Brother DCP 7057R User Manual
Have a look at the manual Brother DCP 7057R User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 43
Control panel setup
38
5
Function table and default factory settings5
The factory settings are shown in Bold with an asterisk.
DCP-7055W and DCP-7057W5
Main menu Submenu Menu selections Options
3.Network 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet...](http://img.usermanuals.tech/thumb/13/35723/w64_Brother_DCP-7057R-42.png "Page 43
Control panel setup
38
5
Function table and default factory settings5
The factory settings are shown in Bold with an asterisk.
DCP-7055W and DCP-7057W5
Main menu Submenu Menu selections Options
3.Network 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet...")
![Page 45
Control panel setup
40
5
DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN5
Main menu Submenu Menu selections Options
3.Network
(DCP-7065DN)
5.Network
(MFC-7360N and
MFC-7460DN)
6.Network
(MFC-7860DN)1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet...](http://img.usermanuals.tech/thumb/13/35723/w64_Brother_DCP-7057R-44.png "Page 45
Control panel setup
40
5
DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN5
Main menu Submenu Menu selections Options
3.Network
(DCP-7065DN)
5.Network
(MFC-7360N and
MFC-7460DN)
6.Network
(MFC-7860DN)1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet...")
Control panel setup 36 5 Reset the network settings to the factory default5 You can reset the print server back to its default factory settings (resetting all information such as the password and IP address information). Note • This function resets all wired and wireless network settings to the factory default. • You can also reset the print server back to its factory default settings using the BRAdmin applications or Web Based Management. (For more information, see Other Management Utilities on page 6.) aPress Menu. bPress a or b to choose Network. Press OK. cPress a or b to choose Network Reset. Press OK. dPress 1 to choose Reset. ePress 1 to choose Yes for reboot. fThe machine will re-start. Printing the Network Configuration List5 Note Node name: The Node name appears on the Network Configuration List. The default node name is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.) The Network Configuration List prints a report listing all the current network configuration including the network print server settings. aPress Menu. b(For MFC models) Press a or b to choose Print Reports. (For DCP models) Press a or b to choose Machine Info.. Press OK. cPress a or b to choose Network Config. Press OK. dPress Start. Note If the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again.
Control panel setup 37 5 Printing the WLAN report (For HL-2280DW, DCP-7055W, DCP-7057W, DCP-7070DW and MFC-7860DW) 5 The WLAN Report prints your machine’s wireless status report. If the wireless connection failed, check the error code on the printed report and refer to Troubleshooting in the Quick Setup Guide. aPress Menu. b(For MFC models) Press a or b to choose Print Reports. (For DCP models) Press a or b to choose Machine Info.. Press OK. cPress a or b to choose WLAN Report. Press OK. dPress Start.
Control panel setup 38 5 Function table and default factory settings5 The factory settings are shown in Bold with an asterisk. DCP-7055W and DCP-7057W5 Main menu Submenu Menu selections Options 3.Network 1.TCP/IP 1.Boot Method Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.) 2.IP Address[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 1 3.Subnet Mask[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 1 4.Gateway[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 5.Node NameBRWxxxxxxxxxxxx (up to 32 characters) 6.WINS Config Auto* Static 7.WINS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 8.DNS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 9.APIPA On* Off 0.IPv6On Off*
Control panel setup 39 5 1On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network. 3.Network (continued)2.Setup WizardOn Off— 3.WPS/AOSSOn Off— 4.WPS w/PIN CodeOn Off— 5.WLAN Status1.StatusActive(11b) Active(11g) WLAN OFF AOSS Active Connection Fail 2.SignalSignal:Strong Signal:Medium Signal:Weak Signal:None 3.SSID— 4.Comm. ModeAd-hoc Infrastructure 6.MAC Address—— 7.WLAN Enable—On Off* 0.Network Reset—Reset Exit Main menu Submenu Menu selections Options
Control panel setup 40 5 DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN5 Main menu Submenu Menu selections Options 3.Network (DCP-7065DN) 5.Network (MFC-7360N and MFC-7460DN) 6.Network (MFC-7860DN)1.TCP/IP 1.Boot Method Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.) 2.IP Address[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 1 3.Subnet Mask[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 1 4.Gateway[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 5.Node NameBRNxxxxxxxxxxxx (up to 32 characters) 6.WINS Config Auto* Static 7.WINS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 8.DNS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 9.APIPA On* Off 0.IPv6On Off*
Control panel setup 41 5 1On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network. 3.Network (DCP-7065DN) 5.Network (MFC-7360N and MFC-7460DN) 6.Network (MFC-7860DN) (continued)2.Ethernet—Auto* 100B-FD 100B-HD 10B-FD 10B-HD 3.Status—Active 100B-FD Active 100B-HD Active 10B-FD Active 10B-HD Inactive Wired OFF 4.MAC Address—— 5.Scan To FTP (For MFC-7460DN and MFC-7860DN) —Color 100 dpi* Color 200 dpi Color 300 dpi Color 600 dpi Gray 100 dpi Gray 200 dpi Gray 300 dpi B&W 200 dpi B&W 200x100 dpi(If you choose Color option) PDF* Secure PDF JPEG XPS (If you choose Gray option) PDF* Secure PDF JPEG XPS (If you choose B&W option) PDF* Secure PDF TIFF 0.Network Reset—Reset —Exit Main menu Submenu Menu selections Options
Control panel setup 42 5 HL-2280DW, DCP-7070DW and MFC-7860DW5 Main menu Submenu Menu selections Options 4.Network (HL-2280DW and DCP-7070DW) 6.Network (MFC-7860DW)1.Wired LAN 1.TCP/IP 1.Boot Method Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.) 2.IP Address [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]*1 3.Subnet Mask[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]*1 4.Gateway[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 5.Node NameBRNxxxxxxxxxxxx (up to 32 characters) 6.WINS Config Auto* Static 7.WINS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 8.DNS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 9.APIPA On* Off 0.IPv6On Off*
Control panel setup 43 5 4.Network (HL-2280DW and DCP-7070DW) 6.Network (MFC-7860DW) (continued)1.Wired LAN (continued)2.Ethernet—Auto* 100B-FD 100B-HD 10B-FD 10B-HD 3.Wired Status—Active 100B-FD Active 100B-HD Active 10B-FD Active 10B-HD Inactive Wired OFF 4.MAC Address—— 5.Set to Default—Reset Exit 6.Wired Enable—On* Off 2.WLAN 1.TCP/IP 1.Boot Method Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.) 2.IP Address [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]*1 3.Subnet Mask[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]*1 4.Gateway[000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 5.Node NameBRWxxxxxxxxxxxx (up to 32 characters) 6.WINS Config Auto* Static Main menu Submenu Menu selections Options
Control panel setup 44 5 4.Network (HL-2280DW and DCP-7070DW) 6.Network (MFC-7860DW) (continued)2.WLAN (continued)1.TCP/IP (continued)7.WINS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 8.DNS ServerPrimary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* Secondary [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 9.APIPA On* Off 0.IPv6On Off* 2.Setup WizardOn Off— 3.WPS/AOSSOn Off— 4.WPS w/PIN CodeOn Off— 5.WLAN Status 1.StatusActive(11b) Active(11g) Wired LAN Active WLAN OFF AOSS Active Connection Fail 2.SignalSignal:Strong Signal:Medium Signal:Weak Signal:None 3.SSID— 4.Comm. ModeAd-hoc Infrastructure Main menu Submenu Menu selections Options
Control panel setup 45 5 1On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network. 4.Network (HL-2280DW and DCP-7070DW) 6.Network (MFC-7860DW) (continued)2.WLAN (continued)6.MAC Address—— 7.Set to Default—Reset Exit 8.WLAN Enable—On Off* 3.Scan To FTP (For MFC-7860DW) —Color 100 dpi* Color 200 dpi Color 300 dpi Color 600 dpi Gray 100 dpi Gray 200 dpi Gray 300 dpi B&W 200 dpi B&W 200x100 dpi (If you choose Color option) PDF* Secure PDF JPEG XPS (If you choose Gray option) PDF* Secure PDF JPEG XPS (If you choose B&W option) PDF* Secure PDF TIFF 0.Network Reset—Reset —Exit Main menu Submenu Menu selections Options