Beko Wml 15106 D Manual

							Washing Machine
Plně automatická pračka
Perilica rublja
Перална машинаWML 15126 P
WML 15106 P
WML 15106 D
WML 15106 PS
WML 15066 D
WML 15086 P 
						

							2EN
1  Important safety instructions
This section contains safety instructions that will 
help protect from risk of personal injury or property 
damage. Failure to follow these instructions shall 
void any warranty.
General safety•	 This 	product 	should 	not 	be 	used 	by 	persons	
with physical, sensory or mental disorders or 
unlearned or inexperienced people (including 
children) 	unless 	they 	are 	attended 	by 	a 	person	
who 	will 	be 	responsible 	for 	their 	safety 	or 	who	
will instruct them accordingly for use of the 
product.
•	 Never 	place 	the 	product 	on 	a 	carpet-covered	
floor; 	otherwise, 	lack 	of 	airflow 	beneath 	the	
machine will cause electrical parts to overheat. 
This 	will 	cause 	problems 	with 	your 	product.
•	 Do 	not 	operate 	the 	product 	if 	the 	power 	cable	
/ plug is damaged. Call the Authorized Service 
Agent.
•	 Have 	a 	qualified 	electrician 	connect 	a	
16-Ampere 	fuse 	to 	the 	installation 	location 	of	
the product.
•	 If 	the 	product 	has 	a 	failure, 	it 	should 	not	
be 	operated 	unless 	it 	is 	repaired 	by 	the	
Authorized Service Agent. There is the risk of 
electric shock!
•	 This 	product 	is 	designed 	to 	resume 	operating	
in the event of powering on after a power 
interruption. 	If 	you 	wish 	to 	cancel 	the	
programme, see "Cancelling the programme" 
section.
•	 Connect 	the 	product 	to 	a 	grounded 	outlet	
protected 	by 	a 	fuse 	complying 	with 	the 	values	
in 	the 	"Technical 	specifications" 	table. 	Do 	not	
neglect to have the grounding installation 
made 	by 	a 	qualified 	electrician. 	Our 	company	
shall 	not 	be 	liable 	for 	any 	damages 	that	
will arise when the product is used without 
grounding in accordance with the local 
regulations.
•	 The 	water 	supply 	and 	draining 	hoses 	must 	be	
securely fastened and remain undamaged. 
Otherwise, 	there 	is 	the 	risk 	of 	water 	leakage.
•	 Never 	open 	the 	loading 	door 	or 	remove 	the	
filter while there is still water in the drum. 
Otherwise, 	risk 	of 	flooding 	and 	injury 	from 	hot	
water will occur.
•	 Do 	not 	force 	open 	the 	locked 	loading 	door.	
The 	loading 	door 	will 	be 	ready 	to 	open 	just 	a	
few minutes after the washing cycle comes to 
an 	end. 	In 	case 	of 	forcing 	the 	loading 	door 	to	
open, the door and the lock mechanism may 
get damaged.
•	 Unplug 	the 	product 	when 	not 	in 	use.
•	 Never 	wash 	the 	product 	by 	spreading 	or	
pouring water onto it! There is the risk of 
electric shock!
•	 Never 	touch 	the 	plug 	with 	wet 	hands! 	Never	
unplug 	by 	pulling 	on 	the 	cable, 	always 	pull 	out	
by 	grabbing 	the 	plug. •	 Use
	detergents, 	softeners 	and 	supplements	
suitable 	for 	automatic 	washing 	machines 	only.
•	 Follow 	the 	instructions 	on 	the 	textile 	tags 	and	
on the detergent package.
•	 The 	product 	must 	be 	unplugged 	during	
installation, maintenance, cleaning and 
repairing procedures.
•	 Always 	have 	the 	installation 	and 	repairing	
procedures 	carried 	out 	by 	the 	Authorized	
Service 	Agent. 	Manufacturer 	shall 	not 	be	
held 	liable 	for 	damages 	that 	may 	arise 	from	
procedures 	carried 	out 	by 	unauthorized	
persons.
Intended use•	 This 	product 	has 	been 	designed 	for 	domestic	
use. 	It 	is 	not 	suitable 	for 	commercial 	use 	and 	it	
must 	not 	be 	used 	out 	of 	its 	intended 	use.
•	 The 	product 	must 	only 	be 	used 	for 	washing	
and rinsing of laundry that are marked 
accordingly.
•	 The 	manufacturer 	waives 	any 	responsibility	
arisen from incorrect usage or transportation.
Children's safety•	 Electrical 	products 	are 	dangerous 	for 	the	
children. Keep children away from the product 
when 	it 	is 	in 	use. 	Do 	not 	let 	them 	to 	tamper	
with 	the 	product. 	Use 	child 	lock 	to 	prevent	
children from intervening with the product. 
•	 Do 	not 	forget 	to 	close 	the 	loading 	door 	when	
leaving the room where the product is located.
•	 Store 	all 	detergents 	and 	additives 	in 	a 	safe	
place away from the reach of the children.
2   Installation
Refer to the nearest Authorised Service Agent for 
installation of the product. To make the product 
ready for use, review the information in the user 
manual and make sure that the electricity, tap 
water supply and water drainage systems are 
appropriate 	before 	calling 	the 	Authorized 	Service	
Agent. 	If 	they 	are 	not, 	call 	a 	qualified 	technician	
and 	plumber 	to 	have 	any 	necessary 	arrangements	
carried out.
C  Preparation of the location and electrical, 
tap water and waste water installations at 
the place of installation is under customer's 
responsibility.	
B	 Installation 	and 	electrical 	connections 	of 	the	
product 	must 	be 	carried 	out 	by 	the 	Authorized	
Service 	Agent. 	Manufacturer 	shall 	not 	be	
held 	liable 	for 	damages 	that 	may 	arise 	from	
procedures 	carried 	out 	by 	unauthorized	
persons.
A  Prior to installation, visually check if the 
product 	has 	any 	defects 	on 	it. 	If 	so, 	do 	not	
have 	it 	installed. 	Damaged 	products 	cause	
risks for your safety.
C  Make sure that the water inlet and discharge 
hoses 	as 	well 	as 	the 	power 	cable 	are 	not	
folded, pinched or crushed while pushing   
						

							3EN
the product into its place after installation or 
cleaning procedures.
Appropriate installation location•	 Place	the 	machine 	on 	a 	rigid 	floor. 	Do 	not	
place it on a long pile rug or similar surfaces.
•	 Total 	weight 	of 	the 	washing 	machine 	and 	the	
dryer 	-with 	full 	load- 	when 	they 	are 	placed	
on top of each other reaches to approx. 
180 kilograms. Place the product on a solid 
and flat floor that has sufficient load carrying 
capacity!
•	 Do 	not 	place 	the 	product 	on 	the 	power 	cable.
•	 Do 	not 	install 	the 	product 	at 	places 	where	
temperature 	may 	fall 	below 	0ºC.
•	 Place 	the 	product 	at 	least 	1 	cm 	away 	from 	the	
edges of other furniture.
Removing packaging reinforcementTilt 	the 	machine 	backwards 	to 	remove 	the	
packaging reinforcement. Remove the packaging 
reinforcement 	by 	pulling 	the 	ribbon.
Removing the transportation locks
A	 Do 	not 	remove 	the 	transportation 	locks 	before	
taking out the packaging reinforcement.
A	 Remove 	the 	transportation 	safety 	bolts 	before	
operating the washing machine, otherwise, 
the 	product 	will 	be 	damaged.
1.	 Loosen 	all 	the 	bolts 	with 	a 	spanner 	until 	they	
rotate freely (C).
2.	 Remove 	transportation 	safety 	bolts 	by 	turning	
them gently.
3.	 Attach 	the 	plastic 	covers 	supplied 	in 	the 	User	
Manual 	bag 	into 	the 	holes 	on 	the 	rear 	panel.	
(P)
C	 Keep 	the 	transportation 	safety 	bolts 	in 	a 	safe	
place to reuse when the washing machine 
needs 	to 	be 	moved 	again 	in 	the 	future.
C  Never move the product without the 
transportation 	safety 	bolts 	properly 	fixed 	in	
place!
Connecting water supply
C	 The 	water 	supply 	pressure 	required 	to 	run	
the 	product 	is 	between 	1 	to 	10 	bars 	(0.1 	– 	10	
MPa). 	It 	is 	necessary 	to 	have 	10 	– 	80 	liters 	of	
water flowing from the fully open tap in one 
minute to have your machine run smoothly. 
Attach a pressure reducing valve if water 
pressure is higher.
C	 If 	you 	are 	going 	to 	use 	the 	double 	water-inlet	
product 	as 	a 	single 	(cold) 	water-inlet 	unit, 	you	
must install the supplied stopper to the hot 
water 	valve 	before 	operating 	the 	product.	
(Applies 	for 	the 	products 	supplied 	with 	a 	blind	
stopper group.)
C	 If 	you 	want 	to 	use 	both 	water 	inlets 	of 	the	
product, connect the hot water hose after 
removing the stopper and gasket group from  the hot water valve. (Applies for the products 
supplied
	with 	a 	blind 	stopper 	group.)
A  Models with a single water inlet should not 
be 	connected 	to 	the 	hot 	water 	tap. 	In 	such	
a case the laundry will get damaged or the 
product will switch to protection mode and will 
not operate.
A	 Do 	not 	use 	old 	or 	used 	water 	inlet 	hoses 	on	
the 	new 	product. 	It 	may 	cause 	stains 	on 	your	
laundry.
1.   Connect the special hoses supplied with the 
product to the water inlets on the product. 
Red 	hose 	(left) 	(max. 	90 	ºC) 	is 	for 	hot 	water	
inlet, 	blue 	hose 	(right) 	(max. 	25 	ºC) 	is 	for 	cold	
water inlet.
A  Ensure that the cold and hot water 
connections are made correctly when 
installing 	the 	product. 	Otherwise, 	your 	laundry	
will come out hot at the end of the washing 
process and wear out.
2.	 Tighten 	all 	hose 	nuts 	by 	hand. 	Never 	use 	a	
wrench when tightening the nuts.
3.	 Open 	the 	taps 	completely 	after 	making 	the	
hose connection to check for water leaks at 
the 	connection 	points. 	If 	any 	leaks 	occur, 	turn	
off the tap and remove the nut. Retighten 
the nut carefully after checking the seal. To 
prevent water leakages and damages caused 
by 	them, 	keep 	the 	taps 	closed 	when 	the	
machine is not in use.
Connecting to the drain•	 The 	end 	of 	the 	drain 	hose 	must 	be 	directly	
connected to the wastewater drain or to the 
washbasin.	
A	 Your 	house 	will 	be 	flooded 	if 	the 	hose 	comes	
out of its housing during water discharge. 
Moreover, there is risk of scalding due to 
high washing temperatures! To prevent such 
situations and to ensure smooth water intake 
and discharge of the machine, fix the end of 
the discharge hose tightly so that it cannot   
						

							4EN
come out. 
•	 The 	hose 	should 	be 	attached 	to 	a 	height 	of 	at	
least 40 cm, and 100 cm at most.
•	 In 	case 	the 	hose 	is 	elevated 	after 	laying 	it 	on	
the floor level or close to the ground (less than 
40 	cm 	above 	the 	ground), 	water 	discharge	
becomes 	more 	difficult 	and 	the 	laundry 	may	
come out excessively wet. Therefore, follow 
the 	heights 	described 	in 	the 	figure.
•	 To 	prevent 	flowing 	of 	dirty 	water 	back 	into 	the	
machine and to allow for easy discharge, do 
not immerse the hose end into the dirty water 
or 	drive 	it 	in 	the 	drain 	more 	than 	15 	cm. 	If 	it 	is	
too long, cut it short.
•	 The 	end 	of 	the 	hose 	should 	not 	be 	bent, 	it	
should 	not 	be 	stepped 	on 	and 	the 	hose 	must	
not 	be 	pinched 	between 	the 	drain 	and 	the	
machine.
•	 If 	the 	length 	of 	the 	hose 	is 	too 	short, 	use 	it	
by 	adding 	an 	original 	extension 	hose. 	Length	
of 	the 	hose 	may 	not 	be 	longer 	than 	3.2 	m.	
To avoid water leak failures, the connection 
between 	the 	extension 	hose 	and 	the 	drain	
hose 	of 	the 	product 	must 	be 	fitted 	well 	with	
an appropriate clamp as not to come off and 
leak.
Adjusting the feet
A	 In 	order 	to 	ensure 	that 	the 	product 	operates	
more 	silent 	and 	vibration-free, 	it 	must 	stand	
level 	and 	balanced 	on 	its 	feet. 		Balance 	the	
machine 	by 	adjusting 	the 	feet. 	Otherwise, 	the	
product may move from its place and cause 
crushing 	and 	vibration 	problems.
1.	 Loosen 	the 	lock 	nuts 	on 	the 	feet 	by 	hand.
2.   Adjust the feet until the product stands level 
and 	balanced.
3.	 Tighten 	all 	lock 	nuts 	again 	by 	hand.
A	 Do 	not 	use 	any 	tools 	to 	loosen 	the 	lock 	nuts.	
Otherwise, 	they 	will 	get 	damaged.
Electrical connectionConnect the product to a grounded outlet 
protected 	by 	a 	fuse 	complying 	with 	the 	values 	in	
the 	"Technical 	specifications" 	table. 	Our 	company	
shall 	not 	be 	liable 	for 	any 	damages 	that 	will 	arise	
when the product is used without grounding in 
accordance with the local regulations.
•	 Connection 	must 	comply 	with 	national	
regulations.
•	 Power 	cable 	plug 	must 	be 	within 	easy 	reach	
after installation.
•	 The 	voltage 	and 	allowed 	fuse 	or 	breaker	
protection are specified in the “Technical 
specifications” 	section. 	If 	the 	current 	value 	of	
the 	fuse 	or 	breaker 	in 	the 	house 	is 	less 	than	
16 	Amps, 	have 	a 	qualified 	electrician 	install 	a	
16 Amp fuse.
•	 The 	specified 	voltage 	must 	be 	equal 	to 	your	
mains voltage.
•	 Do 	not 	make 	connections 	via 	extension	
cables 	or 	multi-plugs.
B	 Damaged 	power 	cables 	must 	be 	replaced 	by	
the Authorized Service Agents.
First useBefore 	starting 	to 	use 	the 	product, 	make 	sure	
that all preparations are made in accordance 
with 	the 	instructions 	in 	sections 	"Important 	safety	
instructions" 	and 	"Installation".
To prepare the product for washing laundry, 
perform 	first 	operation 	in 	Drum 	Cleaning	
programme. 	If 	your 	machine 	is 	not 	featured 	with	
Drum 	Cleaning 	programme, 	use 	Cottons-90	
programme and select Additional Water or Extra 
Rinse 	auxiliary 	functions 	as 	well. 	Before 	starting	
the programme, put max. 100 g of powder 
anti-limescale 	into 	the 	main 	wash 	detergent	
compartment 	(compartment 	nr. 	II). 	If 	the 	anti-
limescale 	is 	in 	tablet 	form, 	put 	only 	one 	tablet 	into	
compartment 	nr. 	II. 	Dry 	the 	inside 	of 	the 	bellow	
with a clean piece of cloth after the programme 
has come to an end.    
						

							5EN
C	 Use	an 	anti-limescale 	suitable 	for 	the 	washing	
machines.
C  Some water might have remained in the 
product 	due 	to 	the 	quality 	control 	processes	
in 	the 	production. 	It 	is 	not 	harmful 	for 	the	
product.
Disposing of packaging materialPackaging materials are dangerous to children. 
Keep packaging materials in a safe place away 
from reach of the children.
Packaging materials of the product are 
manufactured 	from 	recyclable 	materials. 	Dispose	
of them properly and sort in accordance with 
recycled 	waste 	instructions. 	Do 	not 	dispose 	of	
them with normal domestic waste.
Transportation of the productUnplug 	the 	product 	before 	transporting 	it. 	Remove	
water 	drain 	and 	water 	supply 	connections. 	Drain	
the remaining water in the product completely; 
see, 	"Draining 	remaining 	water 	and 	cleaning 	the	
pump 	filter". 	Install 	transportation 	safety 	bolts	
in the reverse order of removal procedure; see, 
"Removing the transportation locks".
C  Never move the product without the 
transportation 	safety 	bolts 	properly 	fixed 	in	
place!
Disposing of the old productDispose 	of 	the 	old 	product 	in 	an 	environmentally	
friendly manner.
Refer to your local dealer or solid waste collection 
centre in your area to learn how to dispose of your 
product.
For 	children's 	safety, 	cut 	the 	power 	cable 	and	
break 	the 	locking 	mechanism 	of 	the 	loading 	door	
so 	that 	it 	will 	be 	nonfunctional 	before 	disposing 	of	
the product.
3   Preparation
Things to be done for energy savingFollowing information will help you use the product 
in	an 	ecological 	and 	energy-efficient 	manner.
•	 Operate 	the 	product 	in 	the 	highest 	capacity	
allowed 	by 	the 	programme 	you 	have 	selected,	
but 	do 	not 	overload; 	see, 	"Programme 	and	
consumption 	table".
•	 Always 	follow 	the 	instructions 	on 	the	
detergent packaging.
•	 Wash 	slightly 	soiled 	laundry 	at 	low	
temperatures.
•	 Use 	faster 	programmes 	for 	small 	quantities 	of	
lightly soiled laundry.
•	 Do 	not 	use 	prewash 	and 	high 	temperatures	
for laundry that is not heavily soiled or stained.
•	 If 	you 	plan 	to 	dry 	your 	laundry 	in 	a 	dryer, 	select	
the highest spin speed recommended during 
washing process. 
•	 Do 	not 	use 	detergent 	in 	excess 	of 	the 	amount	
recommended on the detergent package.
Sorting the laundry•	 Sort 	laundry 	according 	to 	type 	of 	fabric,	
colour, 	and 	degree 	of 	soiling 	and 	allowable	
water temperature.
•	 Always 	obey 	the 	instructions 	given 	on 	the	
garment tags.
Preparing laundry for washing•	 Laundry 	items 	with 	metal 	attachments 	such	
as, 	underwired 	bras, 	belt 	buckles 	or 	metal	
buttons 	will 	damage 	the 	machine. 	Remove	
the 	metal 	pieces 	or 	wash 	the 	clothes 	by	
putting 	them 	in 	a 	laundry 	bag 	or 	pillow 	case.
• 		 Take 	out 	all 	substances 	in 	the 	pockets 	such	
as coins, pens and paper clips, and turn 
pockets 	inside 	out 	and 	brush. 	Such 	objects	
may damage the product or cause noise 
problem.
•	 Put 	small 	size 	clothes 	such 	as 	infant's 	socks	
and 	nylon 	stockings 	in 	a 	laundry 	bag 	or 	pillow	
case.
•	 Place 	curtains 	in 	without 	compressing 	them.	
Remove curtain attachment items.
•	 Fasten 	zippers, 	sew 	loose 	buttons 	and 	mend	
rips and tears.
•	 Wash 	“machine 	washable” 	or 	“hand	
washable” 	labeled 	products 	only 	with 	an	
appropriate programme.
•	 Do 	not 	wash 	colours 	and 	whites 	together.	
New, dark coloured cottons release a lot of 
dye. Wash them separately.
•	 Tough 	stains 	must 	be 	treated 	properly 	before	
washing. 	If 	unsure, 	check 	with 	a 	dry 	cleaner.
•	 Use 	only 	dyes/colour 	changers 	and 	limescale	
removers 	suitable 	for 	machine 	wash. 	Always	
follow the instructions on the package.
•	 Wash 	trousers 	and 	delicate 	laundry 	turned	
inside out.
•	 Keep 	laundry 	items 	made 	of 	Angora 	wool 	in	
the 	freezer 	for 	a 	few 	hours 	before 	washing.	  
						

							6EN
This will reduce pilling.
•	 Laundry 	that 	are 	subjected 	to 	materials 	such	
as flour, lime dust, milk powder, etc. intensely 
must 	be 	shaken 	off 	before 	placing 	into 	the	
machine. Such dusts and powders on the 
laundry 	may 	build 	up 	on 	the 	inner 	parts 	of 	the	
machine in time and can cause damage.
Correct load capacityThe maximum load capacity depends on the type 
of laundry, the degree of soiling and the washing 
programme desired.
The machine automatically adjusts the amount 
of water according to the weight of the loaded 
laundry.
A  Follow the information in the “Programme 
and 	consumption 	table”. 	When 	overloaded,	
machine's washing performance will drop. 
Moreover, 	noise 	and 	vibration 	problems 	may	
occur.
Loading the laundry•	 Open 	the 	loading 	door.
•	 Place 	laundry 	items 	loosely 	into 	the 	machine.
•	 Push 	the 	loading 	door 	to 	close 	until 	you 	hear	
a locking sound. Ensure that no items are 
caught in the door.
C  The loading door is locked while a programme 
is	running. 	The 	door 	can 	only 	be 	opened 	a	
while after the programme comes to an end.
A	 In 	case 	of 	misplacing 	the 	laundry, 	noise 	and	
vibration 	problems 	may 	occur 	in 	the 	machine.
Using detergent and softenerDetergent Drawer
The detergent drawer is composed of three 
compartments:
- 	(I) 	for 	prewash
- 	(II) 	for 	main 	wash
– 	(III) 	for 	softener
– 	(*) 	in 	addition, 	there 	is 	siphon 	piece 	in 	the	
softener compartment.
C  The 	detergent 	dispenser 	may 	be 	in 	two	
different types according to the model of your 
machine 	as 	seen 	above.
Detergent, softener and other cleaning agents
•	 Add 	detergent 	and 	softener 	before 	starting 	the	
washing programme.
•	 Never 	open 	the 	detergent 	drawer 	while 	the	
washing programme is running!
•	 When 	using 	a 	programme 	without 	prewash,	
do not put any detergent into the prewash 
compartment 	(compartment 	nr. 	I).	
•	 In 	a 	programme 	with 	prewash, 	do 	not	
put 	liquid 	detergent 	into 	the 	prewash	 compartment
	(compartment 	nr. 	I).
•	 Do 	not 	select 	a 	programme 	with 	prewash 	if	
you 	are 	using 	a 	detergent 	bag 	or 	dispensing	
ball. 	Place 	the 	detergent 	bag 	or 	the	
dispensing 	ball 	directly 	among 	the 	laundry 	in	
the machine.
•	 If 	you 	are 	using 	liquid 	detergent, 	do 	not 	forget	
to 	place 	the 	liquid 	detergent 	cup 	into 	the 	main	
wash 	compartment 	(compartment 	nr. 	II).
Choosing the detergent type
The 	type 	of 	detergent 	to 	be 	used 	depends 	on 	the	
type 	and 	colour 	of 	the 	fabric.
•	 Use 	different 	detergents 	for 	coloured 	and	
white laundry.
•	 Wash 	your 	delicate 	clothes 	only 	with 	special	
detergents 	(liquid 	detergent, 	wool 	shampoo,	
etc.) used solely for delicate clothes. 
•	 When 	washing 	dark 	coloured 	clothes 	and	
quilts, 	it 	is 	recommended 	to 	use 	liquid	
detergent.
•	 Wash 	woolens 	with 	special 	detergent 	made	
specifically for woolens.
A	 Use 	only 	detergents 	manufactured 	specifically	
for washing machines.
A	 Do 	not 	use 	soap 	powder.
Adjusting detergent amount
The 	amount 	of 	washing 	detergent 	to 	be 	used	
depends on the amount of laundry, the degree 
of soiling and water hardness. Read the 
manufacturer's instructions on the detergent 
package carefully and follow the dosage values.
•	 Do 	not 	use 	amounts 	exceeding 	the 	dosage	
quantities 	recommended 	on 	the 	detergent	
package 	to 	avoid 	problems 	of 	excessive	
foam, poor rinsing, financial savings and finally, 
environmental protection.
•	 Use 	lesser 	detergent 	for 	small 	amounts 	or	
lightly soiled clothes.
•	 Use 	concentrated 	detergents 	in 	the	
recommended dosage.
Using softeners
Pour the softener into the softener compartment of 
the detergent drawer.
• 		 Use 	the 	dosages 	recommended 	on 	the	
package.
• 		 Do 	not 	exceed 	the 	(>max
						

							7EN
 If the product does not contain a liquid 
detergent cup:
•	 Do	not 	use 	liquid 	detergent 	for 	the 	prewash 	in	
a programme with prewash.
•	 Use 	the 	detergent 	manufacturer's 	measuring	
cup and follow the instructions on the 
package.
•	 Liquid 	detergent 	stains 	your 	clothes 	when	
used 	with 	Delayed 	Start 	function. 	If 	you 	are	
going 	to 	use 	the 	Delayed 	Start 	function, 	do	
not 	use 	liquid 	detergent.
Using gel and tablet detergent
When 	using 	tablet, 	gel, 	etc. 	detergents, 	read	
the manufacturer's instructions on the detergent 
package 	carefully 	and 	follow 	the 	dosage 	values. 	If	
there is not any instruction on the package, apply 
the following.
•	 If 	the 	gel 	detergent 	thickness 	is 	fluidal 	and	
your 	machine 	does 	not 	contain 	a 	special 	liquid	
detergent cup, put the gel detergent into the 
main wash detergent compartment during first 
water 	intake. 	If 	your 	machine 	contains 	a 	liquid	
detergent cup, fill the detergent into this cup 
before 	starting 	the 	programme.
•	 If 	the 	gel 	detergent 	thickness 	is 	not 	fluidal 	or	
in 	the 	shape 	of 	capsule 	liquid 	tablet, 	put 	it	
directly 	into 	the 	drum 	before 	washing.
•	 Put 	tablet 	detergents 	into 	the 	main 	wash	
compartment 	(compartment 	nr. 	II) 	or 	directly	
into 	the 	drum 	before 	washing.
C	 Tablet 	detergents 	may 	leave 	residues 	in 	the	
detergent 	compartment. 	If 	you 	encounter	
such 	a 	case, 	place 	the 	tablet 	detergent	
between 	the 	laundry, 	close 	to 	the 	lower 	part 	of	
the drum in future washings.
C	 Use 	the 	tablet 	or 	gel 	detergent 	without	
selecting the prewash function.
Using starch
•	 Add 	liquid 	starch, 	powder 	starch 	or 	the	
dyestuff into the softener compartment as 
instructed on the package.
•	 Do 	not 	use 	softener 	and 	starch 	together 	in 	a	
washing cycle.
•	 Wipe 	the 	inside 	of 	the 	machine 	with 	a 	damp	
and clean cloth after using starch.
Using bleaches
•	 Select 	a 	programme 	with 	prewash 	and 	add	
the 	bleaching 	agent 	at 	the 	beginning 	of 	the	
prewash. 	Do 	not 	put 	detergent 	in 	the 	prewash	
compartment. As an alternative application, 
select a programme with extra rinse and add 
the 	bleaching 	agent 	while 	the 	machine 	is	
taking water from the detergent compartment 
during first rinsing step. •	 Do
	not 	use 	bleaching 	agent 	and 	detergent 	by	
mixing them.
•	 Use 	just 	a 	little 	amount 	(approx. 	50 	ml) 	of	
bleaching 	agent 	and 	rinse 	the 	clothes 	very	
well 	as 	it 	causes 	skin 	irritation. 	Do 	not 	pour 	the	
bleaching 	agent 	onto 	the 	clothes 	and 	do 	not	
use it for coloured clothes. 
•	 When 	using 	oxygen 	based 	bleaches,	
follow the instructions on the package and 
select a programme that washes at a lower 
temperature. 
•	 Oxygen 	based 	bleaches 	can 	be 	used 	together	
with detergents; however, if its thickness is 
not the same with the detergent, put the 
detergent 	first 	into 	the 	compartment 	nr. 	"II"	
in the detergent drawer and wait until the 
detergent flows while the machine is taking in 
water. 	Add 	the 	bleaching 	agent 	from 	the 	same	
compartment while the machine is still taking 
in water.
Using limescale remover
• 		 When 	required, 	use 	limescale 	removers	
manufactured specifically for washing 
machines only. 
• 		 Always 	follow 	instructions 	on 	the 	package.  
						

							8EN
Tips for efficient washing
Clothes
Light colours and  whites Colors
Dark colors Delicates/
Woolens/Silks
(Recommended 
temperature range 
based on soiling 
level: 40-90C) (Recommended 
temperature range 
based on soiling level: 
cold-40C) (Recommended 
temperature 
range based on 
soiling level: cold-
40C)(Recommended 
temperature 
range based 
on soiling level: 
cold-30C)
Soiling Level
Heavily Soiled
(difficult stains 
such as grass, 
coffee, fruits 
and blood.)
It may be necessary 
to pre-treat the 
stains of perform 
prewash. Powder 
and liquid detergents 
recommended 
for whites can be 
used at dosages 
recommended for 
heavily soiled clothes. 
It is recommended 
to use powder 
detergents to clean 
clay and soil stains 
and the stains that 
are sensitive to 
bleaches.  Powder and 
liquid detergents 
recommended for 
colours can be 
used at dosages 
recommended for 
heavily soiled clothes. 
It is recommended 
to use powder 
detergents to clean 
clay and soil stains 
and the stains that are 
sensitive to bleaches. 
Use detergents 
without bleach.
Liquid detergents 
suitable for 
colours and dark 
colours can be 
used at dosages 
recommended 
for heavily soiled 
clothes.
Prefer liquid 
detergents 
produced for 
delicate clothes. 
Woollen and silk 
clothes must 
be washed with 
special woollen 
detergents.
Normally 
Soiled
(For example, 
stains caused 
by body on 
collars and 
cuffs)Powder and 
liquid detergents 
recommended 
for whites can be 
used at dosages 
recommended 
for normally soiled 
clothes. Powder and 
liquid detergents 
recommended for 
colours can be 
used at dosages 
recommended for 
normally soiled clothes. 
Use detergents 
without bleach. Liquid detergents 
suitable for 
colours and dark 
colours can be 
used at dosages 
recommended 
for normally 
soiled clothes. Prefer liquid 
detergents 
produced for 
delicate clothes. 
Woollen and silk 
clothes must 
be washed with 
special woollen 
detergents.
Lightly Soiled
(No visible 
stains exist.)
Powder and 
liquid detergents 
recommended 
for whites can be 
used at dosages 
recommended for 
lightly soiled clothes.
Powder and 
liquid detergents 
recommended for 
colours can be 
used at dosages 
recommended for 
lightly soiled clothes. 
Use detergents 
without bleach. Liquid detergents 
suitable for 
colours and dark 
colours can be 
used at dosages 
recommended 
for lightly soiled 
clothes.Prefer liquid 
detergents 
produced for 
delicate clothes. 
Woollen and silk 
clothes must 
be washed with 
special woollen 
detergents.  
						

							9EN
4  Operating the product
Control panel
1	- 	Programme 	Selection 	knob
2 	- 	Spin 	Speed 	Adjustment 	button*
3 	- 	Temperature 	Adjustment 	button*
4 	- 	Start 	/ 	Pause 	/ 	Cancel 	button
5 	- 	Auxiliary 	Function 	buttons 6
	- 	On 	/ 	Off 	button
7 	- 	Programme 	Follow-up 	indicator
8 	- 	Loading 	Door 	light*
* 	Varies 	depending 	on 	the 	model 	of 	your 	machine.
Preparing the machineMake sure that the hoses are connected tightly. 
Plug in your machine. Turn the tap on completely. 
Place the laundry in the machine. Add detergent 
and 	fabric 	softener.	
Programme selectionSelect 	the 	programme 	suitable 	for 	the 	type,	
quantity 	and 	soiling 	degree 	of 	the 	laundry	
in accordance with the "Programme and 
consumption 	table" 	and 	the 	temperature 	table	
below.
90˚C  Heavily
	soiled 	white 	cottons	
and 	linens. 	(coffee 	table 	covers,	
tableclothes, 	towels, 	bed 	sheets,	
etc.)
60˚C  Normally soiled, coloured, fade proof 
cottons or synthetic clothes (shirt, 
nightgown, pajamas, etc.) and lightly 
soiled white linens (underwear, etc.)
40˚C-
30˚C-	
Cold  Blended
	laundry 	including 	delicate	
textile (veil curtains, etc.), synthetics 
and woolens.
Select the desired programme with the Programme 
Selection 	button.
C  Programmes are limited with the highest spin 
speed appropriate for that particular type of 
fabric.
C When selecting a programme, always 
consider 	the 	type 	of 	fabric, 	colour, 	degree 	of	
soiling 	and 	permissible 	water 	temperature.
C	 Always 	select 	the 	lowest 	required	
temperature. 	Higher 	temperature 	means	
higher power consumption.
C  For further programme details, see 
"Programme 	and 	consumption 	table".
Main programmes Depending 	on 	the 	type 	of 	fabric, 	use 	the 	following	
main programmes.
• Cottons
You 	may 	wash 	your 	normally 	soiled 	durable 	cotton	
and linen laundry in this programme with the 
highest energy and water saving compared to 
all 	other 	wash 	programmes 	suitable 	for 	cottons.	
Actual water temperature may differ from the 
declared cycle temperature. Programme duration 
may 	automatically 	be 	shortened 	during 	later 	stages	
of the programme if you wash less amount (e.g. ½ 
capacity 	or 	less) 	of 	laundry. 	In 	this 	case 	energy 	and	
water 	consumption 	will 	be 	further 	decreased 	giving	
you the opportunity for a more economical wash. 
This 	feature 	is 	available 	for 	certain 	models 	having	
remaining time display.
• Synthetics
Use 	this 	programme 	to 	wash 	your 	synthetic	
clothes 	(shirts, 	blouses, 	synthetic/cotton 	blends,	
etc.). 	It 	washes 	with 	a 	gentle 	action 	and 	has 	a	
shorter washing cycle compared to the Cottons 
15
4
7
8
62  
						

							10EN
programme.
For curtains and tulle, use the Synthetic 40˚C 
programme with prewash function selected. As 
their meshed texture causes excessive foaming, 
wash	the 	veils/tulle 	by 	putting 	little 	amount 	of	
detergent 	into 	the 	main 	wash 	compartment. 	Do	
not put detergent in the prewash compartment.
• Woollens
Use 	this 	programme 	to 	wash 	your 	woolen 	clothes.	
Select the appropriate temperature complying 
with 	the 	tags 	of 	your 	clothes. 	Use 	appropriate	
detergents for woolens.
Additional programmes 
For special cases, additional programmes are 
available 	in 	the 	machine.
C  Additional programmes may differ according 
to the model of the machine.
• Delicate
Use 	this 	programme 	to 	wash 	your 	delicate 	clothes.	
It 	washes 	with 	a 	gentle 	action 	without 	any 	interim	
spin compared to the Synthetics programme.
• Hand wash
Use 	this 	programme 	to 	wash 	your 	woolen/delicate	
clothes 	that 	bear 	“not 	machine- 	washable” 	tags	
and 	for 	which 	hand 	wash 	is 	recommended. 	It	
washes laundry with a very gentle washing action 
to not to damage clothes.
• Mini
Use 	this 	programme 	to 	wash 	your 	little 	amount	
of lightly soiled cotton clothes in a short time (30 
minutes).
• Super
Use 	this 	programme 	to 	wash 	your 	laundry 	for	
which you cannot use Cottons 60 °C programme. 
It 	gives 	the 	same 	result 	with 	the 	Cottons 	60 	°C	
programme 	by 	washing 	for 	a 	longer 	time 	at 	40 	°C,	
thus 	enabling 	energy 	saving.	
Special programmes
For specific applications, select any of the following 
programmes.
• Rinse
Use 	this 	programme 	when 	you 	want 	to 	rinse 	or	
starch separately.
• Spin + Drain
Use 	this 	programme 	to 	apply 	an 	additional 	spin	
cycle for your laundry or to drain the water in the 
machine.
Before 	selecting 	this 	programme, 	select 	the	
desired spin speed and press Start / Pause / 
Cancel 	button. 	First, 	the 	machine 	will 	drain 	the	
water inside of it. Then, it will spin the laundry with 
the set spin speed and drain the water coming out 
of them.
If 	you 	wish 	to 	drain 	water 	only 	without 	spinning	
your laundry, select the Pump+Spin programme 
and then select the "No Spin" function with the 
help 	of 	Spin 	Speed 	Adjustment 	button 	depending	
on the model of your machine and press Start / 
Pause 	button.
C	 If 	your 	machine 	is 	not 	equipped 	with 	Spin	
Speed 	Adjustment 	button 	and 	No 	Spin	 auxiliary function and if you wish to drain the 
water only without spinning your laundry, 
select the Pump+Spin programme and press 
Start
	/ 	Pause 	button. 	Machine 	will 	switch	
to spin step once it completes pump step. 
Press 	Start 	/ 	Pause 	/ 	Cancel 	button 	to 	stop	
the machine as soon as you see the drum 
rotating.
C	 Use 	a 	lower 	spin 	speed 	for 	delicate 	laundries.
Temperature selectionIn 	models 	equipped 	with 	Temperature 	Adjustment	
button, 	you 	can 	wash 	your 	clothes 	at 	the 	desired	
temperature 	by 	using 	this 	button.
A  To prevent damage on your laundry, do 
not select a temperature that exceeds the 
one recommended for your laundry in the 
“Programme 	and 	consumption 	table".
Spin speed selectionIn 	models 	equipped 	with 	Spin 	Speed 	Adjustment	
button, 	you 	can 	spin 	your 	laundry 	at 	the 	desired	
speed 	by 	using 	this 	button.
In 	models 	not 	equipped 	with 	Spin 	Speed	
Adjustment 	button, 	spin 	will 	be 	performed 	at 	the	
recommended speed for the selected programme.
C	 If 	you 	wish 	to 	take 	out 	your 	laundry 	without	
spinning, switch the Spin Speed Adjustment 
button 	to 	No 	Spin 	position.