Brother Hl4570cdw Owners Manual

Control Panel 
75
3
HP LaserJet Font No. I000.../I059*.../I071
Font Pitch 0.44/10*.../99.99
Font Point 4.00/12*.../999.75
Symbol SetPC-8*... Sets the symbol set or the character 
set.
Table PrintPrints code table. 
If Change Emulation appears on 
the LCD, choose Auto or 
HP LaserJet in Emulation of 
Print Menu.
(See page 74.)
Auto LFOff*/OnON: CR i CR+LF, OFF: CR i CR
Auto CROff*/OnON: LF i LF+CR, FF i FF+CR, or 
VT i VT+CR 
OFF: LF i LF, FF i FF, or VT i VT
Auto WRAPOff*/OnChooses whether a line feed...

Control Panel 
76
3
Network for HL-4150CDN users3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static you will need to manually 
enter an IP address from the...

Control Panel 
77
3
Network for HL-4570CDW(T) users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN TCP/IP Boot MethodAuto*/Static/RARP/
BOOTP/DHCP Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/1/2/3*.../32767Specifies the number of setting 
trials when...

Control Panel 
78
3
WLAN TCP/IP Boot MethodAuto*/Static/RARP/
BOOTP/DHCP Chooses the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/1/2/3*.../32767Specifies the number of setting 
trials when the Boot Method 
allows automatic IP setting.
APIPAOn*/OffAutomatically allocates the IP...

Control Panel 
79
3
1### means a number within the range of 000 to 255. On connection to the network, if the machines Boot Method is Auto the machine will attempt 
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA 
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the Boot Method of the machine is set to Static you will need to manually 
enter an IP address from the machines control panel.
Reset...

Control Panel 
80
3
Color Correction3
Submenu Menu Selections Options Descriptions
FrequencyNormal*/Low/OffSets the interval time you want to 
carry out the auto color correction
ColorCalibration CalibrateCarries out calibration to revise the 
colors. (See Color Calibration 
on page 83.)
ResetSets the calibration parameters back 
to the default settings. (See Color 
Calibration on page 83.)
Auto Regist. RegistrationAdjusts the print position of each 
color automatically. (See Auto 
Registration on page...

Control Panel 
81
3
Direct Print3
Submenu Menu Selections Options Descriptions
Paper SizeLetter*/Legal/A4/
Executive/JIS B5/B5/
A5/A5 L/JIS B6/B6/A6/
Folio Sets the size of paper for direct print.
Media TypePlain Paper*/
Thick Paper/
Thicker Paper/
Thin Paper/
Recycled Paper/
Bond Paper/
Glossy Paper Sets the type of paper for direct print.
Multiple Page1in1*/2in1/4in1/9in1/
16in1/25in1/
1 in 2x2 pages/
1 in 3x3 pages/
1 in 4x4 pages/
1 in 5x5 pages Sets the pattern if you want to print 
multiple pages...

Control Panel 
82
3
Default settings3
The machine has three levels of default settings; the default settings have been set at the factory before 
shipment (see Menu table on page 71).
Network default settings
Factory reset
Settings reset
Note
• You cannot modify the preset default settings.
• Page counter can never be changed.
 
Network default settings3
If you want to reset only the print server back to its default settings (by resetting all network information such 
as the password and IP address),...

Control Panel 
83
3
Color Calibration3
The output density for each color may vary depending on the environment the machine is in, such as 
temperature and humidity. Calibration helps you to improve the color density.
Note
If you print using the Windows® printer driver, the driver will get the calibration data automatically if both 
Use Calibration Data and Get Device Data Automatically are on. The default settings are on. See 
Color Calibration on page 39.
If you print using the Macintosh printer driver,...

Control Panel 
84
3
Manual Registration3
When you manually set the color registration, you need to print the color registration chart. Then you are 
required to set parameters to the machine in accordance with the instruction of the color registration chart.
Print Chart3
You can print the color registration chart to manually check the registration of the colors.
aPress + or - to choose Color Correction. Press OK.
bPress + or - to choose Manual Regist.. Press OK.
cPress + or - to choose Print Chart. Press...