Home > Barco > Projector > Barco Projector Cineversum 80 Quickstart Manual

Barco Projector Cineversum 80 Quickstart Manual

Here you can view all the pages of manual Barco Projector Cineversum 80 Quickstart Manual. The Barco manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 151

21. Maintenance Indicators
21.2 Display Diagnosis
What info is displayed
Diagnosis  RGB-Loop:     On
  Panel:             On
  Temperature:  ok
  Lamp:             ok
  Power:            ok
  FPGA:            ok
  Cool Down:    No
  Fan:                ok
Back
Cine VERSUM r01
Main Menu/Installation/Display List/Display Settings/Diagnosis
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output:...

Page 152

21. Maintenance Indicators
For Cine VERSUM 120 only
Normal mode0: Normal projector mode
1: Flash programming mode
Command/Parameter Error0: No error
1: Error
Download Complete0: Incomplete
1: Complete
System Reset0: System has not been reset
1: System has not been reset since last status read
System Status0: System failure
1: System OK
System Ready0: Busy
1: Ready
21.3 ColorWheel IndexCine VERSUM 80
How to adjust the colorwheel index
1. Select itemCW INDEXin the display info menu by rotating the jog dial...

Page 153

21. Maintenance Indicators
0 720 CW  Index    310
Use test pattern
   Yes
   No
Cine VERSUM r01
Main Menu/Installation/Display List/Display Settings/CW Index
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
BackDisplay List1 CV50  On
2 CV120 On
3 CV80 On
Back
Display Settings Switch OFF
 Display Info
 Rename
 IR Address 009
 Diagnosis
 CW  Index...

Page 154

21. Maintenance Indicators
Test patterns generated in the Cine VERSUM Master
Outline
Hatch
Colorbars
MultiburstCheckerboard
PurityAlphanumeric
Page Character
Green
RedBlue
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456
123456789AZERTYUIOPabhdksol123456...

Page 155

21. Maintenance Indicators
Test patterns generated in the Cine VERSUM 120
Cine VERSUM r01
Main Menu/Installation/Display List/Display Settings/Testpatterns
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
BackDisplay List1 CV50  On
2 CV120 On
3 CV80 On
Back
Display Settings Switch OFF
 Display Info
 Rename
 IR Address 009
 Diagnosis
 Orientation
 Test...

Page 156

21. Maintenance Indicators
152R5976468 CINE VERSUM SYSTEM 03112003 

Page 157

Index
INDEX
A
Address 93–94, 141
Changing 94
Cine VERSUM Master 141
Default address of the modules 93
Reading out 93
Reading out/Changing 93
Analog controls 123
Master 123
Analog controls adjustment 123
Display 123
Analog controls Display 124–125
Via Cine VERSUM Master 124
Via Display 125
C
Ceiling mount 40
Cine VERSUM 120 40
Cine VERSUM 80 40
Cine VERSUM 120 8, 13
Safety instructions 8
Cine VERSUM 50 7, 12, 41
Abstract 12
Installation 41
Safety instructions 7
Cine VERSUM 80 8, 13, 28
Abstract 13...

Page 158

Index
Adjustment 116
Alignment 114
Selection 115
Input module 58
Installation 58
Input modules 105
Setup 105
Input source 99, 102
File copy 102
File identification 99
File rename 102
Installation 7
Safety precautions 7
Installation CV50 41–42
Table mount kit 42
Wall mount kit 41
Installation Guidelines 33
Condition Check 33
Screen Type 33
Internal pattern 128
L
Lamp mode 82–83
Economic/Normal 83
Set up 82
Single/Dual 82
Lamp selection 83
Lamp 1 or 2 83
Lens 34
Cleaning 34
Lens control 38
Location of...

Page 159

Index
Switching In/Out standby 89–91
Using the jog dial 89
Using the Remote Control 90–91
On address Cine VERSUM Master 90
On address pointed display 91
via Cine VERSUM Master 89
Switching linked displays 89
To and Out standby 89
T
Test pattern 149
Cine VERSUM 120 149
Cine VERSUM 80 149
Cine VERSUM Master 149
U
Unpacking 15–18
Cine VERSUM 120 17
Cine VERSUM 50 18
Cine VERSUM 80 16
Cine VERSUM Master 15
W
White peak 109
Set up 109
R5976468 CINE VERSUM SYSTEM 03112003
155 

Page 160

Index
156R5976468 CINE VERSUM SYSTEM 03112003 
Start reading Barco Projector Cineversum 80 Quickstart Manual

Related Manuals for Barco Projector Cineversum 80 Quickstart Manual

All Barco manuals