Brother Hl2280dw Owners Manual

							Menu and features
77
C
1.General 
Setup
(Continued)2.Ecology
(Continued)2.Sleep 
Time— Range varies 
depending on 
models.
003Min*Conserves power.
See1.
3.LCD 
Contrast——-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjusts the contrast 
of the LCD.
4.Replace 
Toner——Continue
Stop*The machine will 
stop printing until you 
replace the toner 
cartridge.
5.Reset
(For 
DCP-7060D)1.All 
Settings—a Reset
b ExitRestores the 
machines settings to 
the original factory 
default settings.73
5.Reset
(For 
DCP-7065DN 
and 
HL-2280DW)1.Network—a Reset
b ExitRestores the 
machines network 
settings to the 
original factory 
default settings.
2.All 
Settings—a Reset
b ExitRestores all the 
machines settings to 
the original factory 
default settings.
0.Local 
Language— (Choose your 
language)— Allows you to change 
the LCD language for 
your country.See 
2.
Level 1 Level 2 Level 3 Options Descriptions Page
2.Copy 1.Quality—Auto*
Text
Photo
GraphYou can choose the 
Copy resolution for 
your type of 
document.See
1.
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Level 4 Options Descriptions Page
1See Advanced Users Guide.
2See Quick Setup Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							78
2.Copy
(Continued)2.Brightness—-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjust the brightness 
for copies.See1.
3.Contrast—-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjusts the contrast 
for copies.
Level 1 Level 2 Level 3 Options Descriptions Page
3.Printer
(For HL-2280DW)1.Print 
Options1.Internal 
Font— Prints a list of the 
machine’s internal 
fonts.See
2.
2.
Configuration— Prints a list of the 
machine’s printer 
settings.
3.Test Print— Prints a test page.
2.Duplex—Off*
On(Long Edge)
On(Short Edge)Enables or disables 
duplex printing. You 
can also choose long 
edge or short edge 
duplex printing.
3.Reset 
Printer—a Reset
b ExitRestores the printer 
settings to the original 
factory default 
settings.
1See Advanced Users Guide.
2See Software Users Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Options Descriptions Page
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							Menu and features
79
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
3.Network
(For DCP-7065DN)
1.TCP/IP 1.Boot 
Method—Auto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node Name—BRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
Config—Auto*
StaticChooses the WINS 
configuration mode.
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							80
3.Network
(For DCP-7065DN)
(Continued)1.TCP/IP
(Continued)7.WINS 
Server—Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS Server—Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA—On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6—On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
2.Ethernet——Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode.
3.Status——Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFFShows the Ethernet 
link status.
4.MAC 
Address— — — Shows the MAC 
address of the 
machine.
0.Network 
Reset—a Reset
b ExitReboot OK?
a Yes b NoRestore all network 
settings to factory 
default. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							Menu and features
81
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
4.Network
(For HL-2280DW)
1.Wired LAN 1.TCP/IP 1.Boot 
MethodAuto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
ConfigAuto*
StaticChooses the WINS 
configuration mode.
7.WINS 
ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							82
4.Network
(For HL-2280DW)
(Continued)1.Wired LAN
(Continued)2.Ethernet—Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode.
3.Wired 
Status—Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFFYou can see the 
current wired status.
4.MAC 
Address— — Shows the MAC 
address of the 
machine.
5.Set to 
Default—a Reset
b ExitRestore the wired 
network setting to 
factory default.
6.Wired 
Enable—On*
OffEnable or Disable the 
Wired LAN manually.
2.WLAN 1.TCP/IP 1.Boot 
MethodAuto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRWXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
ConfigAuto*
StaticChooses the WINS 
configuration mode. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							Menu and features
83
C
4.Network
(For HL-2280DW)
(Continued)2.WLAN
(Continued)1.TCP/IP
(Continued)7.WINS 
ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
2.Setup 
Wizard— — You can configure 
your print server.
3.WPS/AOSS— — You can easily 
configure your 
wireless network 
settings using the 
one-button push 
method.
4.WPS w/PIN 
Code— — You can easily 
configure your 
wireless network 
settings using WPS 
with a PIN code. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							84
4.Network
(For HL-2280DW)
(Continued)2.WLAN
(Continued)5.WLAN 
Status1.StatusActive(11b)
Active(11g)
Wired LAN 
Active
WLAN OFF
AOSS Active
Connection FailYou can see the 
current wireless 
network status.
2.SignalStrong
Medium
Weak
NoneYou can see the 
current wireless 
network signal 
strength.
3.SSID— You can see the 
current SSID.
4.Comm. ModeAd-hoc
InfrastructureYou can see the 
current 
Communication 
Mode.
6.MAC 
Address— — Shows the MAC 
address of the 
machine.
7.Set to 
Default—a Reset
b ExitRestore the wireless 
network settings to 
factory default.
8.WLAN 
Enable—1.On
2.Off*Enable or disable the 
wireless LAN 
manually.
0.Network 
Reset—a Reset
b ExitReboot OK?
a Yes b NoRestores all network 
settings to factory 
default. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							Menu and features
85
C
Level 1 Level 2 Level 3 Options Descriptions Page
3.Machine Info.
(For DCP-7060D)
4.Machine Info.
(For DCP-7065DN)
5.Machine Info.
(For HL-2280DW)1.Serial No.— — You can check the 
serial number of your 
machine.73
2.Page Counter—Total
List
Copy
PrintYou can check the 
number of total 
pages the machine 
has printed during its 
life.See
1.
3.User 
Settings——
4.Network 
Config
(For DCP-7065DN 
and HL-2280DW)——
5.WLAN Report
(For HL-2280DW)——
4.Drum Life
(For DCP-7060D)
5.Drum Life
(For DCP-7065DN)
6.Drum Life
(For HL-2280DW)— — You can check the 
percentage of a 
Drum life that 
remains available.
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk. 
						

							86
D
GeneralD
Note
This chapter provides a summary of the machines’ specifications. For additional specifications 
visit http://www.brother.com/
 for details.
 
SpecificationsD
Printer TypeLaser
Print MethodElectrophotography by semiconductor laser beam scanning
Memory Capacity32 MB
LCD (liquid crystal 
display)16 characters  2 lines
Power Source110 - 120 V AC 50/60 Hz
Power Consumption
1Peak: 1080 W
Copying:
2Approx. 445 W at 25C (77F)
Ready: Approx. 55 W at 25C (77F)
For Wireless models
(WLAN: On) Sleep: Approx. 2.8 W
(WLAN: Off) Deep Sleep: Approx. 1.0 W
For non-Wireless models
Deep Sleep: Approx. 0.9 W
Note
All figures stated above (except Peak) are average figures.
 
1USB connected to PC
2When making a copy from one sheet