Barco Projector Cineversum 80 Quickstart Manual

19. Picture in Picture (PIP)
• F1-F2-F4 and F5: changing the place of the PIP window in the projected image.
Image 19-3
Position of the PIP window
• F1-F2-F4 and F5: enlarging the PIP window when pressed a second time.
Image 19-4
PIP window enlarged
A Normal PIP window
B Enlarged PIP window
• F3: swapping the main source and the PIP source.
Image 19-5
Image swapping
R5976468 CINE VERSUM SYSTEM 03112003137 

19. Picture in Picture (PIP)
138R5976468 CINE VERSUM SYSTEM 03112003 

20. Cine VERSUM Master Settings & Info
20. CINE VERSUM MASTER SETTINGS & INFO
Overview
• Service Menu
• Cine VERSUM Master Identification
• Cine VERSUM Master Password
• CineVERSUMMasterAddress
Entering the Installation as well as the Service menu can be password protected. If this should be the case,
trying to enter both menus is preceded by a pop up menu, requesting to enter password.
20.1 Service Menu
How to enter the service menu
1. Select the INSTALLATION menu (see Loading a File, page 97).
2....

20. Cine VERSUM Master Settings & Info
Explanation about the identification items
The identification menu shows the general information of the Cine VERSUM Master status.
• IR Address: typical address of the Cine VERSUM Master, to be used by the Remote Control to allow communication.
• Soft Version: the loaded software version. This version number can be useful when calling for service assistance.
• Baudrate PC: transfer speed for communication with an IBM PC (or compatible) or MAC. The baudrate must be...

20. Cine VERSUM Master Settings & Info
How to change the password
1. Select itemMODIFY PASSWORDby rotating the jog dial on the Master or the↑or↓keys on the Remote Control.
2. Press the jog dial on the Master or the keyENTERon the Remote Control to confirm.
The sub menu NEW PASSWORD appears on-screen and in the graphical display, including the possibility to enter 4 digits,
composing the new password. (menu 20-4)
3. Start with filling in the new name, (Always 4 characters) as follows:
- Pressing the...

20. Cine VERSUM Master Settings & Info
Reading out the stored address in the Cine VERSUM Master
• Point the front of the Remote Control at the IR sensor of the Cine VERSUM Master.
• Press the address key on the Remote Control.
Image 20-1
• A text box appears on-screen and in the graphical display on the Cine VERSUM Master indicating the stored address.
MESSAGE
IR Address: 1
Menu 20-5
20.4.2 Cine VERSUM Master Address change
How to change the IR Address
The IR address of the Cine VERSUM Master can be...

20. Cine VERSUM Master Settings & Info
20.4.3 Selecting the Transmission Speed
How to set the transmission speed of the RS232 connection
1. Select itemSERIAL COMMUNICATIONin the Service menu by rotating the jog dial on the Master or the↑or↓keys on the
Remote Control.
2. Press the jog dial on the Master or the key ENTER on the Remote Control to confirm.
The sub menu SERIAL COMMUNICATION appears on-screen and in thegraphical display, including the possibility to set the
Baudrate (transmission speed), the...

20. Cine VERSUM Master Settings & Info
20.4.5 RS422 data bus termination
How to terminate the RS422 data bus
The last control unit on the RS422 data bus has to be terminated.
1. Select itemTERMINATIONin the Serial Communication menu by rotating the jog dial on the Master or the↑or↓keys on the
Remote Control (Selecting the Transmission Speed, page 143.). (menu 20-9)
2. Press the jog dial on the Master or theENTERkeyontheRemoteControltosettheterminationtoON.
3. PressEXITon the Remote Control or...

21. Maintenance Indicators
21. MAINTENANCE INDICATORS
Overview
• Display Information
• Display Diagnosis
• ColorWheel IndexCine VERSUM 80
• Test Pattern
21.1 Display Information
What info is displayed
InstallationInput Slots
File Service
Display List
Internal Pattern
W hen no signal
Source Transition
OSD configuration
Language
Keystone
Global Keystone:Yes
Output: [Largest]
Default Input Balance
Back
Display InfoSerial nr: 25416345
Type: CineVERSUM 50
Date: xx/xx/xx
Temperature: 52
Runtime: 87h
Software:...

21. Maintenance Indicators
Common for Cine VERSUM 50 – Cine VERSUM 80 and Cine VERSUM 120
RuntimeTotal operation time of the display
SoftwareInstalled software
DeserializerConverts the serial data into parallel data
For Cine VERSUM 80 only
FormatterSerial number
Lamp typeKind of the display
Color Wheel IDColor wheel identification number
RuntimeVia sub menu info about lamp run time and Color wheel run time, split up in ranges of
temperature. .
Lamp HistoryLamp history is kept up to date in the lamp...