Brother DCP 7065DN User Manual

							Troubleshooting
67
B
 
CurledChoose Reduce Paper Curl mode in the printer driver when you 
do not use our recommended paper. See Other Print Options (for 
Windows
®) or Print Settings (For Macintosh) in the Software 
Users Guide.
Turn the paper over in the paper tray, and print again. (Excluding 
letterhead paper) If the problems remains, switch the Anti-Curl 
Levers as follows:
aOpen the back cover.
bLift the lever (1) and slide the two gray levers (2) in the 
direction of the arrow.
 
Examples of poor print qualityRecommendation
1
22
1
2
 
						

							68
 
CurledLift up the output tray support flap (1).
 
Examples of poor print qualityRecommendation
1
 
						

							Troubleshooting
69
B
Machine InformationB
Checking the Serial NumberB
You can see the machine’s Serial Number on 
the LCD.
aPress Menu.
b(For DCP-7060D)
Press a or b to choose 3.Machine 
Info.. 
Press OK.
(For DCP-7065DN)
Press a or b to choose 4.Machine 
Info.. 
Press OK.
(For HL-2280DW)
Press a or b to choose 5.Machine 
Info.. 
Press OK.
cPress a or b to choose 1.Serial No..
Press OK.
 
Machine Info.
1.Serial No.
dPress Stop/Exit.
Reset functionsB
The following reset functions are available:
1 (For DCP-7065DN / HL-2280DW) 
Network
You can reset the internal print server 
back to its default factory settings such as 
the password and IP address information.
2All Settings
You can reset all the machine’s settings 
back to its default factory settings.
Brother strongly recommends you 
perform this operation when you dispose 
of the machine.
Note
Unplug the interface cable before you 
choose Network or All Settings.
 
How to reset the machineB
aPress Menu.
bPress a or b to choose 1.General 
Setup. 
Press OK.
cPress a or b to choose 5.Reset. 
Press OK.
dPress a or b to choose the type of reset 
function you want to use.
Press OK.
eDo one of the following:
To reset the settings, press a to 
choose Reset. Then go to step f.
To exit without making changes, 
press b to choose Exit. 
Then go to step g.
fYou will be asked if you want to reboot 
the machine. Do one of the following:
To reboot the machine, press a to 
choose Yes. 
The machine will begin the reset.
To exit without rebooting, press b to 
choose No. 
Then go to step g.
gPress Stop/Exit.
 
						

							70
C
On-screen 
programming
C
Your machine has been designed to be easy 
to use. The LCD provides on-screen 
programming using the menu keys.
We have created step by step on-screen 
instructions to help you program your 
machine. Simply follow the steps as they 
guide you through the menu selections and 
programming options.
Menu tableC
You can program your machine by using the 
Menu table on page 72. These pages list the 
menu selections and options. Press Menu 
and then press a or b to access the menus 
and program your machine. For example, to 
set Copy Quality to Photo Quality
aPress Menu.
bPress a or b to choose 2.Copy.
Press OK.
cPress a or b to choose 1.Quality.
Press OK.
dPress a or b to choose Photo.
Press OK.
ePress Stop/Exit.
Menu keysC
Menu and featuresC
 
 
Access the menu.
 Go to the next menu 
level.
Accept an option.
 Exit the menu by 
pressing repeatedly.
Go back to the previous 
menu level.
 Scroll through the 
current menu level.
 Exit the menu.


 
						

							Menu and features
71
C How to access the menu 
modeC
aPress Menu.
bChoose an option. You can scroll 
through each menu level by pressing a 
or b for the direction you want.
cPress OK when the option you want 
appears on the LCD.
The LCD will then show the next menu 
level.
dPress a or b to scroll to your next menu 
selection.
ePress OK.
When you have finished setting an 
option, the LCD will show Accepted.
fPress Stop/Exit to exit Menu mode.
 
						

							72
Menu tableC
The factory settings are shown in Bold with an asterisk.
Choose & OK Choose & OK to accept to exit
                   
Level 1 Level 2 Level 3 Level 4 Options Descriptions Page
1.General 
Setup1.Paper 1.Paper 
Type—Thin
Plain*
Thick
Thicker
Recycled 
Paper
LabelSets the type of 
paper in the paper 
tray.15
2.Paper 
Size—A4
Letter*
Legal
Executive
A5
A5 L
A6
B5
B6
FolioSets the size of the 
paper in the paper 
tray.15
2.Ecology 1.Toner 
Save—On
Off*Increases the page 
yield of the toner 
cartridge.See
1.
1See Advanced Users Guide.
2See Quick Setup Guide.
 The factory settings are shown in Bold with an asterisk.



 
						

							Menu and features
73
C
1.General 
Setup
(Continued)2.Ecology
(Continued)2.Sleep 
Time— Range varies 
depending on 
models.
003Min*Conserves power.
See1.
3.LCD 
Contrast——-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjusts the contrast 
of the LCD.
4.Replace 
Toner——Continue
Stop*The machine will 
stop printing until you 
replace the toner 
cartridge.
5.Reset
(For 
DCP-7060D)1.All 
Settings—a Reset
b ExitRestores the 
machines settings to 
the original factory 
default settings.69
5.Reset
(For 
DCP-7065DN 
and 
HL-2280DW)1.Network—a Reset
b ExitRestores the 
machines network 
settings to the 
original factory 
default settings.
2.All 
Settings—a Reset
b ExitRestores all the 
machines settings to 
the original factory 
default settings.
0.Local 
Language— (Choose your 
language)— Allows you to change 
the LCD language for 
your country.See 
2.
Level 1 Level 2 Level 3 Options Descriptions Page
2.Copy 1.Quality—Auto*
Text
Photo
GraphYou can choose the 
Copy resolution for 
your type of 
document.See
1.
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Level 4 Options Descriptions Page
1See Advanced Users Guide.
2See Quick Setup Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							74
2.Copy
(Continued)2.Brightness—-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjust the brightness 
for copies.See1.
3.Contrast—-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+Adjusts the contrast 
for copies.
Level 1 Level 2 Level 3 Options Descriptions Page
3.Printer
(For HL-2280DW)1.Print 
Options1.Internal 
Font— Prints a list of the 
machine’s internal 
fonts.See
2.
2.
Configuration— Prints a list of the 
machine’s printer 
settings.
3.Test Print— Prints a test page.
2.Duplex—Off*
On(Long Edge)
On(Short Edge)Enables or disables 
duplex printing. You 
can also choose long 
edge or short edge 
duplex printing.
3.Reset 
Printer—a Reset
b ExitRestores the printer 
settings to the original 
factory default 
settings.
1See Advanced Users Guide.
2See Software Users Guide.
 The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Options Descriptions Page
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
75
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
3.Network
(For DCP-7065DN)
1.TCP/IP 1.Boot 
Method—Auto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway— [000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node Name—BRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
Config—Auto*
StaticChooses the WINS 
configuration mode.
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							76
3.Network
(For DCP-7065DN)
(Continued)1.TCP/IP
(Continued)7.WINS 
Server—Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS Server—Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA—On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6—On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
2.Ethernet——Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode.
3.Status——Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFFShows the Ethernet 
link status.
4.MAC 
Address— — — Shows the MAC 
address of the 
machine.
0.Network 
Reset—a Reset
b ExitReboot OK?
a Yes b NoRestore all network 
settings to factory 
default. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk.