BenQ Gp10 Users Manual

Operation51
Using USB streaming
The projector supports USB streaming for USB display and USB file transfer.
BenQ EZ USB display
The projector can project computer screen via a USB cable instead of a VGA cable. 
To  u s e  U S B  d i s p l a y :
1. Connect the projector to a computer using a USB cable.
2. Turn on the power of the projector and your 
source device. The projector displays the home 
screen.
3. Press  /  to select USB Streaming.
4. Press  /  to select USB Display and then 
press OK to enter....

Operation 522. Turn on the power of the projector and your 
source device. The projector displays the home 
screen.
3. Press  /  to select USB Streaming.
4. Press  /  to select USB File Transfer and 
then press OK to enter.
5. If the connection is sucessful, you will see “It is 
in USB file transfer mode.” message on the 
screen.
6. Look for a new “removable disk” icon. This “removable disk” is actually the internal 
memory in your projector.
7. Copy & Paste or Drag-N-Drop files from your computer to the...

Operation53
Using wireless streaming
Display PC screen to projector wirelessly
BenQ EZ QPresenter is a power program to project your PC/NB screen to projector 
wirelessly. It also brings you extension display function so that you can show different 
content in the secondary display.
Follow the steps below to get it all set up in just a few minutes. 
1. Connect the wireless dongle to the USB jack of the projector.
2. Select “USB Drive/Wireless Streaming” by pressing    and press “OK” on 
your projector....

Operation 543. You will be prompted to the “To install BenQ EZ QPresenter” page and follow 
the steps as  instructed.
4. Select “BenQ GP10” as your 
WLAN connection on your 
computer (make sure your computer 
is equipped with wireless network 
card). 5. Start a web browser and key in IP 
address 192.168.100.10 into the 
address bar and press “Enter”. 
Downloaded From projector-manual.com BenQ Manuals 

Operation55 6. Select OS version and start downloading and installing BenQ EZ QPresenter by 
following the on-screen instructions on you PC.
 
7. Open BenQ EZ QPresenter to start wireless projection
i. Select “BenQ GP10” from wireless access point menu of your PC/NB.
ii. Open BenQ EZ QPresenter to start projection in mirror mode (default).
Tips:
• If you have installed BenQ EZ QPrensenter prior to step i., it will be connected 
to GP10 automatically.
• You can disable or enable audio streaming baed on...

Operation 56•  Q: Why does my display frame rate slow down?
•  A: BenQ EZ QPresenter needs to encode display content while sending massive real-
time data to the projector.
i. PC: A dual core PC (excluding Atom processors) or Mac is required to encode 
the screen images at 30FPS (Frame Per Second) speed. However, if you would 
like to increase the FPS speed, you can:
a. Use better media players, such as GOM player
b. Close all unused apps
c. Use a faster PC with Windows Experience Score higher than 4 (4+...

Operation57
Display iPhone/iPAD content to projector wirelessly
BenQ GP10 QPresenter is an easy-to-use app which enables your mobile devices to 
project the display to BenQ GP10 Ultra Lite LED projector. You can display your photos/
documents including PDF, MS-Office and iWorks. 
Follow the steps below to get it all set up in just a few minutes.
1. Connect the wireless dongle to the USB jack of the projector.
2. Select “USB Drive/Wireless Streaming” by pressing   and press “OK” on 
your projector. Choose...

Operation 584. Connect your iPhone or iPad to NB/PC. Open iTunes and sync the documents from 
NB/PC to your iPhone or iPad. After it’s done, you can disconnect your iPhone/iPad.
5. Turn on your iPhone/iPad WiFi , find BenQ GP10 or the projector SSID you defined 
to projector and connect with it directly. After WiFi connection is established, you 
can execute BenQ GP10 QPresenter app on your iPhone/iPad, and you will be able 
to see the device’s IP address now. Click it to enjoy BenQ GP10 QPresenter’s...

Operation59
Wi-Fi Dongle Specifications
Model Name WDRT8192
Wireless Standard IEEE 802.11 b/g/n
Interface USB 2.0
Data Transfer Rate up to 300Mbps
Frequency Band 2.4GHz ISM Band
Security 64 bit/128 bit WEP, TKIP, AES, WPA, WPA2
Supported OS Windows 2000/XP/Vista/7
Minimum PC System Requirement CPU: 200MHz or above
RAM: 64MB RAM or above, 128MB recommended
Downloaded From projector-manual.com BenQ Manuals 

Operation 60
Using settings menu
This menu is to set the projector’s operating environment.
Using the menu
1. To open the OSD menu, press  /  to select Settings icon in  home screen.
2. When the OSD is displayed, press  /  to select any item in the main menu.
3. After selecting the desired main menu item, press OK to enter the feature settings 
submenu.
4. Press  /  to select the desired item and press OK to open the pop-up menu.
5. Select the settings using  / / /  and press OK to confirm. Once the...