Home > Brother > Printer > Brother MFC J430W User Manual

Brother MFC J430W User Manual

Here you can view all the pages of manual Brother MFC J430W User Manual. The Brother manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 1

ADVANCED 
USER’S GUIDE
MFC-J425W
MFC-J430W
MFC-J435W
 
Version 0
USA/CAN
 

Page 2

i
Users Guides and where do I find it?
1Visit us at http://solutions.brother.com/.
Which manual?Whats in it?Where is it?
Product Safety GuideRead this Guide first. Please read the Safety 
Instructions before you set up your machine. 
See this Guide for trademarks and legal 
limitations.Printed / In the box
Quick Setup GuideFollow the instructions for setting up your 
machine and installing the drivers and software 
for the operating system and connection type 
you are using.Printed / In the box
Basic...

Page 3

ii
Table of Contents
1 General setup1
IMPORTANT NOTE............................................................................................... 1
Memory storage ..................................................................................................... 1
Volume Settings..................................................................................................... 1
Ring Volume .................................................................................................... 1
Beeper...

Page 4

iii
5 Dialing and storing numbers15
Voice operations .................................................................................................. 15
Tone or Pulse (Canada only)......................................................................... 15
Fax/Tel mode................................................................................................. 15
Caller ID ......................................................................................................... 15
Special line...

Page 5

1
1
1
IMPORTANT NOTE1
In this manual, the LCD messages of the MFC-J430W are used unless specified.
 Most of the illustrations in this User’s Guide show the MFC-J430W.
Memory storage1
Even if there is a power failure, you will not 
lose the settings you have chosen using the 
Menu  key because they are stored 
permanently. Also, you will not lose your 
settings in the  FAX and COPY  mode key 
menus if you have chosen 
Set New Default . You may have to reset 
the date and time.
Volume Settings1
Ring...

Page 6

Chapter 1
2
Beeper Volume1
When the beeper is on, the machine will beep 
when you press a key, make a mistake, or 
after you send or receive a fax.
You can choose a range of beeper volume 
levels, from  High to Off.
aPress Menu.
bPress  aor b to choose 
General Setup .
Press  OK.
cPress  aor b to choose  Volume.
Press  OK.
dPress  aor b to choose  Beeper.
Press  OK.
ePress  aor b to choose Low,  Med, High 
or  Off.
Press  OK.
fPress  Stop/Exit.
Speaker Volume1
You can choose a range of speaker volume...

Page 7

General setup3
1
Automatic Daylight 
Saving Time
1
You can set the machine to change 
automatically for daylight saving time. It will 
reset itself forward one hour in the Spring and 
backward one hour in the Fall. Make sure you 
have set the correct date and time in the 
Date&Time setting.
The factory setting is  Off, so you will have to 
turn on Automatic Daylight Saving Time as 
follows.
aPress  Menu.
bPress  aor b to choose 
General Setup .
Press  OK.
cPress  aor b to choose 
Auto Daylight .
Press...

Page 8

Chapter 1
4
LCD screen1
LCD Contrast1
You can adjust the LCD contrast. If you are 
having difficulty reading the LCD, try 
changing the contrast setting.
aPress  Menu.
bPress  a or  b to choose 
General Setup .
Press  OK.
cPress  a or  b to choose LCD Settings .
Press  OK.
dPress  a or  b to choose LCD Contrast .
Press  OK.
ePress  d to increase the contrast or press 
c  to decrease the contrast.
Press  OK.
fPress  Stop/Exit.
Setting the backlight 
brightness1
You can adjust the brightness of the LCD...

Page 9

General setup5
1
Mode Timer1
The machine has three temporary mode keys 
on the control panel:  FAX, SCAN  and COPY . 
You can change the amount of time the 
machine takes after the last Scan or Copy 
operation before it returns to FAX mode. If 
you choose  Off, the machine stays in the 
mode you used last.
 
aPress  Menu.
bPress  aor b to choose 
General Setup .
Press  OK.
cPress  aor b to choose  Mode Timer .
Press  OK.
dPress  aor b to choose  0Sec, 30Secs, 
1Min,  2Mins,  5Mins or  Off.
Press  OK....

Page 10

6
2
TX Lock2
TX Lock lets you prevent unauthorized 
access to the machine.
While TX Lock is On, the following operations 
are available: Receiving faxes
While TX Lock is On, the following operations 
are NOT available:  Sending faxes
 Copying
 PC printing 
 Scanning
 Operation from the control panel
Note
If you forget the TX Lock password, 
please call Brother Customer Service. 
(uuBasic User’s Guide:  Brother 
numbers )
 
Setting and changing the 
TX Lock password2
Note
If you have already set the...
Start reading Brother MFC J430W User Manual

Related Manuals for Brother MFC J430W User Manual

All Brother manuals