Brother DCP 8065DN User Manual

							Making copies29
5
Making N in 1 copies or a 
poster5
You can reduce the number of pages for 
copies by using the N in 1 copy feature. This 
allows you to copy two or four pages onto one 
page, which lets you save paper. 
You can also make a poster. When you use 
the poster feature your machine divides your 
document into sections, then enlarges the 
sections so you can assemble them into a 
poster. If you want to print a poster, use the 
scanner glass.
Important5
„
Please make sure the paper size is set to 
Letter,  A4, Legal or  Folio.
„ (P ) means Portrait and ( L) means 
Landscape.
„ You can not use the Enlarge/Reduce 
setting with the N in 1 and poster features.
„ You can only make one poster copy at a 
time.
aLoad your document.
bUse the dial pad to enter the number of 
copies (up to 99).
cPress  N in 1.
dPress  a or  b to select  2in1(P) , 
2in1(L) , 4in1(P) ,  
4in1(L) , Poster (3 x 3)  or Off 
(1 in 1). Press OK .
ePress Start to scan the page.
If you are making a poster or placed the 
document in the ADF, the machine 
scans the pages and starts printing. If you are using the scanner glass:
fAfter the machine scans the page, 
press
1 to scan the next page.
 
Flatbed Copy:
 Next Page?
a1.Yes
b2.No
Select 
ab & OK
gPlace the next page on the scanner 
glass. Press  OK.
Repeat  f and  g for each page of the 
layout.
hAfter all the pages have been scanned, 
press  2 in  f to finish.
 
						

							Chapter 5
30
If you are copying from the ADF:5
Insert your document face up in the direction 
shown below: „ 2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
If you are copying from the scanner 
glass:
5
Insert your document face down in the 
direction shown below:
„ 2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
„Poster (3x3)
You can make a poster size copy of a 
photograph.
 
 
						

							Making copies31
5
Duplex (2-sided) copying 
(DCP-8065DN only)5
If you want to use the duplex copy feature, 
load your document in the ADF.
Duplex Copy5
„
1 sided i  2 sided
Portrait
 
Landscape
 
„ 2 sided i  2 sided
Portrait
 
Landscape
 
„ 2 sided i  1 sided
Portrait
 
Landscape
 
aLoad your document.
bUse the dial pad to enter the number of 
copies (up to 99).
cPress  Duplex  and a or  b to select 
1sided i2sided , 
2sided i2sided  or  
2sided i1sided .
 
Duplexa1sided i  2sided
2sided
  i  2sided
b2sided i  1sided
Select ab & OK
Press  OK.
dPress  Start to scan the document.
Note
Duplex copy using a 2-sided legal size 
document is not available from the ADF.
 
If you are using the scanner glass:
eAfter the machine scans the page, 
press 1 to scan the next page.
 
Flatbed Copy:
 Next Page?
a1.Yesb2.No
Select 
ab & OK
fPlace the next page on the scanner 
glass. Press  OK.
Repeat  e and  f for each page of the 
layout.
gAfter all the pages have been scanned, 
press  2 in  e to finish.
1
2
11
2
11
21
2
11
2
11
2
11
2
11
2
1
2
11
2
11
212
 
						

							Chapter 5
32
Advanced Duplex Copy5
„ Advanced 2 sided  i 1 sided
Portrait
 
Landscape
 
„ Advanced 1 sided  i 2 sided
Portrait
 
Landscape
 
aLoad your document.
bUse the dial pad to enter the number of 
copies (up to 99).
cPress  Duplex  and a or b  to select 
Advanced . 
 
Duplex
a1sided i  2sided
2sided
  i  2sidedb2sided i  1sided
Select 
ab & OK
Press  OK.
dPress  a or  b to select 
2sided i1sided or 
1sided i2sided. Press  OK.
 
Duplex Advanced
a2sided i  1sidedb1sided i  2sided
Select 
ab & OK
ePress  Start to scan the document.
Note
Duplex copy using a 2-sided legal size 
document is not available from the ADF.
 
If you are using the scanner glass:
fAfter the machine scans the page, 
press 1 to scan the next page.
 
Flatbed Copy:
 Next Page?
a1.Yes
b2.No
Select 
ab & OK
gPlace the next page on the scanner 
glass. Press OK .
Repeat  f and g  for each page of the 
layout.
hAfter all the pages have been scanned, 
press  2 in f  to finish.
1
2
11
2
11
2
1
2
1
2
11
2
11
2
12
 
						

							Making copies33
5
Sorting copies using the ADF5
You can sort multiple copies. Pages will be 
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so 
on.
aLoad your document.
bUse the dial pad to enter the number of 
copies (up to 99).
cPress Sort.
dPress  Start.
Adjusting contrast5
Contrast5
Adjust the contrast to help an image look 
sharper and more vivid.
To temporarily  change the contrast setting, 
follow the steps below:
aLoad your document.
bUse the dial pad to enter the number of 
copies (up to 99).
c(DCP-8060) 
Press  Contrast.
(DCP-8065DN) 
Press  Contrast/Quality . 
Press  a or  b to choose  Contrast. 
Press  OK.
 
Contrast:-nnonn+  c
Quality :Auto
Enlg/Red:100%
Tray    :MP>T1 
Select d c  & OK
dPress  d or  c to increase or decrease 
the contrast.
ePress  Start.
To change the default  setting follow the steps 
below:
aPress  Menu, 2, 3 . 
23.Contrast
       -
nnonn + 
Select d c  & OK
bPress  d or  c to change the contrast. 
Press  OK.
cPress  Stop/Exit .
 
						

							Chapter 5
34
Tray Select5
You can change the tray use only for the next 
copy.
aLoad your document.
bUse the dial pad to enter the number of 
copies (up to 99).
cPress  Tray Select . 
Contrast:-nnonn+   
Quality :Auto
Enlg/Red:100%
Tray    :MP>T1 
c 
Select d  c  & OK
dPress  d or  c to select the tray usage. 
Press  OK.
ePress  Start.
* XXX is the paper size you set in Menu , 1 , 2 .
Note
• T2 and Tray #2 appear only if the optional 
paper tray is installed.
• To change the Tray select setting,  see  Tray use in Copy mode  on page 18.
 
Out of Memory 
message
5
If the memory becomes full while you are 
making copies, the LCD message will guide 
you through the next step.
If you get an Out of Memory  message while 
scanning a subsequent page, you will have 
the option to press  Start to copy the pages 
scanned so far, or to press  Stop/Exit to 
cancel the operation.
If you run out of memory, you can add it. See 
Memory Board  on page 49.
Press Tray Select MP>T1 or M>T1>T2
T1>MP or T1>T2>M
#1(XXX)*
#2(XXX) *
MP(XXX) *
 
						

							Section III
SoftwareIII
Software and Network features36
 
						

							36
6
The User’s Guide on the CD-ROM includes 
the Software User’s Guide and Network 
User’s Guide for features available when 
connected to a computer (for example, 
Printing and Scanning).„ Printing
(For Windows
®, see Chapter 1 in the 
Software User’s Guide on the CD-ROM .)
(For Macintosh
®, see  Chapter 7 in the 
Software User’s Guide on the CD-ROM .)
„ Scanning
(For Windows
®, see Chapter 2 in the 
Software User’s Guide on the CD-ROM .)
(For Macintosh
®, see  Chapter 8 in the 
Software User’s Guide on the CD-ROM .)
„ ControlCenter2 
(For Windows
®, see Chapter 3 in the 
Software User’s Guide on the CD-ROM .)
(For Macintosh
®, see  Chapter 9 in the 
Software User’s Guide on the CD-ROM .)
„ Network Printing (DCP-8065DN only)
(See  the Network User’s Guide on the 
CD-ROM .)
„ Network Scanning (DCP-8065DN only)
(For Windows
®, see Chapter 4 in the 
Software User’s Guide on the CD-ROM .)
(For Macintosh
®, see  Chapter 10 in the 
Software User’s Guide on the CD-ROM .)
Note
See Accessing the complete User’s Guide  
on page 3
 
Software and Network features6
 
						

							Section IV
AppendixesIV
Safety and Legal38
Options48
Troubleshooting and routine maintenance51
Menu and Features81
Specifications91
Glossary99
 
						

							38
A
Choosing a locationA
Place your machine on a flat, stable surface that is free of vibration and shocks. Put the machine 
near a standard, grounded AC power outlet. Choos e a location where the temperature remains 
between 50 °F and 90.5 °F (10 °C and 32.5 °C) and the humidity is between 20% to 80% (without 
condensation).
CAUTION 
Avoid placing your machine in a high-traffic area.
  
Do not place the machine near heaters, air conditioners, refrigerators, water, chemicals or 
devices that contain magnets or generate magnetic fields.
  
Do not expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive 
gasses, moisture, or dust.
  
Do not connect your machine to an AC power outlet controlled by wall switches or automatic 
timers.
  
Disruption of power can wipe out information in the machine’s memory.
  
Do not connect your machine to an AC power outlet on the same circuit as large appliances or 
other equipment that might disrupt the power supply.
  
Avoid interference sources, such as speakers or the base units of cordless phones.
  
Do not put objects on top of the machine.
  
DO NOT use flammable substances near the machine.
Doing this might cause a fire or electrical shock.
 
Safety and LegalA