Brother MFC 5460CN User Manual

Section III
CopyIII
Making copies66
 

66
12
How to copy12
Entering Copy mode12
Press (Copy) to enter Copy mode. The 
default setting is Fax. You can change the 
number of seconds or minutes that the machine 
stays in Copy mode. 
(See  Mode Timer on page 23.)
 
The LCD shows the default copy setting:
 
1 Copy Ratio
2Quality
3 No of Copies
4 Paper Size
5 Paper Type
Making a single copy12
aMake sure you are in Copy mode  .
bLoad your document.
cPress Black Start  or Color  Start .
Making multiple copies12
aMake sure you are in Copy mode  ....

Making copies67
12
Copy keys12
When you want to quickly change the copy 
settings temporarily  for the next copy, use the 
Copy keys. 
(For MFC-5460CN)
 
(For MFC-5860CN)
 
The machine returns to its default settings 60 
seconds after it finishes copying, or if the 
mode timer returns the machine to Fax mode. 
For more information see  Mode 
Timer on page 23.
Changing copy quality12
You can choose from a range of quality 
settings. The default setting is  Normal. To 
temporarily  change the quality...

Chapter 12
68
Enlarging or reducing the 
image copied12
You can choose the following enlargement or 
reduction ratios:
Custom(25-400%)  allows you to enter a 
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the 
instruction below:
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress  Enlarge/Reduce .
eChoose one of the options below:
„ Use  a or  b to choose the 
enlargement or reduction ratio you 
want. Press  OK....

Making copies69
12
Copy options12
When you want to quickly change the copy 
settings temporarily  for the next copy, use the 
Options  key. 
Note
You can save the copy settings you use 
most often by setting them as  default. You 
can find instructions on how to do this in 
the section for each feature. 
 
Making N in 1 copies or a poster12
The N in 1 copy feature can help you save 
paper by letting you copy two or four pages 
onto one printed page. 
You can also produce a poster. When you 
use the...

Chapter 12
70
gAfter the machine scans the page, 
press  1 to scan the next page.
 
Next Page?
1.Yes 2.No
hPlace the next document on the scanner 
glass. Press  OK.
Repeat steps g and  h for each page of 
the layout.
 
Set Next Page
Then Press OK
iAfter all the pages have been scanned, 
press  2 in step g to finish.
Note
If photo paper is chosen as the paper type 
setting for N in 1 copies,  the images will 
be printed as if plain paper had been 
chosen.
 
Place your document face down in the 
direction...

Making copies71
12
Adjusting Brightness12
To temporarily change the brightness setting, 
follow the instruction below:
aMake sure you are in Copy mode  . 
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Options  and a or  b to choose 
Brightness .
Press  OK.
 
Brightness
-nnonn +    e
ePress  a or  b to make the copy lighter 
or darker. Press  OK.
fPress  Black Start  or Color  Start .
To change the default setting follow the 
instructions below:
aPress  Menu, 3,...

Chapter 12
72
Paper options12
(MFC-5860CN only)
If both trays are set to the same size and type 
of paper,  Auto will let your machine take from 
Tray#1 first, then take from Tray#2 if Tray#1 
runs out of paper.
Paper type12
If you are copying on special paper, be sure 
to choose the type of paper you are using so 
you will get the best print quality.
aMake sure you are in Copy mode  . 
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
d(MFC-5460CN)
Press  Paper Type ....

Section IV
Walk-up Photo PrintingIV
PhotoCapture Center®74
PictBridge83
 

74
13
PhotoCapture Center® 
Operations
13
Printing from a media card 
without a PC13
Even if your machine is not connected to your 
computer, you can print photos directly from 
digital camera media. (See  How to print from 
a media card on page 76.)
Scanning to a media card 
without a PC13
You can scan documents and save them 
directly to a media card. 
See Scan to Card on page 81.
Using PhotoCapture Center® 
from your computer13
You can access the media card that is in the 
media drive (slot) of the...