove  dirt from the control panel. It may crack the 
panel.
 
Clean the outside of the machine as 
follows:
A
aPull the paper trays (1) completely out of 
the machine.
 
 
bWipe the outside of...

Routine maintenance61
A
Cleaning the machine’s 
printer platenA
CAUTION 
Be sure to unplug the machine from the 
electrical socket before cleaning the printer 
platen.
 
aUsing both hands, use the finger holds 
on each side of the machine to lift the 
scanner cover into the open position.
bClean the machine’s printer platen (1) 
and the area around it, wiping off any 
scattered ink with a 
dry, soft lint-free 
cloth.
 
IMPORTANT
DO NOT touch the plate (2) and lever (3). 
Doing this may cause damage to...

62
cLift the Jam Clear flap (2), and then 
clean the back side of the Paper Feed 
Rollers (1) with a soft lint-free cloth 
moistened with water.
After cleaning, wipe the rollers with a 
dry, lint-free soft cloth to remove all 
moisture.
 
dPut the paper tray firmly back in the 
machine.
eRe-connect the power cord.
Note
Do not use the machine again until the 
rollers are dry. Using the machine before 
the rollers are dry may cause paper feed 
problems.
 
Cleaning the paper pick-up 
rollersA
aUnplug the...

Routine maintenance63
A
cOpen the Jam Clear Cover (1) at the 
back of the machine.
 
dClean the Paper Pick-up Rollers (1) with 
a soft lint-free cloth moistened with 
water.
Slowly turn the rollers so that the whole 
surface is cleaned.
After cleaning, wipe the rollers with a 
dry, lint-free soft cloth to remove all 
moisture.
 
eClean the Back Paper Feed Rollers (1) 
with a soft lint-free cloth moistened with 
water.
Slowly turn the rollers so that the whole 
surface is cleaned.
After cleaning, wipe the...

64
Cleaning the paper pick- up 
rollers for paper tray #2 
(MFC-J6710DW only)A
aUnplug the machine from the electrical 
socket. Pull tray #2 completely out of the 
machine.
Note
If the paper support flap is open, close it, 
and then close the paper support.
 
bClean the paper pick-up rollers for 
tray #2 (1) with a soft lint-free cloth 
moistened with water.
Slowly turn the rollers so that the whole 
surface is cleaned.
After cleaning, wipe the rollers with a 
dry, lint-free soft cloth to remove all...