Brother DCP 8085DN User Manual

58
16 Never push objects of any kind into this product through cabinet slots, since they may touch 
dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never 
spill liquid of any kind on the product. DO NOT attempt to service this product yourself because 
opening or removing covers may expose you to dangerous voltage points and other risks and 
may void your warranty. Refer all servicing to a Brother Authorized Service Center. For the 
location of your nearest...

Safety and legal
59
A Federal Communications Commission (FCC) Declaration of 
Conformity (USA only)A
declares, that the products
Product Name: DCP-8080DN and DCP-8085DN
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a...

60
Laser safetyA
This equipment is certified as a Class 1 laser product as defined in IEC 60825-1+A2: 2001 
specifications under the U.S. Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This 
means that the equipment does not produce hazardous laser radiation.
Since radiation emitted inside the equipment is completely confined within protective housings 
and external covers, the laser beam cannot escape...

Safety and legal
61
A
WARNING 
Use of controls, adjustments or performance of procedures other than those specified in this 
manual may result in hazardous invisible radiation exposure.
Internal laser radiation 
Max. Radiation Power: 5 mW
Wave Length: 770 – 810 nm
Laser Class: Class 3B
 
Disconnect deviceA
This product must be installed near an AC power outlet that is easily accessible. In case of 
emergencies, you must disconnect the power cord from the AC power outlet to shut off power 
completely.
LAN...

62
Libtiff Copyright and LicenseA
Use and Copyright
Copyright© 1988-1997 Sam Leffler 
Copyright© 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for any 
purpose is hereby granted without fee, provided that (i) the above copyright notices and this 
permission notice appear in all copies of the software and related documentation, and (ii) the 
names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity...

Safety and legal
63
A
TrademarksA
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft 
Corporation in the United States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the 
United...

64
B
OptionsB
This machine has the following optional accessories. You can increase the capabilities of the 
machine with these items.
OptionsB
Lower tray unit SO-DIMM memory
LT-5300
  
 

Options
65
B
Optional paper tray 
(LT-5300)
B
An optional lower tray can be installed, and it 
can hold up to 250 sheets of 20 lb (80 g/m
2) 
paper.
When an optional tray is installed, the 
machine can hold up to 550 sheets of plain 
paper.
 
For setup, see the instructions that we have 
supplied with the lower tray unit.
Memory boardB
This machine has 64 MB of standard memory 
and  one slot for optional memory expansion. 
You can expand the memory up to 576 MB by 
installing dual in-line memory modules...

66
Installing extra memoryB
aTurn off the machine’s power switch.
bDisconnect the interface cable from the 
machine, and then unplug the power 
cord from the AC power outlet.
Note
Be sure to turn off the machine’s power 
switch before you install or remove the 
SO-DIMM.
 
cRemove the SO-DIMM cover and 
interface access cover.
 
 
dUnpack the SO-DIMM and hold it by its 
edges.
IMPORTANT
To prevent damage to the machine from 
static electricity, DO NOT touch the 
memory chips or the board surface.
 
eHold...

67
C
C
TroubleshootingC
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be 
made from within that country.
 
If you are having difficulty with your machineC
If you think there is a problem, check the chart below and follow the troubleshooting tips. You can 
solve most problems by yourself.
If you need additional help, the Brother Solutions Center offers the latest FAQs and 
troubleshooting tips.
Visit us at http://solutions.brother.com/
.
Copy...