Brother MFC J6510DW User Manual

Printing photos from a memory card or USB Flash memory drive45
8
Print All Photos8
You can print all the photos on your memory 
card or USB Flash memory drive.
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press (PHOTO CAPTURE).
bPress aor b to choose 
Print All Photos .
Press  OK.
cEnter the number of copies you want 
using the dial pad.
dDo one of the following: 
 Change the print settings. (See 
PhotoCapture Center™ print 
settings  on page 51.)
 If you do...

Chapter 8
46
eDo one of the following:  Press  OK if you do not want to 
change any settings.
 Press  aor b to adjust the effect level 
manually.
Press  OK when you have finished.
fEnter the number of copies you want 
using the dial pad.
gDo one of the following:
 Press  OK and change the print 
settings. (See  PhotoCapture 
Center™ print settings  on page 51.)
 If you do not want to change any 
settings, press  Colour Start to print.
Enhance Scenery8
Enhance Scenery is best used for adjusting...

Printing photos from a memory card or USB Flash memory drive47
8
Note
Press # to try  Remove Red-Eye  once 
again.
 
ePress  OK and enter the number of 
copies you want using the dial pad.
fDo one of the following:
 Press  OK and change the print 
settings. (See PhotoCapture 
Center™ print settings  on page 51.)
 If you do not want to change any 
settings, press Colour Start  to print.
Night Scene8
Night Scene is best used for adjusting night 
view photographs to make them more vivid.
aMake sure you...

Chapter 8
48
cPress  dor c to choose your photo.
Press  OK.
dPress  aor b to choose  Whiteboard .
Press  OK.
ePress  OK and enter the number of 
copies you want using the dial pad.
fDo one of the following:
 Press  OK and change the print 
settings. (See  PhotoCapture 
Center™ print settings  on page 51.)
 If you do not want to change any 
settings, press  Colour Start to print.
Monochrome8
You can convert your photo to monochrome.
aMake sure you have put the memory 
card or USB Flash memory drive in...

Printing photos from a memory card or USB Flash memory drive49
8
Search by Date8
You can find your photos based on date.
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press (PHOTO CAPTURE).
bPress aor b to choose 
Search by Date .
Press  OK.
cPress  aor b to choose the date that you 
want to search from.
Press  OK.
dPress  dor c to choose your photo.
Note
You can view photos with other dates by 
pressing  dor c continuously. Press  d to 
view an older photo and...

Chapter 8
50
Trimming8
You can trim your photo and print a part of the 
image.
Note
If your photo is very small or of irregular 
proportions you may not be able to trim 
the photo. The LCD will show 
Image Too Small.  or 
Image Too Long.
 
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press ( PHOTO CAPTURE ).
bPress aor b to choose  Trimming.
Press  OK.
cPress  dor c to choose your photo.
Press  OK.
dAdjust the red frame around your photo.
The part inside of the...

Printing photos from a memory card or USB Flash memory drive51
8
PhotoCapture Center™ 
print settings
8
You can change the print settings 
temporarily. 
The machine returns to its default settings 
after 3 minutes, or if the Mode Timer returns 
the machine to Fax mode. (See Mode Timer 
on page 4.)
Note
You can save the print settings you use 
most often by setting them as the default. 
(See  Setting your changes as a new 
default  on page 54.)
 
 
1 No. of prints
(For View Photo(s), Search by Date, Slide...

Chapter 8
52
Adjusting Brightness, 
Contrast and Colour8
Brightness8
aPress  aor b to choose  Brightness .
bPress dor c to make a darker or lighter 
print.
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Contrast8
You can choose the contrast setting. 
Increasing the contrast will make an image 
look sharper and more vivid.
aPress aor b to choose  Contrast.
bPress dor c to change the contrast.
Press  OK.
cIf you do not want to change additional 
settings,...

Printing photos from a memory card or USB Flash memory drive53
8
Cropping8
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is On. If you want to print 
the whole image, turn this setting to Off. 
When you set Cropping  to Off, also set 
Borderless  to Off. (See Borderless 
printing  on page 53.)
aPress aor b to choose  Cropping.
bPress dor c to choose  Off (or On).
Press  OK.
cIf you do not want to...

Chapter 8
54
Setting your changes as a 
new default8
You can save the print settings you use most 
often by setting them as the default settings. 
These settings will stay until you change 
them again.
aPress  aor b and  dor c to choose your 
new setting.
Press  OK.
Repeat this step for each setting you 
want to change.
bAfter changing the last setting, press 
a or b to choose  Set New Default .
Press  OK.
cPress  1 to choose  Yes.
dPress Stop/Exit.
Restoring all settings to the 
factory settings8
You...