BEKO WMD 25145 T User Manual
Have a look at the manual BEKO WMD 25145 T User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 187 Beko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Washing Machine Waschmaschine Lave-linge WasmachineWMD 25125 M WMD 25145 M
2 - EN 1 Warnings General Safety• Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorized Service for repair. • Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned. • Your washing machine is designed to continue operating in the event of a power interruption. Your machine will not resume its program when the power restores. Press the “Start/Pause/Cancel” button for 3 seconds to cancel the program (See, Canceling a Program) • There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine. • Some problems you may encounter may be caused by the infrastructure. Press "Start/Pause/Cancel" button for 3 seconds to cancel the program set in your machine before calling the authorized service. First Use• Carry out your first washing process without loading your machine and with detergent under “Cottons 90°C” program. • Ensure that the cold and hot water connections are made correctly when installing your machine. • If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker. • While using with or without a transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding. • Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives. Intended use• This product has been designed for home use. • The appliance may only be used for washing and rinsing of textiles that are marked accordingly. Safety instructions• This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. • The supply and draining hoses must always be securely fastened and remain in an undamaged state. • Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! • Never open the loading door or remove the filter while there is still water in the drum. • Unplug the machine when it is not in use. • Never wash down the appliance with a water hose! There is the risk of electric shock! • Never touch the plug with wet hands. Do not operate the machine if the power cord or plug is damaged. • For malfunctions that cannot be solved by information in the operating manual: • Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent. You may refer to your local agent or solid waste collection center in your municipality to learn how to dispose of your machine. If there are children in your house... • Keep children away from the machine when it is operating. Do not let them tamper with the machine. • Close the loading door when you leave the area where the machine is located. Downloaded From WashingMachine-Manual.com Manualë
3 - EN 2 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locksA Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all the bolts with a spanner until they rotate freely (“C”) 2. Remove transportation safety bolts by turning them gently. 3. Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”) C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future. C Never move the appliance without the transportation safety bolts properly fixed in place! Adjusting the feetA Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged. 1. Manually (by hand) loosen the lock nuts on the feet. 2. Adjust them until the machine stands level and firmly. 3. Important: Tighten all lock nuts up again. Connecting to the water supply.Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1 MPa). • Connect the special hoses supplied with the machine to the water intake valves on the machine. • If you are going to use your double water- inlet machine as a single (cold) water-inlet unit, you must install the stopper*, supplied with your machine to the hot water valve. • If you want to use both water inlets of the product, you can connect the hot water hose after removing the stopper and gasket group from the hot water valve. * Applies for the products supplied with a blind stopper group. • Models with a single water inlet should not be connected to the hot water tap. When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses. Connecting to the drainThe water discharge hose can be attached to the edge of a washbasin or bathtub. The drain hose should be firmly fitted into the drain as to not get out of its housing. Important: • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. • The hose should be attached to a height of at least 40 cm, and 100 cm at most. • In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out wet. • The hose should be pushed into the drainage for more than 15 cm. If it is too long you may have it shortened. • The maximum length of the combined hoses must not be longer than 3.2 m. Downloaded From WashingMachine-Manual.com Manualë
4 - EN Electrical connectionConnect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations. • The voltage and the allowed fuse protection are specified in the section “Technical Specifications”. • The specified voltage must be equal to your mains voltage. • Connection via extension cords or multi- plugs should not be made. B A damaged power cable must be replaced by a qualified electrician. B The appliance must not be operated unless it is repaired! There is the risk of electric shock! 3 Initial preparations for washing Preparing clothes for washingLaundry items with metal attachments such as, bras, belt buckles and metal buttons will damage the machine. Remove metal attachments or place the items in a clothing bag, pillow case, or something similar. • Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. • Place small items like infants’ socks and nylon stockings, etc. in a laundry bag, pillow case or something similar. This will also save your laundry from getting lost. • Wash “machine washable” or “hand washable” labeled products only with an appropriate program. • Do not wash colors and whites together. New, dark colored cottons may release a lot of dye. Wash them separately. • Use only dyes/color changers and lime removers suitable for machine wash. Always follow the instructions on the packaging. • Wash trousers and delicate clothes turned inside out. Correct load capacityC Please follow the information in the "Program Selection Table". Washing results will degrade when the machine is overloaded. Loading doorThe door locks during program operation and the Door Locked Symbol lights up. The door can be opened when the symbol fades out. Detergents and softenersDetergent Drawer The detergent drawer is composed of three compartments: The detergent dispenser may be in two different types according to the model of your machine. – (I) for prewash – (II) for main wash - (III) siphon – ( ) for softener Detergent, softener and other cleaning agents Add detergent and softener before starting the washing program. Never open the detergent dispenser drawer while the washing program is running! When using a program without pre-wash, no detergent should be put into the pre-wash compartment (Compartment no. I). Detergent quantity The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness. • Do not use amounts exceeding the quantities recommended on the package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection. • Never exceed the (> max
5 - EN 4 Selecting a Program and Operating Your Machine Control panel 1 - Spin Speed Adjustment Knob * 2 - Time Delay Button * 3 - Temperature Adjustment Knob * 4 - Start/Pause/Cancel Button 5 - Auxiliary Function Keys 6 - Program Selection Knob7 - On/Off Button 8 - Program Follow-up Indicators * 9 - Child-proof Lock Indicator * * According to your machine’s model Turning the machine on You can prepare the machine for program selection by pressing the “On/Off” button. When the “On/Off” button is pressed, the “Ready” light illuminates indicating that the door is ulocked. Press the “On/Off” button again to shut down the machine. Program selectionSelect the appropriate program from the program table and the following washing temperature table according to type, amount and degree of soiling of the laundry. Select the desired program with the program selection button. C Each of these programs consist of a complete washing process, including wash, rinse and, if required, spin cycles. 90˚C Normally soiled, white cottons and linens. 60˚C Normally soiled, fade proof colored linens, cottons or synthetic clothes and lightly soiled white linens 40˚C- 30°C- Cold Blended clothes including synthetics and woolens as well as delicates. C Programs are limited with the highest spin speed appropriate for that particular type of cloth. Main programs Depending on the type of textile, the following main programs are available: •Cottons You can wash your durable clothes with this program. Your laundry will be washed with vigorous washing movements during a longer washing cycle. •Synthetics You can wash your less durable clothes on this program. Gentler washing movements Sans EssorageOuverture de Porte 600 800 1000 1200 1400 Marche Arrêt Coton Synthétique Laine Délicat 30° 60° 40° 40° 90° 60° 40° 40° 30° Lavage Express EssorageRinçage Lavage Rinçage Intensif Vidange 30° 60° 40°Annulation 3 sec. Départ /Pause3 6 9 Start Stop Start/Pause Reset3 sec Express Wassen RinçagePlus Extra Spoelen Deur openen WassenSpoelenCentrifugeren Niet Centrifugeren Synthetisch Katoen Wol Spoelen AfvoerenDelicaatIntensief Départ Différé Uitgestelde Start Prélavage Voorwas 9 7 4 5 1 8 6 2
6 - EN and a shorter washing cycle is used compared to the “Cottons” program. It is recommended for your synthetic clothes (such as shirts, blouses, synthetic/cotton blended garments, etc.). For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended. •Delicates You can wash your delicate clothes on this program. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” program. •Woolens You can wash your machine-washable woolen garments on this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. •Hand Wash You can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes. Additional programs For special cases, there are also extra programs available: C Additional programs may differ according to the model of your machine. • Baby Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people. • Intensive You can wash your durable and heavily soiled clothes on this program. This program washes for a longer time and an extra rinse cycle will be made compared to the “Cottons” program. You can use it for your heavily soiled clothes that you wish to be rinsed gently. • Mix You can use this program to wash cottons and synthetics together without needing to sort them. • Mini This program is used to quickly wash (30 minutes) a small amount of lightly soiled cotton garments. Special programsFor specific applications, you can select any of the following programs: • Rinse This program is used when you want to rinse or starch separately. • Spin This program spins with maximum possible rpm in the default setting. C You should use a lower spin speed for delicate laundries. • Pump This program is used to discharge the water of the clothes soaked into water in the machine. Spin Speed selectionYou can have your clothes spun at the maximum rpm selection on your machine by using the selection knob in models equipped with an rpm selection knob. In order to protect your clothes, your machine will not spin above 800 rpm on synthetic programs and 600 rpm on woolens program. Furthermore, if you want to skip the spin cycle and take your clothes out, turn the rpm selection knob to “no spin” position. In machines not equipped with a spin speed selection knob, the machine will spin in the maximum possible rpm in the default setting of the selected program. Downloaded From WashingMachine-Manual.com Manualë
7 - EN Program selection and consumption table • : Selectable * : Automatically selected, not cancellable. **: Energy Label programme (EN 60456) Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage. C The auxiliary functions in the table may differ according to the model of your machine. Programme Max. Load (kg) Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) Prewash Quick Wash Rinse Plus Anti-Creasing Rinse Hold Spin speed reduction No Spin Cottons905150 501.70 ••••••• Cottons 60**5120 470.95 ••••••• Cottons 405120 450.65 ••••••• Intensive 605160 551.00 •••• Synthetics 602.5 115 500.95 ••••••• Synthetics 402.5 100 500.50 ••••••• Synthetics 302.5 90500.30 ••••••• Delicate 40270 550.35 ••••• Woollens 401.5 55450.30 •••• Hand wash 30140 350.15 •• Downloaded From WashingMachine-Manual.com Manualë
8 - EN Auxiliary functionsAuxiliary function selection keys Select the required auxiliary functions before starting the program. C Auxiliary function buttons may differ according to the model of your machine. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. Auxiliary function that is not compatible with the program cannot be selected. (see “Program Selection Table”) Pre-wash A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent and time. Pre-wash without detergent is recommended for lace and curtains. Quick wash This function can be used for cottons and synthetics programs. It decreases the washing times for lightly soiled laundries and also the number of rinsing steps. Shortens the program time approximately 45 minutes. Rinse plus With this function, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remainder detergent on the clothes will be decreased. Rinse hold If you do not want to unload your clothes immediately after the cotton, synthetics, woolen and delicate fabrics program, you may release your clothes inside the machine in the last rinsing water by pressing the rinse hold button in order to prevent your clothes become wrinkled. You can spin by pressing “Start/Pause/Cancel” button after this process. Anti-creasing This function reduces drum movement and limits the spinning speed to prevent creasing. In addition, washing is carried out at a higher water level. C Use this function for delicate laundries that crease easily. C Whenever you select this auxiliary function, load your machine with half of the maximum laundry specified in the program table. Spin speed reduction You may use the speed reduction button whenever you wish to spin your clothes below the maximum spin speed. When speed reduction button is pressed, spin speed will be at the minimum rpm given on the panel. No spin You may use this program if you do not want to spin your clothes at the end of cottons, synthetics, woolen or delicate programs. Time delay If you wish to wash your clothes at a later time in machines equipped with a time delay button, the time delay function allows you to delay the program start time for 3, 6 or 9 hours. When the time delaying button is pressed once, a 3 hours delay is selected. When the same button is pressed again, 6 hours; and if pressed once more, a 9 hours delay will be selected. If the time delaying button is pressed one more time, time delaying function will be cancelled. Time delay function starts countdown after setting the desired time delay and pressing the “Start/Pause/Cancel” button. C More laundry may be loaded during the time delay period. Changing and canceling the time delay. Press the “Start/Pause/Cancel” button to switch the machine to “Pause” mode. Press “Start/Pause/Cancel” button to start the program after making the new time delay selection. Starting the ProgramPress “Start/Pause/Cancel” button to start the program. “Start/Pause/Cancel” button will light up to indicate that the program has started. The door is locked and the “Ready” light fades. Progressing a programProgress of a running program is shown through the program follow-up indicator. At the beginning of every program step, the relevant indicator lamp will light up and light of the completed step will turn off. C If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system might have been activated because of excessive unbalanced distribution of laundry in the machine. Changing the program after the program has started You can use this feature after your machine has started to wash different textile groups in the same batch of clothes under higher or lower temperatures. You must cancel the ongoing program in order to change the washing program. For example, press and hold the “Start/Pause/ Cancel” button for 3 seconds in order to select Downloaded From WashingMachine-Manual.com Manualë
9 - EN “Cottons 40” program instead of “Cottons 60” program. Select the “Cottons 40” program. Start the program. Switching the machine to standby mode Press “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door. Child-proof lockYou can protect the appliance from being tampered by children by means of the child- proof lock. In this case, no change can be made in the running program. The machine is switched to child-lock by pressing the 1st and 2nd auxiliary functions from the left for 3 sec. Child-proof lock lamp on the program follow-up indicator will light up when the child-proof lock is activated. To deactivate the child-proof lock, press the same buttons for 3 sec. Ending the program through canceling In order to cancel the selected program, press the “Start/Pause/Cancel” button for 3 seconds. You can select and start a new program when the “Ready” light is lit. The “Spin” light illuminates if the cancellation process is activated in the middle of the program and the machine can either drain all the water or can take in water 3 times at most to cool down the clothes and perform the draining process. The program which is selected first will keep on going even if the position of the program selection button is changed. A new program can be selected or started after “Program is cancelled” in order to change the washing program. End of program The “Ready” lamp on the program follow-up indicator will light up when the program comes to an end. The door can be opened and the machine is ready for a second cycle now. Press the “On/Off” button to shut down the machine. 5 Maintenance and cleaning Detergent DrawerRemove any powder residue buildup in the drawer. To do this; 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. C If more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. 2. Wash the dispenser drawer and the siphon with plenty of lukewarm water in a washbasin. 3. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location. Inlet water filtersThere is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty. • Close the taps. • Remove the nuts of the water intake hoses to clean the surfaces of the filters on the water intake valves with an appropriate brush. • If the filters are very dirty, you can pull them out by means of pliers and clean them. • Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water. • Replace the gaskets and filters carefully to their places and tighten the hose nuts by hand. Downloaded From WashingMachine-Manual.com Manualë
10 - EN• Place a large container at the end of the hose. Drain the water off into the container by pulling out the plug at the end of the hose. If the amount of water to be drained off is greater than the volume of the container, replace the plug, pour the water out, then resume the draining process. • After draining process is completed, replace the plug into the end of the hose and fit the hose back into its place. If your product is not supplied with an emergency drain hose, do the following as shown in the figure below: • Place a large container in front of the filter to receive water flowing from the filter. • Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water. • When there is no water left, turn the pump filter until it is completely loose and remove it. • Clean any residues inside the filter as well as fibers, if any, around the propeller region. • If your product has a water jet feature, be sure to fit the filter into its housing in the pump. Never force the filter while replacing it into its housing. Fit the filter fully into its housing; otherwise, water may leak from the filter cap. 4- Close the filter cap. Close the two-piece filter cap of your product by pushing the tab on it. Close the one-piece filter cap of your product by fitting the tabs on the bottom into their positions and pushing the upper part of it. Draining any remaining water and cleaning the pump filter Your product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water. • If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump filter. In addition, water may have to be drained off completely in the following cases: • before transporting the machine (e.g. when moving house) • when there is the danger of frost In order to clean the dirty filter and discharge the water; 1- Unplug the machine to cut off the supply power. A There may be water at 90°C in the machine. Therefore, the filter must be cleaned only after the inside water is cooled down to avoid hazard of scalding. 2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of your machine. If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself. If it is composed of one piece, hold it from both sides and open it by pulling out. 3- An emergency drain hose is supplied with some of our models. Others are not supplied with this item. If your product is supplied with an emergency drain hose, do the following as shown in the figure below: • Pull out the pump outlet hose from its housing. Downloaded From WashingMachine-Manual.com Manualë