Brother Hl 4200cn User Manual

 x
International ENERGY STAR® Compliance Statement
The purpose of the International ENERGY STAR® Program is to promote the development and popularization of 
energy-efficient office equipment.
As an E
NERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY STAR® 
guidelines for energy efficiency.
Laser Notices
Laser Safety (120 V Model Only)
This printer is certified as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) 
Radiation...

 xi   
For Finland and Sweden
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän 
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. 
Varning - Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren utsättas 
för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Internal laser radiation
Max. Radiation Power  10 mW/ch
Wave Length 770 nm-808...

 xii
Wiring Information (For U.K. only)
Important
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as the 
original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with the following code:
Green and Yellow:  Earth
Blue: Neutral
Brown: Live
If in any doubt, call a qualified electrician.
 

 xiii   
EC Declaration of Conformity under the R & TTE Directive
Manufacturer
Brother Industries Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan
Herewith declare that:
Product description : Laser Printer
Product Name : HL-4200CN
is in conformity with provisions of the R & TTE Directive (1999/5/EEC 2002) and we declare compliance with the 
following standards:
R&TTE : EN300330-2 V1.1.1
 EN301489-3 V1.3.1
 CE0682
Safety: EN60950:2000
EMC : EN55022:1998 Class B
 EN55024:1998
   EN61000-3-2:1995...

 xiv
Introduction
Thank you for purchasing the HL-4200CN. This guide contains important information about the printer operation 
and precautions to be followed. To help you use it efficiently, please read this guide before using your new printer.
Furthermore, after you read the guide, store it in a safe place. It will be useful in case you forget how to perform 
operations or if a problem occurs with the printer.
This guide is written for users who are familiar with the personal computers, operating...

 xv   
How to Use This Guide
Conventions
The following conventions and symbols are used in this User’s Guide:
Conventions and Symbols used in this User’s Guide
Example Meaning
Alerts you to an important operating procedure that should be performed with care. 
Make sure that you read these items.
Notes provide you with useful information.
see List of Menu Items on 
page 4-6A cross reference to another section in this User’s Guide. If you are reading the 
Adobe Acrobat PDF file on screen, you can click on...

 xvi
Safety Precautions
To ensure the safe operation of your printer, make sure that you read this section thoroughly before use.
This section describes the conventions used in the guide.
Installing and Relocating your Printer
Do not place the printer in a hot, humid, dusty, or poorly ventilated environment. Prolonged 
exposure to such adverse conditions can cause fire or electric shocks.
Do not place the printer near heaters or volatile, flammable, or combustible materials, such 
as curtains.
Place the...

 xvii   
To lift the printer, face the front of the printer and grip the recessed areas at the bottom left 
and right with both hands. Never try to lift the printer by gripping any other areas. Lifting the 
printer by gripping other areas can cause the printer to fall, resulting in injuries.
When lifting the printer, get a firm footing and bend your knees to avoid possible injuries to 
your back.
The printer has ventilation grills on the side and at the back of the machine. Ensure that the 
printer is...

 xviii
■Use the printer in a place that meets the following requirements: 
Ambient temperature range of 10 to 32 °C (50.0 to 89.6 °F), relative humidity of 15 to 85% (no 
condensation) 
When using the printer at an ambient temperature of 32 °C (89.6 °F), the relative humidity should not 
exceed 65%. When the relative humidity reaches 85%, the ambient temperature should not exceed 
28 °C (82.4 °F).
■Do not place the printer in a room where there are sudden fluctuations in temperature 
and do not move the...

 xix   
In the following situations, stop using the printer immediately, turn it off, and disconnect the 
power cord from the AC power outlet/socket. After that, call your dealer or Brother 
Customer Service immediately. Continued use of the printer in such situations could result 
in fire:
■There is smoke emanating from the printer or the outside of the printer is excessively 
hot.
■Unusual noises are coming from the printer.
■There is water inside the printer.
To prevent fire or electric shocks,...