Brother Hl 4040cn User Manual

Control  Panel
82
4
1On conne ctio n to the  ne two rk, if the  machine s BOOT Metho d is Auto  the  ma chine  will a tte mpt to a utomatically  set the  IP address and Subnet 
Ma sk from a  bo o t serv e r such a s DHCP or BOOTP. If a  boo t serve r canno t be found, an APIPA IP address will be allocated, such as 169. 254. 
[001-254]. [000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine s co ntrol 
panel.
BR-Script
(HL-4050CDN/...

Control  Panel
83
4
LAN for HL-4070CDW users
Submenu 1Submenu 2Menu SelectionsOptionsDescriptions
Wired TCP/IP BOOT MethodAuto*/Static/RARP/BOOTP
/DHCPChoose the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*Enter the Gateway address.
IP Boot Tries # (3*)
APIPAOn*/OffAutomatically allocates the IP 
address from the link-local...

Control  Panel
84
4
1On conne ctio n to the  netwo rk, if the  machine s IP METHOD is AUTO the ma chine will a tte mpt to automa tica lly  set the IP a ddress and Subnet 
Ma sk from a  bo o t serv e r such a s DHCP or BOOTP. If a  boo t serve r canno t be found an APIPA IP address will be allocated, such as 
169.254.[001-254].[000-255]. If the IP METHOD of the ma chine is set to STATIC y ou will ne ed to  manua lly enter an IP address from the  
m a ch in e  s co nt ro l  pa ne l.
WLAN  
StatusStatus...

Control  Panel
85
4
Manual Regist. Print ChartPrints the chart to manually check 
the registration of the colours.
Set Registration 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow RightEnter the correction value on the 
chart you printed from the Print 
Chart.
Direct Print
SubmenuMenu SelectionsOptionsDescriptions
Paper Size Letter/Legal/A4*/ 
Executive/JIS B5/B5/A5/
B6/A6/A4Long/FolioSets the size of paper for direct print....

Control  Panel
86
4
PictBridge
SubmenuMenu SelectionsOptionsDescriptions
Paper Size Letter/A4*/B5/A5/B6/A6Sets the size of paper for PictBridge.
Orientation
Portrait*/Landscape

Portrait/Landscape*This printer can print pages in portrait 
or landscape orientation for 
PictBridge.
Date&TimeOff*/OnPrints the date and time.
File NameOff*/OnPrints the file name.
Print QualityNormal*/Fine
 The default settings are shown in Bold with an asterisk.
 

Control  Panel
87
4
Example of changing a menu setting4
Setting IP address
aPress the + or - button to choose LAN (and to display each setting shown below). 
Select ab or OK
Machine Info.
h
 
Select ab or OK
LAN
bPress OK. 
LAN
TCP / IP
cPress OK. 
TCP / IP
BOOT Method
dPress the - button. 
TCP / IP
IP Address
ePress OK.
The last digit in the first part of the number is blinking.
 
IP Address
192.0.0.192
fPress the + or - button to increase or decrease the number.
Press OK to go to the next number. 
 
IP...

Control  Panel
88
4
Default settings4
The printer settings have been set at the factory before shipment. They are called default settings (see Menu 
tableon page 77). Although you can run the printer with these default settings unchanged, you can tailor the 
printer with user settings.
Note
Changing the user settings does not affect the default settings. You cannot modify the preset default 
settings.
 
The changed user settings can be restored to the default settings with the Reset Menu. See Menu...

Control  Panel
89
4
Calibration4
The output density for each colour may vary depending on the environment the machine is in such as 
temperature and humidity. Calibration helps you to improve the colour density.
aPress the + or - key to choose Color Correction. Press OK. 
Select ab or OK
Machine Info.
h
 
Select ab or OK
Color Correction
bPress OK. 
Color Correction
ColorCalibration
cPress OK. 
ColorCalibration
Calibrate
dPress OK again. 
Calibrate
OK?
You can reset the calibration parameters back to...

Control  Panel
90
4
Auto Registration4
Registration4
You can adjust the print position of each colour automatically.
aPress the + or - key to choose Color Correction. Press OK. 
Select ab or OK
Machine Info.
h
 
Select ab or OK
Color Correction
bPress the + or - key to choose Auto Regist.. Press OK. 
Color Correction
Auto Regist.
cPress OK. 
Auto Regist.
Registration
dPress OK again. 
Registration
OK?
Frequency4
You can set how often the auto registration occurs.
aPress the + or - key to choose Color...

Control  Panel
91
4
Manual Registration4
Print Chart4
You can print the colour registration chart to manually check the registration of the colours.
aPress the + or - key to choose Color Correction. Press OK. 
Select ab or OK
Machine Info.
h
 
Select ab or OK
Color Correction
bPress the + or - key to choose Manual Regist.. Press OK. 
Color Correction
Manual Regist.
cPress OK. 
Manual Regist.
Print Chart
Set Registration4
You can correct the colour registration manually.
aPress the + or - key to choose...