Brother MFC 215 User Manual

APPENDIX B   B - 9
5.LAN
(MFC-425CN 
only) 1
.Setup 
TCP/IP 1
.BOOT 
Method Auto
Static
RARP
BOOTP
DHCP You can choose the 
BOOT method that 
best suits you needs.
See 
Network 
User’s 
Guide 
on the 
CD-ROM
2
.IP Address [000-255].
[000-255].
[000-255].
[000-255]  Enter the IP address.
3 .Subnet 
Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet 
mask.
4 .Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the Gateway 
address.
5 .Node Name BRN_XXXXXX Enter the Node name.
6 .WINS...

B - 10   APPENDIX B
5.LAN
(MFC-425CN 
only) 
(Continued) 2
.Setup 
Misc. 1
.Ethernet Auto
100B-FD
100B-HD
10B-FD
10B-HD Selects Ethernet link 
mode.See 
Network 
User’s 
Guide 
on the 
CD-ROM
2
.Time Zone GMT+0:00 Sets the time zone 
for your country.
0 .Factory 
Reset — — Restore all network 
settings to factory 
default.
5 .Print 
Reports
(MFC-215C 
only)
6 .Print 
Reports
(MFC-425CN 
only) 1
.XMIT 
Verify — — You can print these 
lists and reports.7-3
2 .Help List ——
3 .Quick-Dial ——
4 .Fax 
Journal...

APPENDIX B   B - 11
Entering Text
When you are setting certain menu selections, such as the Station 
ID, you may need to type text into the machine. Most number keys 
have three or four letters printed above them. The keys for 
0, # and 
 do not have printed letters because they are used for special 
characters.
By pressing the appropriate number key repeatedly, you can access 
the character you want.
Inserting spaces
To enter a space in the fax number, press   once between 
numbers. To enter a space in...

B - 12   APPENDIX B
Special characters and symbols 
Press , # or 0, and then press   or   to move the cursor under 
the special character or symbol you want. Then press 
Menu/Set to 
select it.
Press  for (space) !  # $ % & ’ ( )   + , - . / 
Press 
#for : ; < = > ? @ [ ] ^ _
Press 
0for Ä Ë Ö Ü À Ç È É 0
▲▲
 

GLOSSARY   G - 1
G
ADF (automatic document feeder) (MFC-425CN only)  
The document can be placed in the ADF and scanned one page 
at a time automatically.
Auto Reduction   Reduces the size of incoming faxes.
Automatic fax transmission   Sending a fax without picking up the 
handset of an external phone.
Automatic Redial   A feature that enables your machine to redial the 
last fax number after five minutes if the fax did not go through 
because the line was busy.
Backup Print   Your machine prints a copy...

G - 2   GLOSSARY
Communication error (or Comm. Error)   An error during fax 
sending or receiving, usually caused by line noise or static.
Compatibility group   The ability of one fax unit to communicate 
with another. Compatibility is assured between ITU-T Groups.
Contrast   Setting to compensate for dark or light documents, by 
making faxes or copies of dark documents lighter and light 
documents darker.
Colour Enhancement (MFC-425CN only)   Adjusts the colour in the 
image for better print quality by...

GLOSSARY   G - 3
Fax tones  The signals sent by sending and receiving fax machines 
while communicating information.
Fax/Tel   You can receive faxes and telephone calls. Do not use this 
mode if you are using a telephone answering device (TAD).
Fine resolution   Resolution is 203 x 196 dpi. It is used for small print 
and graphs.
Grey scale   The shades of gray available for copying and faxing 
photographs.
Group number   A combination of Speed-Dial numbers that are 
stored in a Speed-Dial location for...

G - 4   GLOSSARY
PhotoCapture Center™   Allows you to print digital photos from your 
digital camera at high resolution for photo quality printing or to 
scan documents to a media card.
Photo resolution   A resolution setting that uses varying shades of 
gray for the best representation of photographs.
Polling (MFC-425CN only)   The process of a fax machine calling 
another fax machine to retrieve waiting fax messages.
Pulse    A form of rotary dialling on a telephone line.
Quick Dial List   A listing of...

GLOSSARY   G - 5
Mono Start or Colour Start to start the dialling process.
Standard resolution   203 x 97 dpi. It is used for regular size text 
and quickest transmission.
Station ID   The stored information that appears on the top of faxed 
pages. It includes the sender’s name and fax number.
Super Fine resolution   392 x 203 dpi. Best for very small print and 
line art.
TAD (telephone answering device)   You can connect an external 
TAD to your machine.
Temporary settings   You can select certain...

S - 1   SPECIFICATIONS
S
Product description
General
Specifications
Memory Capacity
ADF (Automatic Document 
Feeder)
8 MB (MFC-215C)
16 MB (MFC-425CN)
Up to 10 pages
(MFC-425CN only)
Paper Tray 100 Sheets (80 g/m2)
Printer Type Ink Jet
Print Method Piezo with 74 × 5 nozzles
LCD (Liquid Crystal 
Display) 16 characters 
× 1 line (MFC-215C)
16 characters  × 2 lines (MFC-425CN)
Power Source 220 - 240V 50/60Hz
Power Consumption (MFC-215C)
Power Save 
Mode:
Standby:
Operating:Average 3 w
Average 7 w
Average 16...