Brother MFC 8890DW User Manual

Chapter 12
80
Improving copy quality12
You can choose from a range of quality 
settings. The default setting is Auto.
„Auto
Auto is the recommended mode for 
ordinary printouts. Suitable for documents 
that contain both text and photographs.
„Text
Suitable for documents containing only 
text.
„Photo
Suitable for copying photographs.
To temporarily change the quality setting, 
follow the steps below:
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies...

Making copies
81
12 Adjusting Contrast and 
Brightness12
Contrast12
Adjust the contrast to help an image look 
sharper and more vivid.
To temporarily change the contrast setting, 
follow the steps below:
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Contrast/Quality.
Press a or b to choose Contrast. 
PressOK.
 
Contrast:-nnonn+c
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Selectdc&OK
01
ePress d or c to increase or decrease the...

Chapter 12
82
Making N in 1 copies 
(page layout)12
You can reduce the amount of paper used 
when copying by using the N in 1 copy 
feature. This allows you to copy two or four 
pages onto one page, which lets you save 
paper.
IMPORTANT
• Please make sure the paper size is set to 
Letter, A4, Legal
1 or Folio1.
•(P) means Portrait and (L) means 
Landscape.
• You cannot use the Enlarge/Reduce 
setting with the N in 1 feature.
1You can choose Legal and Folio for MP Tray only.
 
aMake sure you are in Copy...

Making copies
83
12
If you are copying from the scanner 
glass:
12
Insert your document face down in the 
direction shown below:
„2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
Duplex (2-sided) 
copying 
12
If you want to use the duplex copy feature, 
load your document in the ADF.
If you get an Out of Memory message 
while you are making duplex copies, try 
installing extra memory. (See Out of memory 
message on page 86.)
Duplex Copy 
(long edge flip)12
„1 sided i 2 sided
Portrait
 
Landscape...

Chapter 12
84
„2 sided i 1 sided
Portrait
 
Landscape
 
aMake sure you are in Copy mode  .
bLoad your document.
cEnter the number of copies (up to 99) 
using the dial pad.
dPress Duplex and a or b to select 
1sidedi2sided, 
2sidedi2sided or 
2sidedi1sided.
 
Duplex
aOff
1sidedi2sided
b2sidedi2sided
Selectabor OK
PressOK.
ePress Start to copy the document.
Note
Duplex copy using a 2-sided legal size 
document is not available.
 
Advanced Duplex Copy 
(short edge flip)12
„Advanced 2 sided i 1 sided...

Making copies
85
12
ePress a or b to select 
2sidedi1sided or 
1sidedi2sided.
PressOK.
 
Duplex Advanced
a2sidedi1sided
b1sidedi2sided
Selectabor OK
fPress Start to copy the document.
Note
Duplex copy using a 2-sided legal size 
document is not available.
 
Tray selection12
You can change the Tray Use only for the 
next copy.
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Tray Select.
ePress d or c to choose the MP>T1, 
T1>MP,...

Chapter 12
86
Out of memory 
message
12
If the memory becomes full while you are 
making copies, the LCD message will guide 
you through the next step.
If you get an Out of Memory message 
while scanning a subsequent page, you will 
have the option to press Start to copy the 
pages scanned so far, or to press Stop/Exit 
to cancel the operation.
To gain extra memory, you can do the 
following:
„Print the faxes that are in the memory. 
(See Printing a fax from the memory 
on page 51.)
„You can turn off Fax...

Section IV
Direct printingIV
Printing data from a USB Flash memory drive 
or a digital camera supporting mass storage
88
 

88
13
With the Direct Print feature, you do not need 
a computer to print data. You can print by just 
plugging your USB Flash memory drive into 
the machine’s USB direct interface. You can 
also connect and print directly from a camera 
set to USB mass storage mode.
Note
• Some USB Flash memory drives may not 
work with the machine.
• If your camera is in PictBridge mode, you 
cannot print data. Please refer to the 
documentation supplied with your camera 
to switch from PictBridge mode to mass 
storage...

Printing data from a USB Flash memory drive or a digital camera supporting mass storage
89
13
Printing data directly 
from the USB Flash 
memory drive or a 
digital camera 
supporting mass 
storage
13
aConnect your USB Flash memory drive 
or digital camera to the USB direct 
interface (1) on the front of the machine.
Your machine will enter Direct Print 
mode automatically.
 
 
Note
• If the Direct Print setting of Secure 
Function Lock 2.0 is set to “Disable” for 
all users (including Public mode...