BenQ Gp10 Users Manual

Operation61
Menu system
Main menu Sub-menu Options
1. 
Basic
Language
LED Mode Normal/Eco
Wall ColorOff/Light Yellow/Pink/Light Green/
Blue/Blackboard
Auto Keystone On/Off
Eye Protection On/Off
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Splash Screen BenQ/ Black/Blue
2. 
Advanced
High Altitude Mode On/Off
Audio SettingsSRS HD On/Off
Mute On/Off
Vo l u m e
Power on/off ring 
toneOn/Off
Menu Display Time 5 sec/10 sec/15 sec/20 sec/25 sec/
30 sec
Security SettingsChange Password
Recall...

Operation 62
Description of each menu
FUNCTIONDESCRIPTION
Language
Sets the language for the On-Screen Display (OSD) menus.
LED Mode
Choose Eco to dim the projector LED which will lower power 
consumption, extend the LED life and reduce noise. Choose 
Normal to return normal mode.
Wall ColorCorrects the projected picture’s color when the projection surface is 
not white.
Auto 
Key s t o n eAuto corrects any keystoning of the image.
Eye 
Protection
When detecting something is in front of the projection...

Operation63
FUNCTIONDESCRIPTION
High Altitude 
Mode
A mode for operation in high altitude areas. See Operating in a high 
altitude environment on page 34for details.
Audio 
SettingsSee Adjusting the sound on page 34 for details.
Menu Display 
TimeSets the length of time the OSD will remain active after your last key 
press. The range is from 5 to 30 seconds in 5-second increments.
Security 
SettingsSee Securing the projector on page 29 for details.
Closed 
Caption
Closed Caption Enable
Activates the...

Operation 64
FUNCTIONDESCRIPTION
Source
Shows the current signal source.
Picture ModeShows the selected mode.
Color SystemShows input system format: RGB or YUV.
ResolutionShows the native resolution of the input signal.
Memory / 
Internal 
MemoryShows the memory capacity status: Internal Memory.
DLP 3D Shows the DLP 3D status.
LED Lamp 
LifeDisplays the number of hours the lamp has been used.
Firmware 
VersionShows firmware version.
3. Information menu
Downloaded From projector-manual.com BenQ Manuals 

Operation65
Shutting down the projector
1. Press Power and a confirmation message 
displays prompting you. 
If you dont respond in a few seconds, the 
message will disappear.
2. Press Power a second time. 
3. The Power LED indicator flashes orange 
slowly and fans stop.
4. Disconnect the power cord from the wall socket if the projector will not be used in 
an extended period of time.II
II
Downloaded From projector-manual.com BenQ Manuals 

Maintenance 66
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular basis 
is to keep the lens clean.
Never remove any parts of the projector. Contact your dealer if other parts need 
replacing.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface. 
• Use a canister of compressed air to remove dust. 
• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens 
cleaner and gently wipe...

Maintenance67
LED Indicators
Status / ProblemsLED indicatorsLED BehaviorPow e rFanTe m p
StandbyOrange 
solid onOff Off Power LED slow flash
Power warm upGreen 
blanking
Power on Green Off OffLight solid on sequence: 
Power
->Key->Ring & OK 
CoolingOrange 
blankingOff Off Power LED slow flash
Fan1 error Off On OffRing & OK LED flash first and 
then key LED flash (1.5 seconds 
interval)
Te m p  e r r o r O f f O f f O nRing & OK LED and Key LED 
flash at the same time (1.5 
seconds interval for LED...

Troubleshooting 68
Troubleshooting
The projector does not turn on.
No picture
Blurred image
Remote control does not work
The password is incorrect
CauseRemedy
There is no power from the power cable.Plug the AC adapter into the DC IN socket on the 
projector, plug the power cord into the AC inlet 
on the AC adapter, plug the power cord into the 
power outlet. If the power outlet has a switch, 
make sure that it is switched on.
Attempting to turn the projector on again 
during the cooling process.Wait...

Specifications69
Specifications
Projector specifications 
All specifications are subject to change without notice. 
General
Product name Ultra Lite LED Projector
Model name GP10
Optical
Resolution 1280 x 800 WXGA
Display system 1-CHIP DMD
Lens F/Number F = 1.65 
Lamp 3LED
Throw Ratio 1.2:1 (40@1m)
Electrical
Power supply AC100–240V, 50-60 Hz (Automatic)
Power consumption 125 W (Max.); < 0.5 W (Standby)
Keystone Adjustment 1D, Vertical +/- 30 degrees
Mechanical
Dimensions 220 mm (W) x 61.8 mm (H) x 177 mm...

Specifications 70
Dimensions
• Without DVD player : 220 mm (W) x 61.8 mm (H) x 177 mm (D)
• With DVD player : 220 mm (W) x 95.0 mm (H) x 177 mm (D)Operating relative 
humidity10%-90% (without condensation)
Operating altitude 0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with High Altitude Mode on)
62.281 177220 61.8
Unit: mm 95.0220
29
81
Downloaded From projector-manual.com BenQ Manuals