Brother DCP 7065DN User Manual

							Menu and features
77
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
4.Network
(For HL-2280DW)
1.Wired LAN 1.TCP/IP 1.Boot 
MethodAuto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRNXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
ConfigAuto*
StaticChooses the WINS 
configuration mode.
7.WINS 
ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							78
4.Network
(For HL-2280DW)
(Continued)1.Wired LAN
(Continued)2.Ethernet—Auto*
100B-FD
100B-HD
10B-FD
10B-HDChooses the 
Ethernet link mode.
3.Wired 
Status—Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFFYou can see the 
current wired status.
4.MAC 
Address— — Shows the MAC 
address of the 
machine.
5.Set to 
Default—a Reset
b ExitRestore the wired 
network setting to 
factory default.
6.Wired 
Enable—On*
OffEnable or Disable the 
Wired LAN manually.
2.WLAN 1.TCP/IP 1.Boot 
MethodAuto*
Static
RARP
BOOTP
DHCPChooses the Boot 
method that best 
suits your needs.
2.IP Address[000-255]. [000-255]. 
[000-255]. [000-255]Enter the IP address.
3.Subnet 
Mask[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Subnet 
mask.
4.Gateway[000-255]. [000-255]. 
[000-255]. [000-255]Enter the Gateway 
address.
5.Node NameBRWXXXXXXXXXXXXEnter the Node 
name.
6.WINS 
ConfigAuto*
StaticChooses the WINS 
configuration mode. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
79
C
4.Network
(For HL-2280DW)
(Continued)2.WLAN
(Continued)1.TCP/IP
(Continued)7.WINS 
ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
WINS server.
8.DNS ServerPrimary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255]Specifies the IP 
address of the 
primary or secondary 
DNS server.
9.APIPA On*
OffAutomatically 
allocates the IP 
address from the 
link-local address 
range.
0.IPv6On
Off*Enable or Disable the 
IPv6 protocol. If you 
want to use the IPv6 
protocol, visit 
http://solutions.
brother.com/ for 
more information.
2.Setup 
Wizard— — You can configure 
your print server.
3.WPS/AOSS— — You can easily 
configure your 
wireless network 
settings using the 
one-button push 
method.
4.WPS w/PIN 
Code— — You can easily 
configure your 
wireless network 
settings using WPS 
with a PIN code. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							80
4.Network
(For HL-2280DW)
(Continued)2.WLAN
(Continued)5.WLAN 
Status1.StatusActive(11b)
Active(11g)
Wired LAN 
Active
WLAN OFF
AOSS Active
Connection FailYou can see the 
current wireless 
network status.
2.SignalStrong
Medium
Weak
NoneYou can see the 
current wireless 
network signal 
strength.
3.SSID— You can see the 
current SSID.
4.Comm. ModeAd-hoc
InfrastructureYou can see the 
current 
Communication 
Mode.
6.MAC 
Address— — Shows the MAC 
address of the 
machine.
7.Set to 
Default—a Reset
b ExitRestore the wireless 
network settings to 
factory default.
8.WLAN 
Enable—1.On
2.Off*Enable or disable the 
wireless LAN 
manually.
0.Network 
Reset—a Reset
b ExitReboot OK?
a Yes b NoRestores all network 
settings to factory 
default. Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							Menu and features
81
C
Level 1 Level 2 Level 3 Options Descriptions Page
3.Machine Info.
(For DCP-7060D)
4.Machine Info.
(For DCP-7065DN)
5.Machine Info.
(For HL-2280DW)1.Serial No.— — You can check the 
serial number of your 
machine.69
2.Page Counter—Total
List
Copy
PrintYou can check the 
number of total 
pages the machine 
has printed during its 
life.See
1.
3.User 
Settings——
4.Network 
Config
(For DCP-7065DN 
and HL-2280DW)——
5.WLAN Report
(For HL-2280DW)——
4.Drum Life
(For DCP-7060D)
5.Drum Life
(For DCP-7065DN)
6.Drum Life
(For HL-2280DW)— — You can check the 
percentage of a 
Drum life that 
remains available.
1See Advanced Users Guide.
 The factory settings are shown in Bold with an asterisk.
 
						

							82
D
GeneralD
Note
This chapter provides a summary of the machines’ specifications. For additional specifications 
visit http://www.brother.com/
 for details.
 
SpecificationsD
Printer TypeLaser
Print MethodElectrophotography by semiconductor laser beam scanning
Memory Capacity32 MB
LCD (liquid crystal 
display)16 characters  2 lines
Power Source110 - 120 V AC 50/60 Hz
Power Consumption
1Peak: 1080 W
Copying:
2Approx. 445 W at 25C (77F)
Ready: Approx. 55 W at 25C (77F)
For Wireless models
(WLAN: On) Sleep: Approx. 2.8 W
(WLAN: Off) Deep Sleep: Approx. 1.0 W
For non-Wireless models
Deep Sleep: Approx. 0.9 W
Note
All figures stated above (except Peak) are average figures.
 
1USB connected to PC
2When making a copy from one sheet
 
						

							Specifications
83
D
Dimensions DCP-7065DN D
DCP-7060D/HL-2280DW D
WeightWith Consumables: (For DCP-7060D) 10.1 kg (22.3 lb) 
(For DCP-7065DN) 11.4 kg (25.1 lb) 
(For HL-2280DW) 10.3 kg (22.7 lb)
Noise level Sound power
Operating
(For DCP-7060D) LWAd = 6.74 B (A) 
/ (For DCP-7065DN / HL-2280DW) 
L
WAd = 6.81 B (A)
Standby: LWAd = 4.3 B (A)
Sound pressure
Operating (Printing): L
PAm = 53 dB (A)
Standby: L
PAm = 30 dB (A)
15.7 in.
(398.5 mm)
12.45 in.
(316 mm)
15.95 in.
(405 mm)
15.95 in.
(405 mm)10.6 in.
(268 mm)
15.7 in.
(398.5 mm)
 
						

							84
Document SizeD
TemperatureOperating: 50 F to 90.5 F (10 to 32.5 C)
Storage: 32 F to 104 F (0 to 40 C)
HumidityOperating: 20 to 80% (without condensation)
Storage: 10 to 90% (without condensation)
ADF (automatic document 
feeder)
(For DCP-7065DN)Up to 35 pages (Staggered) 20 lb (80 g/m
2)
Document Size 
(Single-sided)ADF Width:
(For DCP-7065DN)5.8 to 8.5 in. (147.3 to 215.9 mm)
ADF Length:
(For DCP-7065DN)5.8 to 14 in. (147.3 to 355.6 mm)
Scanner Glass Width: Max. 8.5 in. (215.9 mm)
Scanner Glass Length: Max. 11.7 in. (297 mm)
 
						

							Specifications
85
D
Print mediaD
1For labels, we recommend removing printed pages from the output paper tray immediately after they exit the machine 
to avoid the possibility of smudging.
216 to 28 lb (60 to 105 g/m2) for duplex print.
3Legal or Folio size paper is not available in some regions outside the USA and Canada.
Paper Input  Paper Tray
Paper Type: Plain Paper, Thin Paper or Recycled Paper
Paper Size: Letter, A4, B5 (ISO/JIS), A5, 
A5 (Long Edge), B6 (ISO), A6, Executive, 
Legal
3 and Folio3
Paper Weight:
16 to 28 lb (60 to 105 g/m2)
Maximum Paper Tray 
Capacity:Up to 250 sheets of 20 lb (80 g/m
2) 
Plain Paper
Manual Feed Slot (Manual)
Paper Type:
Envelope, Labels
1, Thin Paper, Thick 
Paper, Thicker Paper, Recycled Paper, 
Bond Paper or Plain Paper
Paper Size: Width: 3.0 to 8.5 in. (76.2 to 216 mm)
Length: 4.6 to 16 in. 
(116.0 to 406.4 mm)
Paper Weight:
16 to 43 lb (60 to 163 g/m
2)2
Maximum Paper Tray 
Capacity:One sheet at a time 20 lb (80 g/m2) Plain 
Paper
Paper Output Face-Down Output TrayUp to 100 sheets (face down print delivery 
to the Face down output paper tray)
Face-Up Output TrayOne sheet (face up print delivery to the 
Face up output paper tray)
Duplex 
PrintingPaper Size 
(Automatic Duplex):Letter, Legal and Folio
Paper Weight 
(Automatic Duplex):16 to 28 lb (60 to 105 g/m
2)
Paper Type 
(Automatic Duplex):Plain Paper or Recycled Paper
 
						

							86
CopyD
Color/MonochromeMonochrome
Copy WidthMax. 8.3 in. (210 mm) 
Multiple CopiesStacks or Sorts up to 99 pages
Reduce/Enlarge25% to 400% (in increments of 1%)
ResolutionUp to 600  600 dpi
First Copy Out TimeLess than 11 seconds (from Ready mode and standard tray)
ReadyAt 25C (77F)