Home > Beko > Washing Machine > BEKO WMD 25145 T User Manual

BEKO WMD 25145 T User Manual

Here you can view all the pages of manual BEKO WMD 25145 T User Manual. The Beko manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.

Page 1

Washing Machine 
Waschmaschine 
Lave-linge 
WasmachineWMD 25125 M
WMD 25145 M
 

Page 2

2 - EN
1 Warnings
General Safety•	 Never	place	your	machine	on	a	carpet	covered	floor.	Otherwise,	lack	of	airflow	
from	below	of	your	machine	may	cause	
electrical	parts	to	overheat.	This	may	cause	
problems	with	your	washing	machine.
•	 If	the	power	cable	or	mains	plug	is	 damaged	you	must	call	Authorized	Service	
for	repair.
•	 Fit	the	drain	hose	into	the	discharge	 housing	securely	to	prevent	any	water	
leakage	and	to	allow	machine	to	take	in	
and	discharge	water	as	required.	It	is	very	
important...

Page 3

3 - EN
2 Installation
Removing packaging 
reinforcement
Tilt	the	machine	to	remove	the	packaging	
reinforcement.	Remove	the	packaging	
reinforcement	by	pulling	the	ribbon.
Opening the transportation locksA	 Transportation	safety	bolts	must	be	removed	before	operating	the	washing	
machine!	Otherwise,	the	machine	will	be	
damaged!
1.	 Loosen	all	the	bolts	with	a	spanner	until	 they	rotate	freely	(“C”)
2.	 Remove	transportation	safety	bolts	by	 turning	them	gently.
3.	 Fit	the	covers	(supplied	in	the	bag...

Page 4

4	-	EN
Electrical connectionConnect	the	machine	to	an	earthed	outlet	
protected	by	a	fuse	of	suitable	capacity.
Important:
•		 Connection	should	comply	with	national	regulations.
•		 The	voltage	and	the	allowed	fuse	 protection	are	specified	in	the	section	
“Technical	Specifications”.
•		 The	specified	voltage	must	be	equal	to	 your	mains	voltage.
•		 Connection	via	extension	cords	or	multi- plugs	should	not	be	made.
B	 A	damaged	power	cable	must	be	replaced	by	a	qualified	electrician.
B	 The	appliance...

Page 5

5	-	EN
4  Selecting a Program and Operating Your Machine
Control panel
1	-	 Spin	Speed	Adjustment	Knob	*
2	-	 Time	Delay	Button	*
3	-	 Temperature	Adjustment	Knob	*
4	-	 Start/Pause/Cancel	Button
5	-	 Auxiliary	Function	Keys
6	-	 Program	Selection	Knob7	-	 On/Off	Button
8	-	 Program	Follow-up	Indicators	*
9	-	 Child-proof	Lock	Indicator	*
*	According	to	your	machine’s	model
Turning the machine on	You	can	prepare	the	machine	for	program	
selection	by	pressing	the	“On/Off”	button.	
When	the	“On/Off”	button...

Page 6

6	-	EN
and	a	shorter	washing	cycle	is	used	compared	
to	the	“Cottons”	program.	It	is	recommended	
for	your	synthetic	clothes	(such	as	shirts,	
blouses,	synthetic/cotton	blended	garments,	
etc.).	For	curtains	and	lace,	the	“Synthetic	
40”	program	with	pre-wash	and	anti-creasing	
functions	selected	is	recommended.
•Delicates
You	can	wash	your	delicate	clothes	on	this	
program.	It	has	more	sensitive	washing	
movements	and	does	not	make	intermediate	
spinning	compared	to	“Synthetic”	program.
•Woolens
You	can...

Page 7

7 - EN
Program selection and consumption table
•	:	Selectable
*	:	Automatically	selected,	not	cancellable.
**:	Energy	Label	programme	(EN	60456)
Water	and	power	consumption	and	programme	duration	may	differ	from	the	table	shown,	
subject	to	changes	in	water	pressure,	water	hardness	and	temperature,	ambient	temperature,	
type	and	amount	of	laundry,	selection	of	auxiliary	functions,	and	fluctuations	in	the	supply	
voltage.
C	The	auxiliary	functions	in	the	table	may	differ	according	to	the	model	of	your...

Page 8

8 - EN
Auxiliary functionsAuxiliary function selection keys
Select	the	required	auxiliary	functions	before	
starting	the	program.
C	Auxiliary	function	buttons	may	differ	according	to	the	model	of	your	machine.
Auxiliary function selection
If	an	auxiliary	function	that	should	not	be	
selected	together	with	a	previously	selected	
function	is	chosen,	the	first	selected	function	
will	be	cancelled	and	the	last	auxiliary	function	
selection	will	remain	active.
Auxiliary	function	that	is	not	compatible	
with...

Page 9

9	-	EN
“Cottons	40”	program	instead	of	“Cottons	60”	
program.	Select	the	“Cottons	40”	program.	
Start	the	program.
Switching the machine to standby 
mode
Press	“Start/Pause/Cancel”	button	
momentarily	to	switch	your	machine	to	the	
standby	mode.	Auxiliary	functions	can	be	
cancelled	or	selected	in	accordance	with	
the	step	the	program	is	at.	The	door	can	be	
opened	if	the	water	level	is	suitable.	Laundry	
may	be	added	/	taken	out	by	opening	the	
door.
Child-proof lockYou	can	protect	the	appliance	from...

Page 10

10	-	EN•		 Place	a	large	container	at	the	end	of	the	
hose.	Drain	the	water	off	into	the	container	
by	pulling	out	the	plug	at	the	end	of	the	
hose.	If	the	amount	of	water	to	be	drained	
off	is	greater	than	the	volume	of	the	
container,	replace	the	plug,	pour	the	water	
out,	then	resume	the	draining	process.
•		 After	draining	process	is	completed,	 replace	the	plug	into	the	end	of	the	hose	
and	fit	the	hose	back	into	its	place.
If	your	product	is	not	supplied	with	an	
emergency	drain	hose,	do	the...
Start reading BEKO WMD 25145 T User Manual

Related Manuals for BEKO WMD 25145 T User Manual

All Beko manuals