Barco Rlm R6+ Performer Owners Manual

							8. Image Menu
Image 8-46
Image 8-47
R5976816 RLM R6+ PERFORMER 21/12/200587 
						

							8. Image Menu
88R5976816 RLM R6+ PERFORMER 21/12/2005 
						

							9. Tools Menu
9. TOOLS MENU
Overview
• Overview of the Tools menu
• Introduction to PiP
• PiP select
• PiP add window
• PiP remove window
• PiP layout
•PiPAdjust
9.1 Overview of the Tools menu
Overview
• PiP select
- Full-screen
-2by2raster
- PiP layout 1
- PiP layout 2
- PiP layout 3
• PiP add window...
• PiP remove window...
• PiP layout
-Save
-Saveas
- Rename
-Delete
• PiP adjust
9.2 Introduction to PiP
PiP
PiP stands for Picture in Picture and allows to display multiple windows containing each of them an image. The
windows may be of the video or data type.
What are the different possibilities within the PiP mode ?
The input section of the RLM R6+ Performer projector allows a multitude of combinations of different input signals which may be
projected in the 4 windows of the PiP screen.
The PiP mode allows independent settings for each window:
• Image settings : contrast, brightness, tint, color, ...
• Vertical and horizontal shift of each window all over the screen
• Re-sizing of the window
• Digital Zoom
R5976816 RLM R6+ PERFORMER 21/12/2005
89 
						

							9. Tools Menu
The different PiP configurations
• Full screen2
The full screen is used to display one of the selected sources.
Browse through the sources with thePiP Adjustbutton on the remote control.
•2-by-2raster
2
The screen is divided into 4 subscreens containing 1 Video, 2 Data sources and 1 SDI source.
Image 9-1
• PiPlayout1to33
These are factory layouts, they can be edited and saved.
• Personal layouts
Beside the 2 fixed layouts and the 3 factory layouts, you can create 5 additional (personal) layouts.
2. fixed layout
3. factory layouts
90R5976816 RLM R6+ PERFORMER 21/12/2005 
						

							9. Tools Menu
PiP dedicated buttons
•PiP Adjust :this button allows to focus on one particular window, this window is shown with a white frame surrounding the
selected window.
A source identification box is displayed in the right lower corner.
Image 9-2PressPiP Adjustbutton to move the frame to the next window. This can also be done viaPiP Adjustin the Tools menu.
•PiP:this button allows to browse through the different configurations, it has the same function asPiP selectin the Tools menu.
Since there is only one decoder, when in 2-by-2 configuration, and only video 1 is displayed, this source will
be duplicated at the same position as SDI.
9.3 PiP select
What is possible ?
With PiP select it is possible to switch from one layout to another.
The PiP configuration can also be selected via the dedicated PiP key on the RCU.
How to change the PiP configuration ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem.
3. Press↓to pull down theToolsmenu.
4. Use↑or↓to selectPiP select.
5. Press→to pull down the menu.
6. Use↑or↓to select the desired configuration. (image 9-3)
7. PressENTER.
A white bullet shows the active layout.
R5976816 RLM R6+ PERFORMER 21/12/2005
91 
						

							9. Tools Menu
Image 9-3
9.4 PiP add window
What can be done ?
It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.
Sources which are already used are not selectable. If for instance the PiP layout contains a component video then component video
will be not selectable.
Once added, the window may be changed in several ways to meet particular needs:
• repositioning
• re-sizing
• changing the order
Image 9-4
Add PiP Window
A Select source for window
B Window added
C Move window
D Z-ordering possible
How to add a window ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem.
3. Press↓to pull down theToolsmenu.
4. Use↑or↓to selectPiP add window.(image 9-5)
5. PressENTER.
The source selection menu is displayed. (image 9-6)
In the lower part of the screen appears a 4 steps wizard.
6. Select the source you want to display in the window with the↑and↓. (image 9-7)
7. Resize the new window with the 4 arrow keys. (image 9-8)
8. Position the window on the screen with the 4 arrow keys. (image 9-9)
92
R5976816 RLM R6+ PERFORMER 21/12/2005 
						

							9. Tools Menu
9. Change the viewing order of the displayed images (z-order) with the↑and↓. (image 9-10)
Image 9-5
Source selection
Data on BNCs
Video selector
SDI
DVI
PC
Image 9-6
Pip Wizard step 1 : Select the source you want to display in the window...Image 9-7
Pip Wizard step 2 : Resize this new window with ↑↓ ←→Image 9-8
Pip Wizard step 3 : Position this new window with ↑↓ ←→Image 9-9
Pip Wizard step 4 : Change the order of this new window with ↑↓ 
Image 9-10
9.5 PiP remove window
How to remove a window ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem.
3. Press↓to Pull down theToolsmenu.
4. Use↑or↓to selectPiP remove window.(image 9-11)
5. PressENTER.
In the lower part of the screen appears a wizard. (image 9-12)
The selected window appears surrounded with a white frame.
6. PressPiP ADJUSTto move the frame along the different windows until the desired window is selected.
7. PressENTERto remove that window.
R5976816 RLM R6+ PERFORMER 21/12/2005
93 
						

							9. Tools Menu
Image 9-11
Select window with  → Press  to remove
Image 9-12
9.6 PiP layout
Overview
•PiPSave
• PiP rename layout
• PiP delete layout
9.6.1 PiP Save
What can be done ?
The active layout can be saved or saved as.
When a new layout issaved it is added to thePiP selectmenu.
A fixed layout can be edited (re-sizing, re-positioning,...) but it can not be saved under its original name.
How to save a layout ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem. (image 9-13)
3. Press↓to pull down theToolsmenu.
4. Use↑or↓to selectPiP layout.
5. Press→to pull down the menu.
6. Use↑or↓to selectPiP saveorsave as.
7. PressENTER.
Ifsave ashas been selected, a dialog box is displayed. (image 9-14)
PressENTERto select the input field.
Use←or→to enter the name and exit withBACKorMENU. (numeric values can be added with the remote control)
Ifsavehas been selected, a message box is displayed. (image 9-15)
94
R5976816 RLM R6+ PERFORMER 21/12/2005 
						

							9. Tools Menu
Image 9-13
Save PiP layout
Layout name:
Full-screen
Image 9-14
Message
Current layout has been saved
Press  or  to return
Image 9-15
9.6.2 PiP rename layout
What can be done ?
Thenonfixedlayouts (factory and personal layouts) can be renamed .
The maximal length of the name is 12 characters.
A fixed layout can not be renamed
How to rename a layout ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem. (image 9-16)
3. Press↓to pull down theToolsmenu.
4. Use↑or↓to selectPiP layout.
5. Press→to pull down the menu.
6. Use↑or↓to selectRename.
7. PressENTER.
A dialog box is displayed. (image 9-17)
8. Use↑or↓to select the layout to be renamed.
9. PressENTERto select.
A dialog box is displayed. (image 9-18)
PressENTERto activate the input box.
Use←or→to enter the name and exit withBACKorMENU(numeric values can be entered with the remote control).
Image 9-16
R5976816 RLM R6+ PERFORMER 21/12/200595 
						

							9. Tools Menu
Rename PiP layout
PIP Layout 1
PIP Layout 2
PiP Layout 3
Own layout 1
Own layout 2
Image 9-17
Rename PiP layout
New name:
Own layout 1
Image 9-18
9.6.3 PiP delete layout
What can be done ?
The non fixed layouts (factory and personal layouts) can be deleted.
The fixed layouts and the active layout can not be deleted
How to delete a layout ?
1. PressMENUto activate the menu bar.
2. Press→to select theToolsitem.
3. Press↓to pull down theToolsmenu .
4. Use↑or↓to selectPiP layout.
5. Press→to pull down the menu.
6. Use↑or↓to selectDelete.
7. PressENTER.
A dialog box is displayed. (image 9-19)
8. Use↑or↓to select the layout to be deleted.
9. PressENTERto confirm.
The layout is deleted and disappears from the dialog box.
Delete PiP layout
PIP Layout 1
PIP Layout 2
PiP Layout 3
Own layout 1
Own layout 2
Image 9-19
9.7 PiP Adjust
What can be done ?
PiP adjust allows to browse through the windows in the active layout, a white frame indicates the window which has the focus.
This way, independent settings (picture settings, ...) are possible for each window.
96
R5976816 RLM R6+ PERFORMER 21/12/2005