Brother Hl4570cdw Owners Manual

Control Panel 
65
3
Cancel3
You can cancel the processing or printing of data by pressing Cancel. The LCD shows Cancel printing. 
until the job is canceled. To delete all jobs, press Cancel for about 4 seconds until the LCD shows 
Job Cancel (All) and then release it.
After canceling the job, the machine returns to the Ready state.
Pressing Cancel will exit the control panel menu and return the machine to the Ready state.
Secure3
If you want to print secure data protected by a password, press Secure. For...

Control Panel 
66
3
LEDs3
The LEDs are lights which show the machine status.
Data LED (Green)
3
Error LED (Orange)3
LED indicationMeaning
OnData is in the machine memory.
BlinkingReceiving or processing data.
OffNo remaining data in the memory.
LED indicationMeaning
BlinkingThere is a problem with the machine.
OffThere is no problem with the machine. 

Control Panel 
67
3
LCD3
The LCD shows the current machine status. When you use the buttons on the control panel, the LCD will 
change.
If there are any problems, the LCD will show the error message, maintenance message, or call service 
message so you will know that you need to take action. (For more information about these messages, see 
LCD messages on page 141.)
Back light3
LCD messages3
The message on the LCD shows the current machine status during normal operation.
 
Ready
KoYoMnCo
The o and n...

Control Panel 
68
3
Machine status messages3
The following table shows the machine status messages during normal operation: 
1(HL-4570CDW(T) only) When the Wireless Network is enabled the machine does not transfer to Deep Sleep mode. If you want to disable the 
Wireless Network, change setting of the WLAN Enable to Off. (See Network for HL-4570CDW(T) users on page 77.)
Machine Status MessageMeaning
Cooling DownThe machine is cooling down.
Job Cancel
Job Cancel (All)Canceling the job.
Ignore DataMachine...

Control Panel 
69
3
Reprinting documents3
Reprinting the last job3
You can reprint the data from the last print job without sending it from the computer again.
Note
• The Reprint function is not available when Secure Function Lock 2.0 is On. For more information about 
Secure Function Lock 2.0, see the Chapter 6 of the Network Users Guide.
• If the machine does not have enough memory to spool the print job data, it will not print the document.
• If you wait 30 seconds to continue the control panel...

Control Panel 
70
3
Printing Secure data3
Secure data3
Secure documents are protected by a password and only those people who know the password will be able 
to print the document. The machine will not print the document when you send it for printing. To print the 
document, you must use the control panel of the machine (with the password). Secure data will be deleted 
after it is printed once.
When the area to spool data is full, the LCD shows Out of Memory. Press Cancel to return to the Ready 
state....

Control Panel 
71
3
Menu table3
There are eight menus. For more information about the selections available in each menu, see the tables 
below.
If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready.
Note
The control panel LCD names for the paper trays are as follows.
• Standard paper tray: Tray1
• Multi-purpose tray: MP
• Optional lower tray: Tray2
 
Machine Info.
Submenu Menu Selections Options Descriptions
Print SettingsPrints the Printer Settings page....

Control Panel 
72
3
Paper Tray3
Drum CountShows the current total pages printed for the drum 
unit.
Parts Life Drum LifeShows the remaining life for the drum unit.
Belt LifeShows the remaining life for the belt unit.
PF KitMP LifeShows the pages left to print with the PF kit MP.
PF Kit1 LifeShows the pages left to print with the PF kit 1.
PF Kit2 LifeShows the pages left to print with the PF kit 2.
Fuser LifeShows the pages left to print with the fuser unit.
Laser LifeShows the pages left to print with...

Control Panel 
73
3
General Setup3
Submenu Menu Selections Options Descriptions
Local LanguageEnglish*/Français... Changes the LCD language for your 
country.
Ecology Sleep Time 0/1/2/3*/4/5...MinSets the time to return to Power Save 
mode.
Toner SaveOff*/OnIncreases the page yield of the toner 
cartridge.
Panel Control Button Repeat0.1*/0.4/0.6/0.8/1.0/
1.4/1.8/2.0 Sec Sets the time for the LCD message to 
change when holding + or - at 
intervals.
Message Scroll
Level 1*/Level 2.../Level 10Sets the time...

Control Panel 
74
3
Print Menu
Submenu Menu Selections Options Descriptions
EmulationAuto*/HP LaserJet/
BR-Script 3 Chooses the emulation mode you 
use.
If you choose Auto, the machine can 
change the emulation mode 
automatically.
If you choose an option other than 
Auto, each emulation mode will be 
fixed.
Auto ContinueOff*/OnChooses whether to automatically 
clear the removable error.
Output ColorAuto*/Color/MonoSets the output color.
Media TypePlain Paper*/
Thick Paper/
Thicker Paper/
Thin Paper/...