Home > Brother > Printer > Brother DCP 8020 User Manual

Brother DCP 8020 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Brother DCP 8020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							MAKING COPIES   5 - 1
    5
    Using the DCP as a copier
    Your DCP can make up to 99 copies at a time.
    Printable area
    The printable area of your DCP begins at approximately 0.14 in. 
    (3.64 mm) on both sides and 0.12 in. (3 mm) on the top and bottom 
    of the paper.
    Making copies
    Unprintable 
    area
    0.12 (3mm) 0.14 (3.64mm)Ex: Letter (Original)      Letter (Paper) 
     
    						
    							5 - 2   MAKING COPIES
    Temporary copy settings
    You can improve your copies by using the temporary copy keys
     
    (
    Copy): Enlarge/Reduce, Contrast, Quality, Tray Select, 
    Sort and N in 1 (For DCP-8020) or Duplex/N in 1 (For 
    DCP-8025D). These settings are temporary
    , and the DCP returns to 
    its default settings 1 minute after it finishes copying. If you want to 
    use these temporary settings again, place the next original in the 
    ADF or on the scanner glass within that time.
    Temporary Copy Keys
     
    						
    							MAKING COPIES   5 - 3
    Making a single copy from the ADF
    1Place the original face up in the ADF.
    2Press Start.
    Do NOT pull on the original while copying is in progress. 
    Making multiple copies from the ADF
    1Insert the original face up in the ADF.
    2Use the Numeric keys to enter the number of copies you want 
    (up to 99).
    3Press Start. 
    To stop copying and eject the original, press Stop/Exit.
    To sort the copies, press the Sort key.
     
    						
    							5 - 4   MAKING COPIES
    Single or multiple copies using the scanner glass
    You can make multiple copies using the scanner glass. Multiple copies 
    will be stacked (all copies of page 1, then all copies of page 2, and so 
    on). Use the Temporary Copy keys to choose more settings. (See Using 
    the copy keys (temporary settings) on page 5-5.)
    1Lift the document cover.
    2Using the document guidelines on the left, center the original 
    face down on the scanner glass and close the document cover.
    3Using the numeric keys, enter the number of copies you want 
    (up to 99). 
    For example, press 
    3 8 for 38 copies. 
    4Press Start.
    The DCP will start scanning the original.
    Out of Memory message
    If the Out of Memory message 
    appears, press 
    Stop/Exit to cancel or 
    Start to copy scanned pages.
    If you want to sort multiple copies, use the ADF.
    (See Making a single copy from the ADF
     on page 5-3.)
    If this error message appears more than once you may wish to 
    consider increasing the memory size. For more information on 
    how to increase the memory size, see Memory board
     on page 
    15-1.
    Place the original face 
    down on the Scanner 
    Glass
    Document 
    Guidelines
    Out of Memory
    Copy:Press Start
    Quit:Press Stop
     
    						
    							MAKING COPIES   5 - 5
    Using the copy keys
    (temporary settings)
    When you want to change the settings only for the next copy, use the 
    temporary copy keys.
    You can use different combinations. The large LCD shows your 
    current copy mode settings.Temporary Copy Keys
    Duplex / N in 1
    Example of Copy mode LCD
    Enlg/Red:100%
    Quality :Auto
    Contrast:- +
    Tray :#1(LTR) 
    Press▲▼ or Start  01
     
    						
    							5 - 6   MAKING COPIES
    Enlarge/Reduce
    You can select the following enlargement or reduction ratios.
    Auto sets the DCP to calculate the ratio that fits the size of your 
    paper.
    Custom allows you to enter a ratio from 25% to 400%.
    1Place the original face up in the ADF, or face down on the 
    scanner glass.
    2Use the numeric keys to enter the number of copies you want 
    (up to 99).
    3Press Enlarge/Reduce. 
    4Press Enlarge/Reduce or  . Press 
    Enlarge/Reduce100%
    104% (EXE 
    → LTR)
    141% (A5 
    → A4)
    200%
    Auto
    Custom (25 - 400%)
    50%
    70% (A4 
    → A5)
    78% (LGL 
    → LTR)
    83% (LGL 
    → A4)
    85% (LTR 
    → EXE)
    91% (Full Page)
    94% (A4 
    → LTR)
    97% (LTR 
    → A4)
    Enlg/Red:100%  
    Quality :Auto
    Contrast:- +
    Tray :#1(LTR)
     01
     
    						
    							MAKING COPIES   5 - 7
    5Press   or   to select the enlargement or reduction ratio 
    you want.
    Press 
    Set.
    —OR—
    You can select 
    Custom (25-400%) and press Set.
    Use the numeric keys to enter an enlargement or reduction ratio 
    from 
    25% to 400%.
    Press 
    Set.
    (For example, press 
    5 3 to enter 53%.)
    6Press Start.
    —OR—
    Press other temporary copy keys for more settings.
    ■Special Copy Options (2in1, 4in1 or Poster) are not available 
    with 
    Enlarge/Reduce.
    ■Auto is not available with the scanner glass.
     
    						
    							5 - 8   MAKING COPIES
    Quality (type of original) 
    You can select the Quality for your type of original. The default 
    setting is 
    Auto, which is used for originals that contain both text and 
    photographs. 
    Text is used for originals containing only text. Photo is 
    used for copying photographs.
    1Place the original face up in the ADF, or face down on the 
    scanner glass.
    2Use the numeric keys to enter the number of copies you want 
    (up to 99).
    3Press Quality.
    4Press   or   to choose the type of original (Auto, Text or 
    Photo). 
    Press 
    Set.
    5Press Start.
    —OR—
    Press other Temporary Copy keys for more settings.
    Sorting copies using the ADF
    If you want to sort multiple copies, use the ADF. Pages will be printed 
    in the order 123, 123, 123, and so on.
    1Place the original face up in the ADF.
    2Use the numeric keys to enter the number of copies you want 
    (up to 99).
    3Press Sort.
    4Press Start.
    —OR—
    Press other Temporary Copy keys for more settings.
     
    						
    							MAKING COPIES   5 - 9
    Contrast
    You can adjust the copy contrast to make copies darker or lighter.
    1Place the original face up in the ADF, or face down on the 
    scanner glass.
    2Use the numeric keys to enter the number of copies you want 
    (up to 99).
    3Press Contrast.
    4Press   to make a copy lighter
    —OR—
    Press   to make a copy darker. 
    Press 
    Set.
    5Press Start.
    —OR—
    Press other Temporary Copy keys for more settings.
    Press 
    Contrast-  +
    -  +
    -  +
    -  +
    -  +
    -  +
     
    						
    							5 - 10   MAKING COPIES
    Tray Select
    You can change the tray use only for the next copy.
    1Place the original face up in the ADF, or face down on the 
    scanner glass.
    2Use the numeric keys to enter the number of copies you want 
    (up to 99).
    3Press Tray Select.
    4Press   or   to select the tray usage.
    Press 
    Set.
    5Press Start.
    —OR—
    Press other Temporary Copy keys for more settings.
    (For DCP-8020 with the optional paper tray #2)
    (For DCP-8025D with the optional paper tray #2)
    XXX* is the paper size you set in 
    Menu, 1. 2. Press 
    Tray SelectAuto
    #1 (XXX*)
    #2 (XXX*)
    Press Tray SelectAuto
    #1 (XXX*)
    #2 (XXX*)
    MP Tray
    For DCP-8020 the LCD displays the tray use selections only if 
    the optional paper tray is installed.
     
    						
    All Brother manuals Comments (0)

    Related Manuals for Brother DCP 8020 User Manual