Brother HL 2035R User Manual

Driver and software
24
3
„Print Setting
You can manually change the Print setting.
•Auto
Selecting the Auto button will allow automatic printing with the most suitable print settings for your print 
job.
•Manual
You can change the settings manually by selecting the Manual button and clicking the Setting... button.
For Windows
® 98/Me users: brightness, contrast and other settings.
For Windows
® 2000/XP, Windows Vista® users: Printer Halftone, System Halftone, Improve gray 
printing.
Duplex Printing3...

Driver and software
25
3
Device Options3
 
You can set the following Printer Function modes in this tab:
(You can jump to the page for each Printer Function by clicking the function name in the list below.)
„Job Spooling
„Quick Print Setup
„Sleep Time
„Status Monitor
„Administrator (For Windows
® 98/Me users only)
„Page Protection
„Print Date & Time
„Density adjustment
„Error Message Printout
Note
The Printer Function list may differ depending on the model.
 
 

Driver and software26
3
„Job Spooling
The printer saves data that you want to reprint.
You can reprint a document without sending the data  again from your PC. To reprint press and hold down 
the  Go button for about 4 seconds until al l the LEDs light up in order (Toner, Drum , Error , Ready ).
Note
• Reprint  function is not available for multiple copies.
• If you want to prevent other people from printing your data using the Reprint function, clear the  Use 
Reprint  check box in the job spooling...

Driver and software
27
3
„Administrator (For Windows® 98/Me users only)
Administrators have the authority to limit the Number of copies, Scaling setting and Watermark setting 
functions.
• Password
Enter the password into this box.
•Set Password
Click here to change the password.
•COPY LOCK
Lock the copy pages selection to prevent multiple copy printing.
• WATERMARK LOCK
Lock the current settings of the Watermark option to prevent changes being made.
• SCALING LOCK
Lock the scaling setting as shown...

Driver and software
28
3
Tray Settings tab 3
„Paper Source Setting  (1) 
This feature recognizes the paper size  in each paper tray.
 
Support tab3
Note
If you are using Windows
® 2000, XP or  Windows Vista®, you can access the Support tab by clicking 
Printing Preferences... in the General tab of the Printer Properties screen.
 
„You can download the latest driver or get other product information by accessing the Brother Solutions 
Center at http://solutions.brother.com
„You can see the printer driver...

Driver and software
29
3
For Macintosh®3
This printer supports Mac OS® 9.1 to 9.2 and Mac OS® X 10.2.4 or greater.
You can download the latest printer driver by accessing the Brother Solutions Center at 
http://solutions.brother.com
Note
The screens in this section are from Mac OS
® X 10.3. 
The screens on your Macintosh
® will vary depending on your Operating System.
 
Page Setup3
You can set the Paper Size, Orientation and Scale.
 
Print3
Layout3
Set the Pages per Sheet, Layout direction and Border....

Driver and software
30
3
Print settings3
Set the Resolution, Media Type, Toner Save and other settings.
 
You can change settings by selecting the setting in the Printer Settings list:
„Quality
You can change the resolution as follows:
• 300 dpi
• 600 dpi
• HQ 1200
„Media Type
You can change the media type as follows:
•Plain Paper
• Recycled Paper
• Thick Paper
• Transparencies
• Thicker Paper
• Thin Paper
• Bond Paper
• Envelopes
• Env.Thin
• Env.Thick
„Toner Save Mode
You can save running costs by...

Driver and software
31
3
Uninstalling the printer driver3
You can uninstall the printer driver that you installed with the following steps.
Note
• This instruction is not available if you installed the printer driver from Windows Add Printer function.
• After uninstalling, we recommend that you restart your PC to remove files that were in use during uninstall.
 
Printer driver for Windows®3
For Windows® 98/Me and Windows® 20003
aClick Start and select your appropriate printer from Programs.
bSelect...

Driver and software
32
3
For Mac OS® X 10.2.4 or greater3
aDisconnect the USB cable between the Macintosh and your printer.
bRestart the Mac.
cLog on as an Administrator.
dRun the Print Center (from the Go menu > Applications > Utilities > Print Center folder), then choose 
the printer you want to remove and remove it by clicking the Delete button.
eClick on the name of your printer in the printer list. From the Finder menu, delete the Printer.
fDrag the HL-MFLPro folder (from the Mac OS X 10.X > Library...

33
4
4
LEDs (Light Emitting Diodes)4
This section refers to the four Light Emitting Diodes (LEDs) (Toner, Drum, Error, Ready) and a control panel 
button (Go) on the control panel.
 
The LED indications shown in the table below are used in the illustrations in this chapter.
Note
When the power switch is off or the printer is in Sleep mode, all the LEDs are off.
 
Control panel4
LED is off.
 or   or LED is on.
  or  or LED is blinking.